This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Pau Espin Pedrol gerrit-no-reply at lists.osmocom.org
Review at https://gerrit.osmocom.org/5009
modem: Add minimal GPRS support
Up to this point we can test signalling plane: attaching to GPRS network and activating a
context.
Data plane (sending IP packets through the network) is still not
implemented as it requires setting up the network interface provided by
ofono as well as routing, and most probably move osmo-ggsn to its own
network namespace.
Change-Id: I605ba1bb1103a045a9b5d0e7215c05dfc1fe575f
---
M src/osmo_gsm_tester/modem.py
1 file changed, 59 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-tester refs/changes/09/5009/1
diff --git a/src/osmo_gsm_tester/modem.py b/src/osmo_gsm_tester/modem.py
index 0796fa6..206a081 100644
--- a/src/osmo_gsm_tester/modem.py
+++ b/src/osmo_gsm_tester/modem.py
@@ -37,6 +37,7 @@
I_MODEM = 'org.ofono.Modem'
I_NETREG = 'org.ofono.NetworkRegistration'
I_SMS = 'org.ofono.MessageManager'
+I_CONNMGR = 'org.ofono.ConnectionManager'
I_CALLMGR = 'org.ofono.VoiceCallManager'
I_CALL = 'org.ofono.VoiceCall'
I_SS = 'org.ofono.SupplementaryServices'
@@ -334,6 +335,10 @@
sms_received_list = None
_ki = None
+ CTX_PROT_IPv4 = 'ip'
+ CTX_PROT_IPv6 = 'ipv6'
+ CTX_PROT_IPv46 = 'dual'
+
def __init__(self, conf):
self.conf = conf
self.path = conf.get('path')
@@ -347,6 +352,7 @@
self.dbus.required_signals = {
I_SMS: ( ('IncomingMessage', self._on_incoming_message), ),
I_NETREG: ( ('PropertyChanged', self._on_netreg_property_changed), ),
+ I_CONNMGR: ( ('PropertyChanged', self._on_connmgr_property_changed), ),
I_CALLMGR: ( ('PropertyChanged', self._on_callmgr_property_changed),
('CallAdded', self._on_callmgr_call_added),
('CallRemoved', self._on_callmgr_call_removed), ),
@@ -430,6 +436,7 @@
req_ifaces = (I_NETREG,)
req_ifaces += (I_SMS,) if 'sms' in self.features() else ()
req_ifaces += (I_SS,) if 'ussd' in self.features() else ()
+ req_ifaces += (I_CONNMGR,) if 'gprs' in self.features() else ()
return req_ifaces
def _on_netreg_property_changed(self, name, value):
@@ -531,6 +538,8 @@
self.cancellable = Gio.Cancellable.new()
def power_off(self):
+ if self.dbus.has_interface(I_CONNMGR) and self.is_attached():
+ self.detach()
self.set_online(False)
self.set_powered(False)
req_ifaces = self._required_ifaces()
@@ -562,6 +571,53 @@
else:
self.log('Connect to', mcc_mnc if mcc_mnc else 'default network')
self.schedule_scan_register(mcc_mnc)
+
+ def is_attached(self):
+ connmgr = self.dbus.interface(I_CONNMGR)
+ prop = connmgr.GetProperties()
+ attached = prop.get('Attached')
+ self.dbg('attached:', attached)
+ return attached
+
+ def attach(self, allow_roaming=False):
+ self.dbg('attach')
+ if self.is_attached():
+ self.detach()
+ connmgr = self.dbus.interface(I_CONNMGR)
+ prop = connmgr.SetProperty('RoamingAllowed', Variant('b', allow_roaming))
+ prop = connmgr.SetProperty('Powered', Variant('b', True))
+
+ def detach(self):
+ self.dbg('detach')
+ connmgr = self.dbus.interface(I_CONNMGR)
+ prop = connmgr.SetProperty('RoamingAllowed', Variant('b', False))
+ prop = connmgr.SetProperty('Powered', Variant('b', False))
+ connmgr.DeactivateAll()
+ connmgr.ResetContexts() # Requires Powered=false
+
+ def activate_context(self, apn='internet', user='ogt', pwd='', protocol='ip'):
+ self.dbg('activate_context', apn=apn, user=user)
+
+ connmgr = self.dbus.interface(I_CONNMGR)
+ ctx_path = connmgr.AddContext('internet')
+
+ ctx = systembus_get(ctx_path)
+ ctx.SetProperty('AccessPointName', Variant('s', apn))
+ ctx.SetProperty('Username', Variant('s', user))
+ ctx.SetProperty('Password', Variant('s', pwd))
+ ctx.SetProperty('Protocol', Variant('s', protocol))
+
+ # Activate can only be called after we are attached
+ ctx.SetProperty('Active', Variant('b', True))
+ event_loop.wait(self, lambda: ctx.GetProperties()['Active'] == True)
+ self.log('context activated', path=ctx_path, apn=apn, user=user, properties=ctx.GetProperties())
+ return ctx_path
+
+ def deactivate_context(self, ctx_id):
+ self.dbg('activate_context', path=ctx_id)
+ ctx = systembus_get(ctx_id)
+ ctx.SetProperty('Active', Variant('b', False))
+ event_loop.wait(self, lambda: ctx.GetProperties()['Active'] == False)
def sms_send(self, to_msisdn_or_modem, *tokens):
if isinstance(to_msisdn_or_modem, Modem):
@@ -663,6 +719,9 @@
def _on_callmgr_property_changed(self, name, value):
self.dbg('%r.PropertyChanged() -> %s=%s' % (I_CALLMGR, name, value))
+ def _on_connmgr_property_changed(self, name, value):
+ self.dbg('%r.PropertyChanged() -> %s=%s' % (I_CONNMGR, name, value))
+
def info(self, keys=('Manufacturer', 'Model', 'Revision', 'Serial')):
props = self.properties()
return ', '.join(['%s: %r'%(k,props.get(k)) for k in keys])
--
To view, visit https://gerrit.osmocom.org/5009
To unsubscribe, visit https://gerrit.osmocom.org/settings
Gerrit-MessageType: newchange
Gerrit-Change-Id: I605ba1bb1103a045a9b5d0e7215c05dfc1fe575f
Gerrit-PatchSet: 1
Gerrit-Project: osmo-gsm-tester
Gerrit-Branch: master
Gerrit-Owner: Pau Espin Pedrol <pespin at sysmocom.de>