osmo-gsm-tester[master]: OsmoPcuSysmo: Integrate with Sysmobts and OsmoSgsn

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

Harald Welte gerrit-no-reply at lists.osmocom.org
Fri Nov 24 13:30:49 UTC 2017


Patch Set 1:

(6 comments)

https://gerrit.osmocom.org/#/c/5006/1/src/osmo_gsm_tester/templates/osmo-bsc.cfg.tmpl
File src/osmo_gsm_tester/templates/osmo-bsc.cfg.tmpl:

PS1, Line 65: gprs
probably one would want to have a template here to decide if GPRS or EGPRS shall be used / tested ?


PS1, Line 66: 0
I'm not sure if RAC=0 is valid. LAC=0 has special meaning (MS detached), so RAC=0 could also have special meaning?  Probably easiest to use a different value just in case (quicker than extensive spec review).  Also, it might be useful to have it as template variable, like LAC?


PS1, Line 68: 1800
the BVCI must be different for each BTS/PCU that connects to the SGSN.  My "poor man solution" is to always set it to the same as the unit_id, they both are 16bit, IIRC.


PS1, Line 80: 1800
see BVCI above.  must also be unique for each PCU connecting to the SGSN.  For ease-of-use, set to BVCI value.


PS1, Line 88: 1800
see BVCI and NSEI discussion


https://gerrit.osmocom.org/#/c/5006/1/src/osmo_gsm_tester/templates/osmo-nitb.cfg.tmpl
File src/osmo_gsm_tester/templates/osmo-nitb.cfg.tmpl:

PS1, Line 56: 180
see comments for BSC


-- 
To view, visit https://gerrit.osmocom.org/5006
To unsubscribe, visit https://gerrit.osmocom.org/settings

Gerrit-MessageType: comment
Gerrit-Change-Id: I01485c5d74e5fe62d0ffea9eb1fad29041426eef
Gerrit-PatchSet: 1
Gerrit-Project: osmo-gsm-tester
Gerrit-Branch: master
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-HasComments: Yes



More information about the gerrit-log mailing list