This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. ( https://gerrit.osmocom.org/10477 ) Change subject: gbproxy: Add VTY parameter: link stored-msgs-max-length ...................................................................... gbproxy: Add VTY parameter: link stored-msgs-max-length It was discovered in some prod setups that some TLLIs can maintain quite long queues of msgb in case its IMSI is not acquired and the tlli is not pruned due to link-list max-{age,length} being set to 0. As a result, the osmo-gpbroxy steadly increases the list size of maintained TLLIs, and some TLLI was found without IMSI catching already 1211 msgb. Let's allow setting a maxiumum length for the queue storing those msgb in a per TLLI base. If the limit is reached, oldest msgb are removed before adding a new one. Depends: libosmocore Change-Id I33b501e89a8f29e4aa121696bcbb13d4b83db40f Related: SYS#4297 Change-Id: I4473be8604f80302df03ffdd5a13280dc072f824 --- M include/osmocom/sgsn/gb_proxy.h M src/gprs/gb_proxy.c M src/gprs/gb_proxy_vty.c 3 files changed, 59 insertions(+), 8 deletions(-) Approvals: Harald Welte: Looks good to me, approved Jenkins Builder: Verified diff --git a/include/osmocom/sgsn/gb_proxy.h b/include/osmocom/sgsn/gb_proxy.h index 70de3d7..16082fc 100644 --- a/include/osmocom/sgsn/gb_proxy.h +++ b/include/osmocom/sgsn/gb_proxy.h @@ -105,8 +105,12 @@ struct osmo_plmn_id core_plmn; uint8_t* core_apn; size_t core_apn_size; + /* If !0, Max age to consider a struct gbproxy_link_info as stale */ int tlli_max_age; + /* If !0, Max len of gbproxy_peer->list (list of struct gbproxy_link_info) */ int tlli_max_len; + /* If !0, Max len of gbproxy_link_info->stored_msgs (list of msgb) */ + uint32_t stored_msgs_max_len; /* Experimental config */ int patch_ptmsi; @@ -171,6 +175,7 @@ int imsi_acq_pending; struct llist_head stored_msgs; + uint32_t stored_msgs_len; unsigned vu_gen_tx_bss; int is_deregistered; diff --git a/src/gprs/gb_proxy.c b/src/gprs/gb_proxy.c index f834ed3..8bb6789 100644 --- a/src/gprs/gb_proxy.c +++ b/src/gprs/gb_proxy.c @@ -338,7 +338,8 @@ msgb_nsei(msg)); /* Patch and flush stored messages towards the SGSN */ - while ((stored_msg = msgb_dequeue(&link_info->stored_msgs))) { + while ((stored_msg = msgb_dequeue_count(&link_info->stored_msgs, + &link_info->stored_msgs_len))) { struct gprs_gb_parse_context tmp_parse_ctx = {0}; tmp_parse_ctx.to_bss = 0; tmp_parse_ctx.peer_nsei = msgb_nsei(stored_msg); @@ -492,6 +493,24 @@ /* The message cannot be processed since the IMSI is still missing */ + /* If queue is getting too large, drop oldest msgb before adding new one */ + if (peer->cfg->stored_msgs_max_len > 0) { + int exceeded_max_len = link_info->stored_msgs_len + + 1 - peer->cfg->stored_msgs_max_len; + + for (; exceeded_max_len > 0; exceeded_max_len--) { + struct msgb *msgb_drop; + msgb_drop = msgb_dequeue_count(&link_info->stored_msgs, + &link_info->stored_msgs_len); + LOGP(DLLC, LOGL_INFO, + "NSEI=%d(BSS) Dropping stored msgb from list " + "(!acq imsi, length %d, max_len exceeded)\n", + msgb_nsei(msgb_drop), link_info->stored_msgs_len); + + msgb_free(msgb_drop); + } + } + /* Enqueue unpatched messages */ LOGP(DLLC, LOGL_INFO, "NSEI=%d(BSS) IMSI acquisition in progress, " @@ -500,7 +519,8 @@ parse_ctx->llc_msg_name ? parse_ctx->llc_msg_name : "BSSGP"); stored_msg = bssgp_msgb_copy(msg, "process_bssgp_ul"); - msgb_enqueue(&link_info->stored_msgs, stored_msg); + msgb_enqueue_count(&link_info->stored_msgs, stored_msg, + &link_info->stored_msgs_len); if (!link_info->imsi_acq_pending) { LOGP(DLLC, LOGL_INFO, diff --git a/src/gprs/gb_proxy_vty.c b/src/gprs/gb_proxy_vty.c index cd10abf..d743355 100644 --- a/src/gprs/gb_proxy_vty.c +++ b/src/gprs/gb_proxy_vty.c @@ -23,6 +23,7 @@ #include <arpa/inet.h> #include <string.h> #include <time.h> +#include <inttypes.h> #include <osmocom/core/talloc.h> #include <osmocom/core/rate_ctr.h> @@ -128,6 +129,9 @@ vty_out(vty, " link-list keep-mode %s%s", get_value_string(keep_modes, g_cfg->keep_link_infos), VTY_NEWLINE); + if (g_cfg->stored_msgs_max_len > 0) + vty_out(vty, " link stored-msgs-max-length %"PRIu32"%s", + g_cfg->stored_msgs_max_len, VTY_NEWLINE); return CMD_SUCCESS; @@ -402,6 +406,7 @@ } #define GBPROXY_LINK_LIST_STR "Set TLLI list parameters\n" +#define GBPROXY_LINK_STR "Set TLLI parameters\n" #define GBPROXY_MAX_AGE_STR "Limit maximum age\n" DEFUN(cfg_gbproxy_link_list_max_age, @@ -464,6 +469,27 @@ return CMD_SUCCESS; } +DEFUN(cfg_gbproxy_link_stored_msgs_max_len, + cfg_gbproxy_link_stored_msgs_max_len_cmd, + "link stored-msgs-max-length <1-99999>", + GBPROXY_LINK_STR GBPROXY_MAX_LEN_STR + "Maximum number of msgb stored in the logical link waiting to acquire its IMSI\n") +{ + g_cfg->stored_msgs_max_len = (uint32_t) atoi(argv[0]); + + return CMD_SUCCESS; +} + +DEFUN(cfg_gbproxy_link_no_stored_msgs_max_len, + cfg_gbproxy_link_no_stored_msgs_max_len_cmd, + "no link stored-msgs-max-length", + NO_STR GBPROXY_LINK_STR GBPROXY_MAX_LEN_STR) +{ + g_cfg->stored_msgs_max_len = 0; + + return CMD_SUCCESS; +} + DEFUN(show_gbproxy, show_gbproxy_cmd, "show gbproxy [stats]", SHOW_STR "Display information about the Gb proxy\n" "Show statistics\n") @@ -502,10 +528,6 @@ llist_for_each_entry(link_info, &state->logical_links, list) { time_t age = now - link_info->timestamp; - int stored_msgs = 0; - struct llist_head *iter; - llist_for_each(iter, &link_info->stored_msgs) - stored_msgs++; if (link_info->imsi > 0) { snprintf(mi_buf, sizeof(mi_buf), "(invalid)"); @@ -518,8 +540,10 @@ vty_out(vty, " TLLI %08x, IMSI %s, AGE %d", link_info->tlli.current, mi_buf, (int)age); - if (stored_msgs) - vty_out(vty, ", STORED %d", stored_msgs); + if (link_info->stored_msgs_len) + vty_out(vty, ", STORED %"PRIu32"/%"PRIu32, + link_info->stored_msgs_len, + g_cfg->stored_msgs_max_len); if (g_cfg->route_to_sgsn2) vty_out(vty, ", SGSN NSEI %d", @@ -825,6 +849,7 @@ install_element(GBPROXY_NODE, &cfg_gbproxy_link_list_max_age_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_link_list_max_len_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_link_list_keep_mode_cmd); + install_element(GBPROXY_NODE, &cfg_gbproxy_link_stored_msgs_max_len_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_no_core_mcc_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_no_core_mnc_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_no_match_imsi_cmd); @@ -834,6 +859,7 @@ install_element(GBPROXY_NODE, &cfg_gbproxy_no_acquire_imsi_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_link_list_no_max_age_cmd); install_element(GBPROXY_NODE, &cfg_gbproxy_link_list_no_max_len_cmd); + install_element(GBPROXY_NODE, &cfg_gbproxy_link_no_stored_msgs_max_len_cmd); /* broken or deprecated to allow an upgrade path */ install_element(GBPROXY_NODE, &cfg_gbproxy_broken_apn_match_cmd); -- To view, visit https://gerrit.osmocom.org/10477 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-sgsn Gerrit-Branch: master Gerrit-MessageType: merged Gerrit-Change-Id: I4473be8604f80302df03ffdd5a13280dc072f824 Gerrit-Change-Number: 10477 Gerrit-PatchSet: 4 Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: Stefan Sperling <ssperling at sysmocom.de> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osmocom.org/pipermail/gerrit-log/attachments/20180817/bcda7db7/attachment.htm>