This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
osmith gerrit-no-reply at lists.osmocom.orgosmith has uploaded this change for review. ( https://gerrit.osmocom.org/12067
Change subject: Add VTY reference for osmo-sip-connector
......................................................................
Add VTY reference for osmo-sip-connector
Ticket: OS#1684
Change-Id: I1045c20dd7234d425836ba93fa292a35ccddc7fd
---
A doc/manuals/Makefile
A doc/manuals/osmosipconnector-vty-reference.xml
A doc/manuals/vty/sipconn_vty_additions.xml
A doc/manuals/vty/sipconn_vty_reference.xml
4 files changed, 1,086 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-sip-connector refs/changes/67/12067/1
diff --git a/doc/manuals/Makefile b/doc/manuals/Makefile
new file mode 100644
index 0000000..5a47759
--- /dev/null
+++ b/doc/manuals/Makefile
@@ -0,0 +1,6 @@
+TOPDIR = ..
+
+VTY_REFERENCE = osmosipconnector-vty-reference.xml
+include $(TOPDIR)/build/Makefile.vty-reference.inc
+
+include $(TOPDIR)/build/Makefile.common.inc
diff --git a/doc/manuals/osmosipconnector-vty-reference.xml b/doc/manuals/osmosipconnector-vty-reference.xml
new file mode 100644
index 0000000..fe22a99
--- /dev/null
+++ b/doc/manuals/osmosipconnector-vty-reference.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+ ex:ts=2:sw=42sts=2:et
+ -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
+-->
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML 5.0//EN"
+"http://docbook.org/xml/5.0/dtd/docbook.dtd" [
+<!ENTITY chapter-vty SYSTEM "../common/chapters/vty.xml" >
+<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" >
+]>
+
+<book>
+ <info>
+ <revhistory>
+ <revision>
+ <revnumber>v1</revnumber>
+ <date>21st August 2018</date>
+ <authorinitials>dw</authorinitials>
+ <revremark>Initial</revremark>
+ </revision>
+ </revhistory>
+
+ <title>OsmoSIPConnector VTY Reference</title>
+
+ <copyright>
+ <year>2018</year>
+ </copyright>
+
+ <legalnotice>
+ <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved.
+ </para>
+ </legalnotice>
+ </info>
+
+ <!-- Main chapters-->
+ &chapter-vty;
+</book>
+
diff --git a/doc/manuals/vty/sipconn_vty_additions.xml b/doc/manuals/vty/sipconn_vty_additions.xml
new file mode 100644
index 0000000..a4c675e
--- /dev/null
+++ b/doc/manuals/vty/sipconn_vty_additions.xml
@@ -0,0 +1,2 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+</vtydoc>
diff --git a/doc/manuals/vty/sipconn_vty_reference.xml b/doc/manuals/vty/sipconn_vty_reference.xml
new file mode 100644
index 0000000..35aad6b
--- /dev/null
+++ b/doc/manuals/vty/sipconn_vty_reference.xml
@@ -0,0 +1,1040 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+ <node id='_common_cmds_'>
+ <name>Common Commands</name>
+ <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ </node>
+ <node id='view'>
+ <name>view</name>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='enable'>
+ <params>
+ <param name='enable' doc='Turn on privileged mode command' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='show calls'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='calls' doc='Current calls' />
+ </params>
+ </command>
+ <command id='show calls summary'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='calls' doc='Current calls' />
+ <param name='summary' doc='Brief overview' />
+ </params>
+ </command>
+ <command id='show mncc-connection'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mncc-connection' doc='MNCC Connection state' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging print extended-timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='extended-timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
+ </params>
+ </command>
+ <command id='logging print category (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='category' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with category/subsystem name' />
+ </params>
+ </command>
+ <command id='logging print category-hex (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='category-hex' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
+ </params>
+ </command>
+ <command id='logging print level (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='level' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with the log level name' />
+ </params>
+ </command>
+ <command id='logging print file (0|1|basename)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='file' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with the source file and line' />
+ <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
+ </params>
+ </command>
+ <command id='logging level (all|sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='sip' doc='SIP interface' />
+ <param name='mncc' doc='MNCC interface' />
+ <param name='app' doc='Application interface' />
+ <param name='call' doc='Call management' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='lctrl' doc='Control Interface' />
+ <param name='lgtp' doc='GPRS GTP library' />
+ <param name='lstats' doc='Statistics messages and logging' />
+ <param name='lgsup' doc='Generic Subscriber Update Protocol' />
+ <param name='loap' doc='Osmocom Authentication Protocol' />
+ <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
+ <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
+ <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
+ <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
+ <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
+ <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='everything' doc='Don't use. It doesn't log anything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ </params>
+ </command>
+ <command id='show stats level (global|peer|subscriber)'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ <param name='level' doc='Set the maximum group level' />
+ <param name='global' doc='Show global groups only' />
+ <param name='peer' doc='Show global and network peer related groups' />
+ <param name='subscriber' doc='Show global, peer, and subscriber groups' />
+ </params>
+ </command>
+ <command id='show asciidoc counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='asciidoc' doc='Asciidoc generation' />
+ <param name='counters' doc='Generate table of all registered counters' />
+ </params>
+ </command>
+ <command id='show rate-counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='rate-counters' doc='Show all rate counters' />
+ </params>
+ </command>
+ </node>
+ <node id='enable'>
+ <name>enable</name>
+ <command id='disable'>
+ <params>
+ <param name='disable' doc='Turn off privileged mode command' />
+ </params>
+ </command>
+ <command id='configure terminal'>
+ <params>
+ <param name='configure' doc='Configuration from vty interface' />
+ <param name='terminal' doc='Configuration terminal' />
+ </params>
+ </command>
+ <command id='copy running-config startup-config'>
+ <params>
+ <param name='copy' doc='Copy configuration' />
+ <param name='running-config' doc='Copy running config to... ' />
+ <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
+ </params>
+ </command>
+ <command id='show startup-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='startup-config' doc='Contentes of startup configuration' />
+ </params>
+ </command>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='terminal monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='terminal no monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='show calls'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='calls' doc='Current calls' />
+ </params>
+ </command>
+ <command id='show calls summary'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='calls' doc='Current calls' />
+ <param name='summary' doc='Brief overview' />
+ </params>
+ </command>
+ <command id='show mncc-connection'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mncc-connection' doc='MNCC Connection state' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging print extended-timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='extended-timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
+ </params>
+ </command>
+ <command id='logging print category (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='category' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with category/subsystem name' />
+ </params>
+ </command>
+ <command id='logging print category-hex (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='category-hex' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
+ </params>
+ </command>
+ <command id='logging print level (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='level' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with the log level name' />
+ </params>
+ </command>
+ <command id='logging print file (0|1|basename)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='file' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with the source file and line' />
+ <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='List of logging categories to log, e.g. 'abc:mno:xyz'. Available log categories depend on the specific application, refer to the 'logging level' command. Optionally add individual log levels like 'abc,1:mno,3:xyz,5', where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
+ </params>
+ </command>
+ <command id='logging level (all|sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='sip' doc='SIP interface' />
+ <param name='mncc' doc='MNCC interface' />
+ <param name='app' doc='Application interface' />
+ <param name='call' doc='Call management' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='lctrl' doc='Control Interface' />
+ <param name='lgtp' doc='GPRS GTP library' />
+ <param name='lstats' doc='Statistics messages and logging' />
+ <param name='lgsup' doc='Generic Subscriber Update Protocol' />
+ <param name='loap' doc='Osmocom Authentication Protocol' />
+ <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
+ <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
+ <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
+ <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
+ <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
+ <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='everything' doc='Don't use. It doesn't log anything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ </params>
+ </command>
+ <command id='show stats level (global|peer|subscriber)'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='stats' doc='Show statistical values' />
+ <param name='level' doc='Set the maximum group level' />
+ <param name='global' doc='Show global groups only' />
+ <param name='peer' doc='Show global and network peer related groups' />
+ <param name='subscriber' doc='Show global, peer, and subscriber groups' />
+ </params>
+ </command>
+ <command id='show asciidoc counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='asciidoc' doc='Asciidoc generation' />
+ <param name='counters' doc='Generate table of all registered counters' />
+ </params>
+ </command>
+ <command id='show rate-counters'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='rate-counters' doc='Show all rate counters' />
+ </params>
+ </command>
+ </node>
+ <node id='config'>
+ <name>config</name>
+ <command id='hostname WORD'>
+ <params>
+ <param name='hostname' doc='Set system's network name' />
+ <param name='WORD' doc='This system's network name' />
+ </params>
+ </command>
+ <command id='no hostname [HOSTNAME]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='hostname' doc='Reset system's network name' />
+ <param name='[HOSTNAME]' doc='Host name of this router' />
+ </params>
+ </command>
+ <command id='password (8|) WORD'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN line password string' />
+ </params>
+ </command>
+ <command id='password LINE'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
+ </params>
+ </command>
+ <command id='enable password (8|) WORD'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN 'enable' password string' />
+ </params>
+ </command>
+ <command id='enable password LINE'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
+ </params>
+ </command>
+ <command id='no enable password'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ </params>
+ </command>
+ <command id='banner motd default'>
+ <params>
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ <param name='default' doc='Default string' />
+ </params>
+ </command>
+ <command id='banner motd file [FILE]'>
+ <params>
+ <param name='banner' doc='Set banner' />
+ <param name='motd' doc='Banner for motd' />
+ <param name='file' doc='Banner from a file' />
+ <param name='[FILE]' doc='Filename' />
+ </params>
+ </command>
+ <command id='no banner motd'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ </params>
+ </command>
+ <command id='service terminal-length <0-512>'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='no service terminal-length [<0-512>]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='line vty'>
+ <params>
+ <param name='line' doc='Configure a terminal line' />
+ <param name='vty' doc='Virtual terminal' />
+ </params>
+ </command>
+ <command id='service advanced-vty'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='no service advanced-vty'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='sip'>
+ <params>
+ <param name='sip' doc='SIP related commands' />
+ </params>
+ </command>
+ <command id='mncc'>
+ <params>
+ <param name='mncc' doc='MNCC' />
+ </params>
+ </command>
+ <command id='app'>
+ <params>
+ <param name='app' doc='Application Handling' />
+ </params>
+ </command>
+ <command id='log stderr'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='no log stderr'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='log file .FILENAME'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='no log file .FILENAME'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='log alarms <2-32700>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ <param name='<2-32700>' doc='Maximum number of messages to log' />
+ </params>
+ </command>
+ <command id='no log alarms'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ </params>
+ </command>
+ <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='authpriv' doc='Security/authorization messages facility' />
+ <param name='cron' doc='Clock daemon (cron/at) facility' />
+ <param name='daemon' doc='General system daemon facility' />
+ <param name='ftp' doc='Ftp daemon facility' />
+ <param name='lpr' doc='Line printer facility' />
+ <param name='mail' doc='Mail facility' />
+ <param name='news' doc='News facility' />
+ <param name='user' doc='Generic facility' />
+ <param name='uucp' doc='UUCP facility' />
+ </params>
+ </command>
+ <command id='log syslog local <0-7>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='local' doc='Syslog LOCAL facility' />
+ <param name='<0-7>' doc='Local facility number' />
+ </params>
+ </command>
+ <command id='no log syslog'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ </params>
+ </command>
+ <command id='log gsmtap [HOSTNAME]'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='gsmtap' doc='Logging via GSMTAP' />
+ <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
+ </params>
+ </command>
+ <command id='stats reporter statsd'>
+ <params>
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='statsd' doc='Report to a STATSD server' />
+ </params>
+ </command>
+ <command id='no stats reporter statsd'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='statsd' doc='Report to a STATSD server' />
+ </params>
+ </command>
+ <command id='stats reporter log'>
+ <params>
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='log' doc='Report to the logger' />
+ </params>
+ </command>
+ <command id='no stats reporter log'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='reporter' doc='Configure a stats reporter' />
+ <param name='log' doc='Report to the logger' />
+ </params>
+ </command>
+ <command id='stats interval <1-65535>'>
+ <params>
+ <param name='stats' doc='Configure stats sub-system' />
+ <param name='interval' doc='Set the reporting interval' />
+ <param name='<1-65535>' doc='Interval in seconds' />
+ </params>
+ </command>
+ </node>
+ <node id='config-log'>
+ <name>config-log</name>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging print extended-timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='extended-timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
+ </params>
+ </command>
+ <command id='logging print category (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='category' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with category/subsystem name' />
+ </params>
+ </command>
+ <command id='logging print category-hex (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='category-hex' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with category/subsystem nr in hex ('<000b>')' />
+ </params>
+ </command>
+ <command id='logging print level (0|1)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='level' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with the log level name' />
+ </params>
+ </command>
+ <command id='logging print file (0|1|basename)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='print' doc='Log output settings' />
+ <param name='file' doc='Configure log message' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with the source file and line' />
+ <param name='basename' doc='Prefix each log message with the source file's basename (strip leading paths) and line' />
+ </params>
+ </command>
+ <command id='logging level (all|sip|mncc|app|call|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure logging' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='sip' doc='SIP interface' />
+ <param name='mncc' doc='MNCC interface' />
+ <param name='app' doc='Application interface' />
+ <param name='call' doc='Call management' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='lctrl' doc='Control Interface' />
+ <param name='lgtp' doc='GPRS GTP library' />
+ <param name='lstats' doc='Statistics messages and logging' />
+ <param name='lgsup' doc='Generic Subscriber Update Protocol' />
+ <param name='loap' doc='Osmocom Authentication Protocol' />
+ <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
+ <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
+ <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
+ <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
+ <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
+ <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
+ <param name='everything' doc='Don't use. It doesn't log anything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticeable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ </node>
+ <node id='config-stats'>
+ <name>config-stats</name>
+ <command id='local-ip ADDR'>
+ <params>
+ <param name='local-ip' doc='Set the IP address to which we bind locally' />
+ <param name='ADDR' doc='IP Address' />
+ </params>
+ </command>
+ <command id='no local-ip'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='local-ip' doc='Set the IP address to which we bind locally' />
+ </params>
+ </command>
+ <command id='remote-ip ADDR'>
+ <params>
+ <param name='remote-ip' doc='Set the remote IP address to which we connect' />
+ <param name='ADDR' doc='IP Address' />
+ </params>
+ </command>
+ <command id='remote-port <1-65535>'>
+ <params>
+ <param name='remote-port' doc='Set the remote port to which we connect' />
+ <param name='<1-65535>' doc='Remote port number' />
+ </params>
+ </command>
+ <command id='mtu <100-65535>'>
+ <params>
+ <param name='mtu' doc='Set the maximum packet size' />
+ <param name='<100-65535>' doc='Size in byte' />
+ </params>
+ </command>
+ <command id='no mtu'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='mtu' doc='Set the maximum packet size' />
+ </params>
+ </command>
+ <command id='prefix PREFIX'>
+ <params>
+ <param name='prefix' doc='Set the item name prefix' />
+ <param name='PREFIX' doc='The prefix string' />
+ </params>
+ </command>
+ <command id='no prefix'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='prefix' doc='Set the item name prefix' />
+ </params>
+ </command>
+ <command id='level (global|peer|subscriber)'>
+ <params>
+ <param name='level' doc='Set the maximum group level' />
+ <param name='global' doc='Report global groups only' />
+ <param name='peer' doc='Report global and network peer related groups' />
+ <param name='subscriber' doc='Report global, peer, and subscriber groups' />
+ </params>
+ </command>
+ <command id='enable'>
+ <params>
+ <param name='enable' doc='Enable the reporter' />
+ </params>
+ </command>
+ <command id='disable'>
+ <params>
+ <param name='disable' doc='Disable the reporter' />
+ </params>
+ </command>
+ </node>
+ <node id='config-line'>
+ <name>config-line</name>
+ <command id='login'>
+ <params>
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ <command id='no login'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ <command id='bind A.B.C.D'>
+ <params>
+ <param name='bind' doc='Accept VTY telnet connections on local interface' />
+ <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
+ </params>
+ </command>
+ </node>
+ <node id='config-sip'>
+ <name>config-sip</name>
+ <command id='local A.B.C.D <1-65534>'>
+ <params>
+ <param name='local' doc='Local information' />
+ <param name='A.B.C.D' doc='IPv4 bind address' />
+ <param name='<1-65534>' doc='port' />
+ </params>
+ </command>
+ <command id='remote ADDR <1-65534>'>
+ <params>
+ <param name='remote' doc='Remore information' />
+ <param name='ADDR' doc='SIP hostname' />
+ <param name='<1-65534>' doc='port' />
+ </params>
+ </command>
+ <command id='sofia-sip log-level <0-9>'>
+ <params>
+ <param name='sofia-sip' doc='sofia-sip library configuration' />
+ <param name='log-level' doc='global log-level for sofia-sip' />
+ <param name='<0-9>' doc='(0 = nothing, 9 = super-verbose)' />
+ </params>
+ </command>
+ </node>
+ <node id='config-mncc'>
+ <name>config-mncc</name>
+ <command id='socket-path NAME'>
+ <params>
+ <param name='socket-path' doc='MNCC filepath' />
+ <param name='NAME' doc='Filename' />
+ </params>
+ </command>
+ </node>
+ <node id='config-app'>
+ <name>config-app</name>
+ <command id='use-imsi'>
+ <params>
+ <param name='use-imsi' doc='Use the IMSI for MO calling and MT called address' />
+ </params>
+ </command>
+ <command id='no use-imsi'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='use-imsi' doc='Use the IMSI for MO calling and MT called address' />
+ </params>
+ </command>
+ </node>
+</vtydoc>
--
To view, visit https://gerrit.osmocom.org/12067
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-sip-connector
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I1045c20dd7234d425836ba93fa292a35ccddc7fd
Gerrit-Change-Number: 12067
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith at sysmocom.de>
Gerrit-Reviewer: daniel <dwillmann at sysmocom.de>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20181203/ba4ccddd/attachment.htm>