This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
André Boddenberg gerrit-no-reply at lists.osmocom.orgGerrit verification jobs as Jenkins Job Builder YAML [1] file. [1] https://docs.openstack.org/infra/jenkins-job-builder/ Change-Id: I04387367a6e2d737bfb50423c81a8908d3c2a89f --- A jobs/gerrit-verifications.yml 1 file changed, 273 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ci refs/changes/11/3911/2 diff --git a/jobs/gerrit-verifications.yml b/jobs/gerrit-verifications.yml new file mode 100644 index 0000000..b079201 --- /dev/null +++ b/jobs/gerrit-verifications.yml @@ -0,0 +1,273 @@ +- project: + name: gerrit + # following default values can be overridden by each repo + disabled: false + concurrent: false + node: linux_amd64_debian8 + # axes related defaults + slave_axis: !!python/tuple [linux_amd64_debian8] + a1_name: a1 + a1: !!python/tuple [default] + a2_name: a2 + a2: !!python/tuple [default] + a3_name: a3 + a3: !!python/tuple [default] + a4_name: a4 + a4: !!python/tuple [default] + combination_filter: '' + # most common build invocation is default + cmd: ./contrib/jenkins.sh + + repos: + # no drafts verified? + - osmo-iuh + + - osmo-gsm-manuals + + # no 'clean state'? + - osmo-sip-connector + + # touchstone config without filter? + - osmocom-bb + + # no drafts verified? + - osmo-hlr: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - osmo-trx: + slave_axis: !!python/tuple [OsmocomBuild1] + + # no gcc warnings at all? + - osmo-ggsn: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - osmo-pcap: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - libsmpp34: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - openggsn: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + # drafts not verified + - libosmo-sccp: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - libosmo-netif: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - libosmo-abis: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + # no drafts are checked? + - libasn1c: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + + - cellmgr-ng: + concurrent: true + cmd: 'docker run --rm=true -e HOME=/build -e MAKE=make -e PARALLEL_MAKE="$PARALLEL_MAKE" -e IU="$IU" -e SMPP="$SMPP" -e MGCP="$MGCP" -w /build -i -u build -v $PWD:/build osmocom:amd64 /build/contrib/jenkins.sh' + + - osmo-bsc: + cmd: 'docker run --rm=true -e HOME=/build -e MAKE=make -e PARALLEL_MAKE="$PARALLEL_MAKE" -e PATH="$PATH:/build_bin" -e OSMOPY_DEBUG_TCP_SOCKETS="1" -w /build -i -u build -v "$PWD:/build" -v "$HOME/bin:/build_bin" osmocom:amd64 /build/contrib/jenkins.sh' + + # no gcc warnings? + - osmo-gsm-tester: + slave_axis: !!python/tuple [OsmocomBuild1] + cmd: 'make deps; make check' + + - osmo-bts: + a1_name: FIRMWARE_VERSION + a1: !!python/tuple [master, femtobts_v2.7, superfemto_v2.4, superfemto_v3.0.1pre, superfemto_v3.1, superfemto_v5.1, v2017.01, origin/nrw/litecell15-next] + a2_name: BTS_MODEL + a2: !!python/tuple [sysmo, oct, trx, oct+trx, lc15] + combination_filter: '(BTS_MODEL == "sysmo" && FIRMWARE_VERSION=="master") || (BTS_MODEL == "oct" && FIRMWARE_VERSION=="master") || (BTS_MODEL == "trx" && FIRMWARE_VERSION=="master") || (BTS_MODEL == "oct+trx" && FIRMWARE_VERSION=="master") || (BTS_MODEL == "lc15" && FIRMWARE_VERSION=="master") || (BTS_MODEL == "sysmo" && FIRMWARE_VERSION=="femtobts_v2.7") || (BTS_MODEL == "sysmo" && FIRMWARE_VERSION=="superfemto_v2.4") || (BTS_MODEL == "sysmo" && FIRMWARE_VERSION=="superfemto_v3.0.1pre") || (BTS_MODEL == "sysmo" && FIRMWARE_VERSION=="superfemto_v3.1") || (BTS_MODEL == "sysmo" && FIRMWARE_VERSION=="superfemto_v5.1") || (BTS_MODEL == "lc15" && FIRMWARE_VERSION=="v2017.01") || (BTS_MODEL == "lc15" && FIRMWARE_VERSION=="origin/nrw/litecell15-next")' + cmd: './contrib/jenkins_bts_model.sh "$BTS_MODEL"' + + # no gcc warnings at all? + - openBSC: + a1_name: SMPP + a1: !!python/tuple [--enable-smpp] + a2_name: MGCP + a2: !!python/tuple [--enable-mgcp-transcoding, --disable-mgcp-transcoding] + a3_name: IU + a3: !!python/tuple [--disable-iu] + cmd: > + ARTIFACT_STORE="$HOME/jenkins_build_artifact_store" + mkdir -p "$ARTIFACT_STORE" + + docker run --rm=true \ + -e HOME=/build \ + -e ARTIFACT_STORE=/artifact_store \ + -e JOB_NAME="$JOB_NAME" \ + -e MAKE=make \ + -e PARALLEL_MAKE="$PARALLEL_MAKE" \ + -e IU="$IU" \ + -e SMPP="$SMPP" \ + -e MGCP="$MGCP" \ + -e PATH="$PATH:/build_bin" \ + -e OSMOPY_DEBUG_TCP_SOCKETS="1" \ + -w /build -i -u build \ + -v "$PWD:/build" \ + -v "$HOME/bin:/build_bin" \ + -v "$ARTIFACT_STORE:/artifact_store" \ + osmocom:amd64 /build/contrib/jenkins.sh + + - libosmocore: + slave_axis: !!python/tuple [linux_amd64_debian8, FreeBSD_amd64] + a1_name: arch + a1: !!python/tuple [arm-none-eabi, amd64] + combination_filter: '!(arch=="arm-none-eabi" && label=="FreeBSD_amd64")' + cmd: > + if [[ "$JOB_NAME" == *"arch=arm-none-eabi,label=linux_amd64_debian8"* ]]; then + ./contrib/jenkins-arm.sh + else + ./contrib/jenkins.sh + fi + + - osmo-mgw: + a1_name: MGCP + a1: !!python/tuple [--enable-mgcp-transcoding, --disable-mgcp-transcoding] + cmd: 'docker run --rm=true -e HOME=/build -e MAKE=make -e PARALLEL_MAKE="$PARALLEL_MAKE" -e MGCP="$MGCP" -e PATH="$PATH:/build_bin" -e OSMOPY_DEBUG_TCP_SOCKETS="1" -w /build -i -u build -v "$PWD:/build" -v "$HOME/bin:/build_bin" osmocom:amd64 /build/contrib/jenkins.sh' + + - osmo-msc: + a1_name: IU + a1: !!python/tuple [--enable-iu, --disable-iu] + cmd: > + ARTIFACT_STORE="$HOME/jenkins_build_artifact_store" + mkdir -p "$ARTIFACT_STORE" + + docker run --rm=true -i \ + -e HOME=/build \ + -e ARTIFACT_STORE=/artifact_store \ + -e JOB_NAME="$JOB_NAME" \ + -e MAKE=make \ + -e PARALLEL_MAKE="$PARALLEL_MAKE" \ + -e IU="$IU" \ + -e PATH="$PATH:/build_bin" \ + -e OSMOPY_DEBUG_TCP_SOCKETS="1" \ + -w /build \ + -u build \ + -v "$PWD:/build" \ + -v "$HOME/bin:/build_bin" \ + osmocom:amd64 /build/contrib/jenkins.sh + + - osmo-pcu: + a1_name: FIRMWARE_VERSION + a1: !!python/tuple [master, v2017.01, origin/nrw/litecell15-next] + a2_name: with_vty + a2: !!python/tuple [yes ,no] + a3_name: with_dsp + a3: !!python/tuple [sysmo, lc15, none] + combination_filter: (with_vty == "yes" && with_dsp == "sysmo" && FIRMWARE_VERSION=="master") || (with_vty == "yes" && with_dsp == "lc15" && FIRMWARE_VERSION=="master") || (with_vty == "yes" && with_dsp == "lc15" && FIRMWARE_VERSION=="v2017.01") || (with_vty == "yes" && with_dsp == "lc15" && FIRMWARE_VERSION=="origin/nrw/litecell15-next") || (with_vty == "no" && with_dsp == "none" && FIRMWARE_VERSION=="master") + + - osmo-sgsn: + concurrent: true + a1_name: IU + a1: !!python/tuple [--enable-iu, --disable-iu] + cmd: > + docker run --rm=true -e HOME=/build -e MAKE=make -e PARALLEL_MAKE="$PARALLEL_MAKE" \ + -e IU="$IU" -e PATH="$PATH:/build_bin" -e OSMOPY_DEBUG_TCP_SOCKETS="1" -w /build \ + -i -u build -v "$PWD:/build" -v "$HOME/bin:/build_bin" osmocom:amd64 \ + /build/contrib/jenkins.sh + + # no ./contrib/jenkins.sh script might worth putting it in repo? + - osmo-tetra: + cmd: > + rm -rf deps/install + mkdir deps || true + cd deps + osmo-deps.sh libosmocore + + cd libosmocore + autoreconf --install --force + ./configure --prefix=$PWD/../install + $MAKE $PARALLEL_MAKE install + + cd ../../src + make clean || true + PKG_CONFIG_PATH=$PWD/../deps/install/lib/pkgconfig $MAKE + + jobs: + - '{repos}-gerrit' + +- job-template: + name: '{repos}-gerrit' + project-type: matrix + node: '{node}' + concurrent: '{obj:concurrent}' + disabled: '{obj:disabled}' + retry-count: 3 # scm checkout + build-discarder: + daysToKeep: 30 + numToKeep: 120 + artifactDaysToKeep: -1 + artifactNumToKeep: -1 + description: 'Pending reviews: https://gerrit.osmocom.org/#/q/status:open+project:{repos} ' + execution-strategy: + combination-filter: | + {obj:combination_filter} + axes: + - axis: + type: slave + name: label + values: '{obj:slave_axis}' + - axis: + type: user-defined + name: '{obj:a1_name}' + values: '{obj:a1}' + - axis: + type: user-defined + name: '{obj:a2_name}' + values: '{obj:a2}' + - axis: + type: user-defined + name: '{obj:a3_name}' + values: '{obj:a3}' + - axis: + type: user-defined + name: '{obj:a4_name}' + values: '{obj:a4}' + + scm: + - git: + url: ssh://jenkins@gerrit.osmocom.org:29418/{repos} + credentials-id: d5eda5e9-b59d-44ba-88d2-43473cb6e42d + branches: + - $GERRIT_BRANCH + choosing-strategy: gerrit + wipe-workspace: false + skip-tag: true + + triggers: + - gerrit: + trigger-on: + - draft-published-event + - patchset-created-event + projects: + - project-compare-type: 'PLAIN' + project-pattern: '{repos}' + branches: + - branch-compare-type: 'ANT' + branch-pattern: '**' + skip-vote: + successful: true + failed: true + unstable: true + notbuilt: true + silent: true # for testing + escape-quotes: false + no-name-and-email: false + trigger-for-unreviewed-patches: true + server-name: gerrit.osmocom.org + + builders: + # ensure clean state + - shell: 'chmod -R +w *; rm -rf *; git checkout .' + - shell: '{obj:cmd}' + + publishers: + - warnings: + console-log-parsers: + - 'GNU C Compiler 4 (gcc)' + resolve-relative-paths: true -- To view, visit https://gerrit.osmocom.org/3911 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newpatchset Gerrit-Change-Id: I04387367a6e2d737bfb50423c81a8908d3c2a89f Gerrit-PatchSet: 2 Gerrit-Project: osmo-ci Gerrit-Branch: master Gerrit-Owner: André Boddenberg <dr.blobb at gmail.com> Gerrit-Reviewer: André Boddenberg <dr.blobb at gmail.com> Gerrit-Reviewer: Max <msuraev at sysmocom.de>