This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Pau Espin Pedrol gerrit-no-reply at lists.osmocom.orgPau Espin Pedrol has submitted this change and it was merged. ( https://gerrit.osmocom.org/11932 )
Change subject: bts-trx: (n)ack PDCH DEACT only after TRX answered SETSLOT
......................................................................
bts-trx: (n)ack PDCH DEACT only after TRX answered SETSLOT
Before this patch, PDCH DEACT was (n)acked to the BSC without taking
into account if TRX succeeded or failed to set the TS:
20181123044720655 DRLL rsl.c:2523 (bts=0,trx=0,ts=0,ss=0) Rx RLL DATA_REQ Abis -> LAPDm
20181123044720700 DRSL rsl.c:2805 (bts=0,trx=0,ts=6,pchan=TCH/F_PDCH as PDCH) ss=0 Rx RSL IPAC_PDCH_DEACT
20181123044720700 DRSL rsl.c:2205 (bts=0,trx=0,ts=6,pchan=TCH/F_PDCH as PDCH) Request to PDCH DEACT, but lchan is still active
20181123044720700 DRSL rsl.c:2131 (bts=0,trx=0,ts=6,ss=0) Tx PDCH DEACT NACK (cause = 0x0f)
20181123044720700 DPCU pcu_sock.c:124 Sending info
20181123044720700 DPCU pcu_sock.c:139 BTS is up
20181123044720700 DPCU pcu_sock.c:232 trx=0 ts=7: available (tsc=7 arfcn=868)
20181123044720703 DPCU pcu_sock.c:608 Deactivate request received: TRX=0 TX=6
20181123044720703 DL1C l1sap.c:1519 deactivating channel chan_nr=TCH/F on TS6 trx=0
20181123044720703 DTRX trx_if.c:242 Enqueuing TRX control command 'CMD NOHANDOVER 6 0'
20181123044720703 DL1C l1sap.c:648 deactivate confirm chan_nr=TCH/F on TS6 trx=0
20181123044720703 DRSL rsl.c:714 (bts=0,trx=0,ts=6,ss=0) not sending REL ACK
20181123044720703 DRSL rsl.c:2264 (bts=0,trx=0,ts=6,ss=0) PDCH DEACT operation: channel disconnected, will reconnect as TCH
20181123044720703 DL1C scheduler.c:593 Configuring multiframe with TCH/F+SACCH trx=0 ts=6
20181123044720703 DTRX trx_if.c:242 Enqueuing TRX control command 'CMD SETSLOT 6 1'
20181123044720703 DL1C l1_if.c:780 (bts=0,trx=0,ts=6) bts_model_ts_connect(as_pchan=TCH/F) success, calling cb_ts_connected()
20181123044720703 DRSL rsl.c:2339 (bts=0,trx=0,ts=6,ss=0) PDCH DEACT operation: timeslot connected as TCH/F
20181123044720703 DRSL rsl.c:2440 (bts=0,trx=0,ts=6,ss=0) TCH/F_PDCH switched to TCH/F mode (ts->flags == 0)
20181123044720703 DRSL rsl.c:2103 (bts=0,trx=0,ts=6,ss=0) Tx PDCH DEACT ACK
20181123044720704 DTRX trx_if.c:492 Response message: 'RSP NOHANDOVER 0 6'
20181123044720705 DTRX trx_if.c:492 Response message: 'RSP SETSLOT 0 6 1'
Change-Id: I888de761b65c3ea8bfe623fcf009f3b2b57c926c
---
M src/osmo-bts-trx/l1_if.c
M src/osmo-bts-trx/trx_if.c
M src/osmo-bts-trx/trx_if.h
3 files changed, 81 insertions(+), 9 deletions(-)
Approvals:
Neels Hofmeyr: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/src/osmo-bts-trx/l1_if.c b/src/osmo-bts-trx/l1_if.c
index da1b554..290ceee 100644
--- a/src/osmo-bts-trx/l1_if.c
+++ b/src/osmo-bts-trx/l1_if.c
@@ -25,6 +25,7 @@
#include <stdlib.h>
#include <stdbool.h>
#include <errno.h>
+#include <inttypes.h>
#include <osmocom/core/talloc.h>
#include <osmocom/core/bits.h>
@@ -58,6 +59,16 @@
[GSM_PCHAN_UNKNOWN] = 0,
};
+static enum gsm_phys_chan_config transceiver_chan_type_2_pchan(uint8_t type)
+{
+ int i;
+ for (i = 0; i < _GSM_PCHAN_MAX; i++) {
+ if (transceiver_chan_types[i] == type)
+ return (enum gsm_phys_chan_config) i;
+ }
+ return GSM_PCHAN_UNKNOWN;
+}
+
struct trx_l1h *trx_l1h_alloc(void *tall_ctx, struct phy_instance *pinst)
{
struct trx_l1h *l1h;
@@ -140,6 +151,34 @@
LID_SACCH, 0);
}
+static void l1if_setslot_cb(struct trx_l1h *l1h, uint8_t tn, uint8_t type, int rc)
+{
+ struct phy_instance *pinst = l1h->phy_inst;
+ struct gsm_bts_trx *trx = pinst->trx;
+ struct gsm_bts_trx_ts *ts;
+ enum gsm_phys_chan_config pchan;
+
+ if (tn >= TRX_NR_TS) {
+ LOGP(DL1C, LOGL_ERROR, "transceiver (%s) SETSLOT invalid param TN (%" PRIu8 ")\n",
+ phy_instance_name(pinst), tn);
+ return;
+ }
+
+ pchan = transceiver_chan_type_2_pchan(type);
+ if (pchan == GSM_PCHAN_UNKNOWN) {
+ LOGP(DL1C, LOGL_ERROR, "transceiver (%s) SETSLOT invalid param TS_TYPE (%" PRIu8 ")\n",
+ phy_instance_name(pinst), type);
+ return;
+ }
+
+ ts = &trx->ts[tn];
+ LOGP(DL1C, LOGL_DEBUG, "%s l1if_setslot_cb(as_pchan=%s),"
+ " calling cb_ts_connected(rc=%d)\n",
+ gsm_ts_name(ts), gsm_pchan_name(pchan), rc);
+ cb_ts_connected(ts, rc);
+}
+
+
/*
* transceiver provisioning
*/
@@ -196,7 +235,7 @@
if (l1h->config.slottype_valid[tn]
&& !l1h->config.slottype_sent[tn]) {
trx_if_cmd_setslot(l1h, tn,
- l1h->config.slottype[tn]);
+ l1h->config.slottype[tn], l1if_setslot_cb);
l1h->config.slottype_sent[tn] = 1;
}
}
@@ -775,8 +814,5 @@
if (rc)
cb_ts_connected(ts, rc);
- LOGP(DL1C, LOGL_NOTICE, "%s bts_model_ts_connect(as_pchan=%s) success,"
- " calling cb_ts_connected()\n",
- gsm_ts_name(ts), gsm_pchan_name(as_pchan));
- cb_ts_connected(ts, 0);
+ /* cb_ts_connected will be called in l1if_setslot_cb once we receive RSP SETSLOT */
}
diff --git a/src/osmo-bts-trx/trx_if.c b/src/osmo-bts-trx/trx_if.c
index abe6846..8914557 100644
--- a/src/osmo-bts-trx/trx_if.c
+++ b/src/osmo-bts-trx/trx_if.c
@@ -189,6 +189,8 @@
/*! Send a new TRX control command.
* \param[inout] l1h TRX Layer1 handle to which to send command
* \param[in] criticial
+ * \param[in] cb callback function to be called when valid response is
+ * received. Type of cb depends on type of message.
* \param[in] cmd zero-terminated string containing command
* \param[in] fmt Format string (+ variable list of arguments)
* \returns 0 on success; negative on error
@@ -196,7 +198,7 @@
* The new ocommand will be added to the end of the control command
* queue.
*/
-static int trx_ctrl_cmd(struct trx_l1h *l1h, int critical, const char *cmd,
+static int trx_ctrl_cmd_cb(struct trx_l1h *l1h, int critical, void *cb, const char *cmd,
const char *fmt, ...)
{
struct trx_ctrl_msg *tcm;
@@ -231,6 +233,7 @@
tcm->params_len = 0;
}
tcm->critical = critical;
+ tcm->cb = cb;
/* Avoid adding consecutive duplicate messages, eg: two consecutive POWEROFF */
if(pending)
@@ -249,6 +252,7 @@
return 0;
}
+#define trx_ctrl_cmd(l1h, critical, cmd, fmt, ...) trx_ctrl_cmd_cb(l1h, critical, NULL, cmd, fmt, ##__VA_ARGS__)
/*! Send "POWEROFF" command to TRX */
int trx_if_cmd_poweroff(struct trx_l1h *l1h)
@@ -315,9 +319,9 @@
}
/*! Send "SETSLOT" command to TRX: Configure Channel Combination for TS */
-int trx_if_cmd_setslot(struct trx_l1h *l1h, uint8_t tn, uint8_t type)
+int trx_if_cmd_setslot(struct trx_l1h *l1h, uint8_t tn, uint8_t type, trx_if_cmd_setslot_cb *cb)
{
- return trx_ctrl_cmd(l1h, 1, "SETSLOT", "%d %d", tn, type);
+ return trx_ctrl_cmd_cb(l1h, 1, cb, "SETSLOT", "%d %d", tn, type);
}
/*! Send "RXTUNE" command to TRX: Tune Receiver to given ARFCN */
@@ -374,6 +378,7 @@
char cmd[50];
char params[100];
int status;
+ void *cb;
};
static int parse_rsp(const char *buf_in, size_t len_in, struct trx_ctrl_rsp *rsp)
@@ -437,6 +442,30 @@
return true;
}
+static int trx_ctrl_rx_rsp_setslot(struct trx_l1h *l1h, struct trx_ctrl_rsp *rsp)
+{
+ trx_if_cmd_setslot_cb *cb = (trx_if_cmd_setslot_cb*) rsp->cb;
+ struct phy_instance *pinst = l1h->phy_inst;
+ unsigned int tn, ts_type;
+
+ if (rsp->status)
+ LOGP(DTRX, LOGL_ERROR, "transceiver (%s) SETSLOT failed with status %d\n",
+ phy_instance_name(pinst), rsp->status);
+
+ /* Since message was already validated against CMD we sent, we know format
+ * of params is: "<TN> <TS_TYPE>" */
+ if (sscanf(rsp->params, "%u %u", &tn, &ts_type) < 2) {
+ LOGP(DTRX, LOGL_ERROR, "transceiver (%s) SETSLOT unable to parse params\n",
+ phy_instance_name(pinst));
+ return -EINVAL;
+ }
+
+ if (cb)
+ cb(l1h, tn, ts_type, rsp->status);
+
+ return rsp->status == 0 ? 0 : -EINVAL;
+}
+
/* -EINVAL: unrecoverable error, exit BTS
* N > 0: try sending originating command again after N seconds
* 0: Done with response, get originating command out from send queue
@@ -459,6 +488,8 @@
phy_link_state_set(pinst->phy_link, PHY_LINK_SHUTDOWN);
return 5;
}
+ } else if (strcmp(rsp->cmd, "SETSLOT") == 0) {
+ return trx_ctrl_rx_rsp_setslot(l1h, rsp);
}
if (rsp->status) {
@@ -526,6 +557,8 @@
goto rsp_error;
}
+ rsp.cb = tcm->cb;
+
/* check for response code */
rc = trx_ctrl_rx_rsp(l1h, &rsp, tcm->critical);
if (rc == -EINVAL)
diff --git a/src/osmo-bts-trx/trx_if.h b/src/osmo-bts-trx/trx_if.h
index 206f5e5..cdfbd41 100644
--- a/src/osmo-bts-trx/trx_if.h
+++ b/src/osmo-bts-trx/trx_if.h
@@ -12,8 +12,11 @@
int cmd_len;
int params_len;
int critical;
+ void *cb;
};
+typedef void trx_if_cmd_setslot_cb(struct trx_l1h *l1h, uint8_t tn, uint8_t type, int rc);
+
void trx_if_init(struct trx_l1h *l1h);
int trx_if_cmd_poweroff(struct trx_l1h *l1h);
int trx_if_cmd_poweron(struct trx_l1h *l1h);
@@ -23,7 +26,7 @@
int trx_if_cmd_setpower(struct trx_l1h *l1h, int db);
int trx_if_cmd_setmaxdly(struct trx_l1h *l1h, int dly);
int trx_if_cmd_setmaxdlynb(struct trx_l1h *l1h, int dly);
-int trx_if_cmd_setslot(struct trx_l1h *l1h, uint8_t tn, uint8_t type);
+int trx_if_cmd_setslot(struct trx_l1h *l1h, uint8_t tn, uint8_t type, trx_if_cmd_setslot_cb *cb);
int trx_if_cmd_rxtune(struct trx_l1h *l1h, uint16_t arfcn);
int trx_if_cmd_txtune(struct trx_l1h *l1h, uint16_t arfcn);
int trx_if_cmd_handover(struct trx_l1h *l1h, uint8_t tn, uint8_t ss);
--
To view, visit https://gerrit.osmocom.org/11932
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-MessageType: merged
Gerrit-Change-Id: I888de761b65c3ea8bfe623fcf009f3b2b57c926c
Gerrit-Change-Number: 11932
Gerrit-PatchSet: 6
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder (1000002)
Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: Pau Espin Pedrol <pespin at sysmocom.de>
Gerrit-Reviewer: Vadim Yanitskiy <axilirator at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181204/d3896ec2/attachment.htm>