This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged. Change subject: OsmoGGSN: Add VTY reference manual ...................................................................... OsmoGGSN: Add VTY reference manual Change-Id: Iddf6fe26689172d7db001198943c816eaaed7931 --- M OsmoGGSN/Makefile A OsmoGGSN/osmoggsn-vty-reference.xml A OsmoGGSN/vty/ggsn_vty_additions.xml A OsmoGGSN/vty/ggsn_vty_reference.xml 4 files changed, 1,575 insertions(+), 1 deletion(-) Approvals: Harald Welte: Looks good to me, approved Jenkins Builder: Verified diff --git a/OsmoGGSN/Makefile b/OsmoGGSN/Makefile index daf3597..2dfedb2 100644 --- a/OsmoGGSN/Makefile +++ b/OsmoGGSN/Makefile @@ -1,6 +1,18 @@ # XSL stylesheets downloaded from http://docbook.sourceforge.net/release/xsl/current/html/ # Makefile from BitBake/OpenEmbedded manuals +EXTRA_DEPS = gen-ggsn-vty-docbook + +topdir = . +ggsn_reference = $(topdir)/osmoggsn-vty-reference.xml +manuals = $(ggsn_reference) +# types = pdf txt rtf ps xhtml html man tex texi dvi +# types = pdf txt +types = $(docbooktotypes) +docbooktotypes = pdf +# htmlcssfile = +# htmlcss = + TOPDIR := .. ASCIIDOCS := osmoggsn-usermanual @@ -10,4 +22,18 @@ osmoggsn-usermanual.pdf: chapters/*.adoc clean: - rm -rf $(cleanfiles) + -rm -rf $(cleanfiles) + -rm osmoggsn-usermanual__*.svg osmoggsn-usermanual__*.png + -rm osmoggsn-usermanual.check + +gen-ggsn-vty-docbook: FORCE + $(call command,xsltproc -o generated/combined1.xml \ + --stringparam with $(PWD)/../common/vty_additions.xml \ + $(MERGE_DOC) vty/ggsn_vty_reference.xml, \ + XSLTPROC,Merging Common VTY) + $(call command,xsltproc -o generated/combined2.xml \ + --stringparam with $(PWD)/vty/ggsn_vty_additions.xml \ + $(MERGE_DOC) generated/combined1.xml, \ + XSLTPROC,Merging GGSN VTY) + $(call command,xsltproc ../vty_reference.xsl generated/combined2.xml > generated/docbook_vty.xml, \ + XSLTPROC,Converting GGSN VTY to DocBook) diff --git a/OsmoGGSN/osmoggsn-vty-reference.xml b/OsmoGGSN/osmoggsn-vty-reference.xml new file mode 100644 index 0000000..44e7bfc --- /dev/null +++ b/OsmoGGSN/osmoggsn-vty-reference.xml @@ -0,0 +1,38 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ex:ts=2:sw=42sts=2:et + -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- +--> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V5.0//EN" +"http://www.docbook.org/xml/5.0/dtd/docbook.dtd" [ +<!ENTITY chapter-vty SYSTEM "../common/chapters/vty.xml" > +<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +]> + +<book> + <info> + <revhistory> + <revision> + <revnumber>v1</revnumber> + <date>06th September 2017</date> + <authorinitials>hw</authorinitials> + <revremark>Initial version as of OsmoGGSN v1.0.0</revremark> + </revision> + </revhistory> + + <title>OsmoGGSN VTY Reference</title> + + <copyright> + <year>2017</year> + </copyright> + + <legalnotice> + <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. + </para> + </legalnotice> + </info> + + <!-- Main chapters--> + &chapter-vty; +</book> + diff --git a/OsmoGGSN/vty/ggsn_vty_additions.xml b/OsmoGGSN/vty/ggsn_vty_additions.xml new file mode 100644 index 0000000..1bbeb81 --- /dev/null +++ b/OsmoGGSN/vty/ggsn_vty_additions.xml @@ -0,0 +1,30 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id="9"> + <child_of nodeid='4' /> + <name>Telnet/VTY Configuration Node</name> + <description> + Configure parameters of the Telnet/VTY Interface, such as to which IP address it should bind/listen to. + </description> + </node> + <node id="14"> + <child_of nodeid='4' /> + <name>CTRL Configuration Node</name> + <description> + Configure parameters of the CTRL Interface, such as to which IP address it should bind/listen to. + </description> + </node> + <node id="26"> + <child_of nodeid='4' /> + <name>GGSN Instance Configuration Node</name> + <description> + Configure an Instance of a (virtual) GGSN + </description> + </node> + <node id="27"> + <child_of nodeid='26' /> + <name>APN Configuration Node</name> + <description> + Configure an Access Point Name (APN) inside a GGSN Instance + </description> + </node> +</vtydoc> diff --git a/OsmoGGSN/vty/ggsn_vty_reference.xml b/OsmoGGSN/vty/ggsn_vty_reference.xml new file mode 100644 index 0000000..6809ead --- /dev/null +++ b/OsmoGGSN/vty/ggsn_vty_reference.xml @@ -0,0 +1,1480 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='0'> + </node> + <node id='1'> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Turn on privileged mode command' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='ip' doc='IP Pool and other groups' /> + <param name='tun' doc='Tunnel interface' /> + <param name='ggsn' doc='GGSN' /> + <param name='sgsn' doc='SGSN Emulator' /> + <param name='icmp6' doc='ICMPv6' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show stats'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + </params> + </command> + <command id='show stats level (global|peer|subscriber)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Show global groups only' /> + <param name='peer' doc='Show global and network peer related groups' /> + <param name='subscriber' doc='Show global, peer, and subscriber groups' /> + </params> + </command> + <command id='show asciidoc counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='asciidoc' doc='Asciidoc generation' /> + <param name='counters' doc='Generate table of all registered counters' /> + </params> + </command> + <command id='show pdp-context ggsn NAME [apn APN]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='pdp-context' doc='Show PDP Context Information' /> + <param name='ggsn' doc='Gateway GPRS Support NODE (GGSN)' /> + <param name='NAME' doc='GGSN Name' /> + <param name='[apn' doc='(null)' /> + <param name='APN]' doc='(null)' /> + </params> + </command> + <command id='show pdp-context imsi IMSI [<0-15>]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='pdp-context' doc='Display information on PDP Context' /> + <param name='imsi' doc='PDP contexts for given IMSI' /> + <param name='IMSI' doc='PDP context for given NSAPI' /> + <param name='[<0-15>]' doc='(null)' /> + </params> + </command> + <command id='show ggsn [NAME]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='ggsn' doc='Display information on the GGSN' /> + <param name='[NAME]' doc='(null)' /> + </params> + </command> + </node> + <node id='2'> + </node> + <node id='3'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Turn off privileged mode command' /> + </params> + </command> + <command id='configure terminal'> + <params> + <param name='configure' doc='Configuration from vty interface' /> + <param name='terminal' doc='Configuration terminal' /> + </params> + </command> + <command id='copy running-config startup-config'> + <params> + <param name='copy' doc='Copy configuration' /> + <param name='running-config' doc='Copy running config to... ' /> + <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> + </params> + </command> + <command id='show startup-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='startup-config' doc='Contentes of startup configuration' /> + </params> + </command> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='terminal monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='terminal no monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='ip' doc='IP Pool and other groups' /> + <param name='tun' doc='Tunnel interface' /> + <param name='ggsn' doc='GGSN' /> + <param name='sgsn' doc='SGSN Emulator' /> + <param name='icmp6' doc='ICMPv6' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show stats'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + </params> + </command> + <command id='show stats level (global|peer|subscriber)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Show global groups only' /> + <param name='peer' doc='Show global and network peer related groups' /> + <param name='subscriber' doc='Show global, peer, and subscriber groups' /> + </params> + </command> + <command id='show asciidoc counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='asciidoc' doc='Asciidoc generation' /> + <param name='counters' doc='Generate table of all registered counters' /> + </params> + </command> + <command id='show pdp-context ggsn NAME [apn APN]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='pdp-context' doc='Show PDP Context Information' /> + <param name='ggsn' doc='Gateway GPRS Support NODE (GGSN)' /> + <param name='NAME' doc='GGSN Name' /> + <param name='[apn' doc='(null)' /> + <param name='APN]' doc='(null)' /> + </params> + </command> + <command id='show pdp-context imsi IMSI [<0-15>]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='pdp-context' doc='Display information on PDP Context' /> + <param name='imsi' doc='PDP contexts for given IMSI' /> + <param name='IMSI' doc='PDP context for given NSAPI' /> + <param name='[<0-15>]' doc='(null)' /> + </params> + </command> + <command id='show ggsn [NAME]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='ggsn' doc='Display information on the GGSN' /> + <param name='[NAME]' doc='(null)' /> + </params> + </command> + </node> + <node id='4'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='hostname WORD'> + <params> + <param name='hostname' doc='Set system's network name' /> + <param name='WORD' doc='This system's network name' /> + </params> + </command> + <command id='no hostname [HOSTNAME]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='hostname' doc='Reset system's network name' /> + <param name='[HOSTNAME]' doc='Host name of this router' /> + </params> + </command> + <command id='password (8|) WORD'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN line password string' /> + </params> + </command> + <command id='password LINE'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> + </params> + </command> + <command id='enable password (8|) WORD'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN 'enable' password string' /> + </params> + </command> + <command id='enable password LINE'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> + </params> + </command> + <command id='no enable password'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + </params> + </command> + <command id='banner motd default'> + <params> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + <param name='default' doc='Default string' /> + </params> + </command> + <command id='banner motd file [FILE]'> + <params> + <param name='banner' doc='Set banner' /> + <param name='motd' doc='Banner for motd' /> + <param name='file' doc='Banner from a file' /> + <param name='[FILE]' doc='Filename' /> + </params> + </command> + <command id='no banner motd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + </params> + </command> + <command id='service terminal-length <0-512>'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='no service terminal-length [<0-512>]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='line vty'> + <params> + <param name='line' doc='Configure a terminal line' /> + <param name='vty' doc='Virtual terminal' /> + </params> + </command> + <command id='service advanced-vty'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='no service advanced-vty'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='log stderr'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='no log stderr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='log file .FILENAME'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='no log file .FILENAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='log alarms <2-32700>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + <param name='<2-32700>' doc='Maximum number of messages to log' /> + </params> + </command> + <command id='no log alarms'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + </params> + </command> + <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='authpriv' doc='Security/authorization messages facility' /> + <param name='cron' doc='Clock daemon (cron/at) facility' /> + <param name='daemon' doc='General system daemon facility' /> + <param name='ftp' doc='Ftp daemon facility' /> + <param name='lpr' doc='Line printer facility' /> + <param name='mail' doc='Mail facility' /> + <param name='news' doc='News facility' /> + <param name='user' doc='Generic facility' /> + <param name='uucp' doc='UUCP facility' /> + </params> + </command> + <command id='log syslog local <0-7>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='local' doc='Syslog LOCAL facility' /> + <param name='<0-7>' doc='Local facility number' /> + </params> + </command> + <command id='no log syslog'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + </params> + </command> + <command id='log gsmtap [HOSTNAME]'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='gsmtap' doc='Logging via GSMTAP' /> + <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> + </params> + </command> + <command id='stats reporter statsd'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='statsd' doc='Report to a STATSD server' /> + </params> + </command> + <command id='no stats reporter statsd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='statsd' doc='Report to a STATSD server' /> + </params> + </command> + <command id='stats reporter log'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='log' doc='Report to the logger' /> + </params> + </command> + <command id='no stats reporter log'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='log' doc='Report to the logger' /> + </params> + </command> + <command id='stats interval <1-65535>'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='interval' doc='Set the reporting interval' /> + <param name='<1-65535>' doc='Interval in seconds' /> + </params> + </command> + <command id='ggsn NAME'> + <params> + <param name='ggsn' doc='Configure the Gateway GPRS Support Node' /> + <param name='NAME' doc='GGSN Name (has only local significance)' /> + </params> + </command> + <command id='no ggsn NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='ggsn' doc='Remove the named Gateway GPRS Support Node' /> + <param name='NAME' doc='GGSN Name (has only local significance)' /> + </params> + </command> + <command id='ctrl'> + <params> + <param name='ctrl' doc='Configure the Control Interface' /> + </params> + </command> + </node> + <node id='7'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging level (all|ip|tun|ggsn|sgsn|icmp6|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='ip' doc='IP Pool and other groups' /> + <param name='tun' doc='Tunnel interface' /> + <param name='ggsn' doc='GGSN' /> + <param name='sgsn' doc='SGSN Emulator' /> + <param name='icmp6' doc='ICMPv6' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + </node> + <node id='8'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='local-ip ADDR'> + <params> + <param name='local-ip' doc='Set the IP address to which we bind locally' /> + <param name='ADDR' doc='IP Address' /> + </params> + </command> + <command id='no local-ip'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='local-ip' doc='Set the IP address to which we bind locally' /> + </params> + </command> + <command id='remote-ip ADDR'> + <params> + <param name='remote-ip' doc='Set the remote IP address to which we connect' /> + <param name='ADDR' doc='IP Address' /> + </params> + </command> + <command id='remote-port <1-65535>'> + <params> + <param name='remote-port' doc='Set the remote port to which we connect' /> + <param name='<1-65535>' doc='Remote port number' /> + </params> + </command> + <command id='mtu <100-65535>'> + <params> + <param name='mtu' doc='Set the maximum packet size' /> + <param name='<100-65535>' doc='Size in byte' /> + </params> + </command> + <command id='no mtu'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='mtu' doc='Set the maximum packet size' /> + </params> + </command> + <command id='prefix PREFIX'> + <params> + <param name='prefix' doc='Set the item name prefix' /> + <param name='PREFIX' doc='The prefix string' /> + </params> + </command> + <command id='no prefix'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='prefix' doc='Set the item name prefix' /> + </params> + </command> + <command id='level (global|peer|subscriber)'> + <params> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Report global groups only' /> + <param name='peer' doc='Report global and network peer related groups' /> + <param name='subscriber' doc='Report global, peer, and subscriber groups' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Enable the reporter' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Disable the reporter' /> + </params> + </command> + </node> + <node id='9'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='login'> + <params> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='no login'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='bind A.B.C.D'> + <params> + <param name='bind' doc='Accept VTY telnet connections on local interface' /> + <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> + </params> + </command> + </node> + <node id='14'> + <command id='bind A.B.C.D'> + <params> + <param name='bind' doc='Set bind address to listen for Control connections' /> + <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' /> + </params> + </command> + </node> + <node id='26'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='description .TEXT'> + <params> + <param name='description' doc='Save human-readable description of the object' /> + <param name='.TEXT' doc='Text until the end of the line' /> + </params> + </command> + <command id='no description'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='description' doc='Remove description of the object' /> + </params> + </command> + <command id='shutdown ggsn'> + <params> + <param name='shutdown' doc='Put the GGSN in administrative shut-down' /> + <param name='ggsn' doc='Gateway GPRS Support NODE (GGSN)' /> + </params> + </command> + <command id='no shutdown ggsn'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='shutdown' doc='Gateway GPRS Support NODE (GGSN)' /> + <param name='ggsn' doc='Remove the GGSN from administrative shut-down' /> + </params> + </command> + <command id='gtp bind-ip A.B.C.D'> + <params> + <param name='gtp' doc='GTP Parameters' /> + <param name='bind-ip' doc='Set the IP address for the local GTP bind' /> + <param name='A.B.C.D' doc='IPv4 Address' /> + </params> + </command> + <command id='gtp control-ip A.B.C.D'> + <params> + <param name='gtp' doc='GTP Parameters' /> + <param name='control-ip' doc='Set the IP address states as local IP in GTP-C messages' /> + <param name='A.B.C.D' doc='IPv4 Address' /> + </params> + </command> + <command id='gtp user-ip A.B.C.D'> + <params> + <param name='gtp' doc='GTP Parameters' /> + <param name='user-ip' doc='Set the IP address states as local IP in GTP-U messages' /> + <param name='A.B.C.D' doc='IPv4 Address' /> + </params> + </command> + <command id='gtp state-dir PATH'> + <params> + <param name='gtp' doc='GTP Parameters' /> + <param name='state-dir' doc='Set the directory for the GTP State file' /> + <param name='PATH' doc='Local Directory' /> + </params> + </command> + <command id='apn NAME'> + <params> + <param name='apn' doc='APN Configuration' /> + <param name='NAME' doc='APN Name' /> + </params> + </command> + <command id='no apn NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='apn' doc='Remove APN Configuration' /> + <param name='NAME' doc='APN Name' /> + </params> + </command> + <command id='default-apn NAME'> + <params> + <param name='default-apn' doc='Set a default-APN to be used if no other APN matches' /> + <param name='NAME' doc='APN Name' /> + </params> + </command> + <command id='no default-apn'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='default-apn' doc='Remove default-APN to be used if no other APN matches' /> + </params> + </command> + </node> + <node id='27'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='description .TEXT'> + <params> + <param name='description' doc='Save human-readable description of the object' /> + <param name='.TEXT' doc='Text until the end of the line' /> + </params> + </command> + <command id='no description'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='description' doc='Remove description of the object' /> + </params> + </command> + <command id='shutdown'> + <params> + <param name='shutdown' doc='Put the APN in administrative shut-down' /> + </params> + </command> + <command id='no shutdown'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='shutdown' doc='Remove the APN from administrative shut-down' /> + </params> + </command> + <command id='gtpu-mode (tun|kernel-gtp)'> + <params> + <param name='gtpu-mode' doc='Set the Mode for this APN (tun or Linux Kernel GTP)' /> + <param name='tun' doc='GTP-U in userspace using TUN device' /> + <param name='kernel-gtp' doc='GTP-U in kernel using Linux Kernel GTP' /> + </params> + </command> + <command id='type-support (v4|v6|v4v6)'> + <params> + <param name='type-support' doc='Enable support for PDP Type' /> + <param name='v4' doc='IPv4(-only) PDP Type' /> + <param name='v6' doc='IPv6(-only) PDP Type' /> + <param name='v4v6' doc='IPv4v6 (dual-stack) PDP Type' /> + </params> + </command> + <command id='no type-support (v4|v6|v4v6)'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='type-support' doc='Disable support for PDP Type' /> + <param name='v4' doc='IPv4(-only) PDP Type' /> + <param name='v6' doc='IPv6(-only) PDP Type' /> + <param name='v4v6' doc='IPv4v6 (dual-stack) PDP Type' /> + </params> + </command> + <command id='tun-device NAME'> + <params> + <param name='tun-device' doc='Configure tun device name' /> + <param name='NAME' doc='TUN device name' /> + </params> + </command> + <command id='ipup-script PATH'> + <params> + <param name='ipup-script' doc='Configure name/path of ip-up script' /> + <param name='PATH' doc='File/Path name of ip-up script' /> + </params> + </command> + <command id='no ipup-script'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='ipup-script' doc='Disable ip-up script' /> + </params> + </command> + <command id='ipdown-script PATH'> + <params> + <param name='ipdown-script' doc='Configure name/path of ip-down script' /> + <param name='PATH' doc='File/Path name of ip-down script' /> + </params> + </command> + <command id='no ipdown-script'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='ipdown-script' doc='Disable ip-down script' /> + </params> + </command> + <command id='ip prefix (static|dynamic) A.B.C.D/M'> + <params> + <param name='ip' doc='IP information' /> + <param name='prefix' doc='Prefix (Network/Netmask)' /> + <param name='static' doc='IPv4 Adress/Prefix-Length' /> + <param name='dynamic' doc='(null)' /> + <param name='A.B.C.D/M' doc='(null)' /> + </params> + </command> + <command id='ipv6 prefix (static|dynamic) X:X::X:X/M'> + <params> + <param name='ipv6' doc='IPv6 Information' /> + <param name='prefix' doc='Prefix (Network/Netmask)' /> + <param name='static' doc='IPv6 Address/Prefix-Length' /> + <param name='dynamic' doc='(null)' /> + <param name='X:X::X:X/M' doc='(null)' /> + </params> + </command> + <command id='ip dns <0-1> A.B.C.D'> + <params> + <param name='ip' doc='IP information' /> + <param name='dns' doc='Configure DNS Server' /> + <param name='<0-1>' doc='primary/secondary DNS' /> + <param name='A.B.C.D' doc='IP address of DNS Sever' /> + </params> + </command> + <command id='ipv6 dns <0-1> X:X::X:X'> + <params> + <param name='ipv6' doc='IPv6 Information' /> + <param name='dns' doc='Configure DNS Server' /> + <param name='<0-1>' doc='primary/secondary DNS' /> + <param name='X:X::X:X' doc='IP address of DNS Sever' /> + </params> + </command> + <command id='no (ip|ipv6) dns <0-1>'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='ip' doc='IP information' /> + <param name='ipv6' doc='IPv6 Information' /> + <param name='dns' doc='Disable DNS Server' /> + <param name='<0-1>' doc='primary/secondary DNS' /> + </params> + </command> + <command id='ip ifconfig A.B.C.D/M'> + <params> + <param name='ip' doc='IP information' /> + <param name='ifconfig' doc='GGSN-based interface configuration' /> + <param name='A.B.C.D/M' doc='IPv4 Adress/Prefix-Length' /> + </params> + </command> + <command id='no ip ifconfig'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='ip' doc='IP information' /> + <param name='ifconfig' doc='GGSN-based interface configuration' /> + </params> + </command> + <command id='ipv6 ifconfig X:X::X:X/M'> + <params> + <param name='ipv6' doc='IPv6 Information' /> + <param name='ifconfig' doc='GGSN-based interface configuration' /> + <param name='X:X::X:X/M' doc='IPv6 Adress/Prefix-Length' /> + </params> + </command> + <command id='no ipv6 ifconfig'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='ipv6' doc='IPv6 Information' /> + <param name='ifconfig' doc='GGSN-based interface configuration' /> + </params> + </command> + </node> +</vtydoc> \ No newline at end of file -- To view, visit https://gerrit.osmocom.org/3879 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: merged Gerrit-Change-Id: Iddf6fe26689172d7db001198943c816eaaed7931 Gerrit-PatchSet: 2 Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Owner: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder