This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgReview at https://gerrit.osmocom.org/4791 STP: Update vty reference XML file This ensures useful content in the STP vty reference manual Change-Id: Ica4b1c0172255ec2328562fdd8fac190e3ad448d --- A OsmoSTP/vty/osmo-stp_vty_reference.xml D OsmoSTP/vty/stp_vty_reference.xml 2 files changed, 1,742 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/91/4791/1 diff --git a/OsmoSTP/vty/osmo-stp_vty_reference.xml b/OsmoSTP/vty/osmo-stp_vty_reference.xml new file mode 100644 index 0000000..9d25d44 --- /dev/null +++ b/OsmoSTP/vty/osmo-stp_vty_reference.xml @@ -0,0 +1,1742 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='Password'> + </node> + <node id='_1'> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Turn on privileged mode command' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show cs7 instance <0-15> users'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='users' doc='User Table' /> + </params> + </command> + <command id='show cs7 instance <0-15> asp'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='asp' doc='Application Server Process (ASP)' /> + </params> + </command> + <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='as' doc='Application Server (AS)' /> + <param name='active' doc='Display all active ASs' /> + <param name='all' doc='Display all ASs (default)' /> + <param name='m3ua' doc='Display all m3ua ASs' /> + <param name='sua' doc='Display all SUA ASs' /> + </params> + </command> + <command id='show cs7 instance <0-15> route'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='route' doc='Routing Table' /> + </params> + </command> + <command id='show fsm NAME'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm' doc='Show information about finite state machines' /> + <param name='NAME' doc='Display information about a single named finite state machine' /> + </params> + </command> + <command id='show fsm all'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm' doc='Show information about finite state machines' /> + <param name='all' doc='Display a list of all registered finite state machines' /> + </params> + </command> + <command id='show fsm-instances NAME'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm-instances' doc='Show information about finite state machine instances' /> + <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' /> + </params> + </command> + <command id='show fsm-instances all'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm-instances' doc='Show information about finite state machine instances' /> + <param name='all' doc='Display a list of all FSM instances of all finite state machine' /> + </params> + </command> + </node> + <node id='Password_2'> + </node> + <node id='_2'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Turn off privileged mode command' /> + </params> + </command> + <command id='configure terminal'> + <params> + <param name='configure' doc='Configuration from vty interface' /> + <param name='terminal' doc='Configuration terminal' /> + </params> + </command> + <command id='copy running-config startup-config'> + <params> + <param name='copy' doc='Copy configuration' /> + <param name='running-config' doc='Copy running config to... ' /> + <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> + </params> + </command> + <command id='show startup-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='startup-config' doc='Contentes of startup configuration' /> + </params> + </command> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='terminal monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='terminal no monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show cs7 instance <0-15> users'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='users' doc='User Table' /> + </params> + </command> + <command id='show cs7 instance <0-15> asp'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='asp' doc='Application Server Process (ASP)' /> + </params> + </command> + <command id='show cs7 instance <0-15> as (active|all|m3ua|sua)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='as' doc='Application Server (AS)' /> + <param name='active' doc='Display all active ASs' /> + <param name='all' doc='Display all ASs (default)' /> + <param name='m3ua' doc='Display all m3ua ASs' /> + <param name='sua' doc='Display all SUA ASs' /> + </params> + </command> + <command id='show cs7 instance <0-15> route'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='route' doc='Routing Table' /> + </params> + </command> + <command id='show fsm NAME'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm' doc='Show information about finite state machines' /> + <param name='NAME' doc='Display information about a single named finite state machine' /> + </params> + </command> + <command id='show fsm all'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm' doc='Show information about finite state machines' /> + <param name='all' doc='Display a list of all registered finite state machines' /> + </params> + </command> + <command id='show fsm-instances NAME'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm-instances' doc='Show information about finite state machine instances' /> + <param name='NAME' doc='Display a list of all FSM instances of the named finite state machine' /> + </params> + </command> + <command id='show fsm-instances all'> + <params> + <param name='show' doc='Show running system information' /> + <param name='fsm-instances' doc='Show information about finite state machine instances' /> + <param name='all' doc='Display a list of all FSM instances of all finite state machine' /> + </params> + </command> + </node> + <node id='config'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='hostname WORD'> + <params> + <param name='hostname' doc='Set system's network name' /> + <param name='WORD' doc='This system's network name' /> + </params> + </command> + <command id='no hostname [HOSTNAME]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='hostname' doc='Reset system's network name' /> + <param name='[HOSTNAME]' doc='Host name of this router' /> + </params> + </command> + <command id='password (8|) WORD'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN line password string' /> + </params> + </command> + <command id='password LINE'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> + </params> + </command> + <command id='enable password (8|) WORD'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN 'enable' password string' /> + </params> + </command> + <command id='enable password LINE'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> + </params> + </command> + <command id='no enable password'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + </params> + </command> + <command id='banner motd default'> + <params> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + <param name='default' doc='Default string' /> + </params> + </command> + <command id='banner motd file [FILE]'> + <params> + <param name='banner' doc='Set banner' /> + <param name='motd' doc='Banner for motd' /> + <param name='file' doc='Banner from a file' /> + <param name='[FILE]' doc='Filename' /> + </params> + </command> + <command id='no banner motd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + </params> + </command> + <command id='service terminal-length <0-512>'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='no service terminal-length [<0-512>]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='line vty'> + <params> + <param name='line' doc='Configure a terminal line' /> + <param name='vty' doc='Virtual terminal' /> + </params> + </command> + <command id='service advanced-vty'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='no service advanced-vty'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='log stderr'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='no log stderr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='log file .FILENAME'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='no log file .FILENAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='log alarms <2-32700>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + <param name='<2-32700>' doc='Maximum number of messages to log' /> + </params> + </command> + <command id='no log alarms'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + </params> + </command> + <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='authpriv' doc='Security/authorization messages facility' /> + <param name='cron' doc='Clock daemon (cron/at) facility' /> + <param name='daemon' doc='General system daemon facility' /> + <param name='ftp' doc='Ftp daemon facility' /> + <param name='lpr' doc='Line printer facility' /> + <param name='mail' doc='Mail facility' /> + <param name='news' doc='News facility' /> + <param name='user' doc='Generic facility' /> + <param name='uucp' doc='UUCP facility' /> + </params> + </command> + <command id='log syslog local <0-7>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='local' doc='Syslog LOCAL facility' /> + <param name='<0-7>' doc='Local facility number' /> + </params> + </command> + <command id='no log syslog'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + </params> + </command> + <command id='log gsmtap [HOSTNAME]'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='gsmtap' doc='Logging via GSMTAP' /> + <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> + </params> + </command> + <command id='cs7 instance <0-15>'> + <params> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='Configure a SS7 Instance' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + </params> + </command> + </node> + <node id='config-log'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging level (all|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + </node> + <node id='config-line'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='login'> + <params> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='no login'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='bind A.B.C.D'> + <params> + <param name='bind' doc='Accept VTY telnet connections on local interface' /> + <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> + </params> + </command> + </node> + <node id='config-cs7'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='description .TEXT'> + <params> + <param name='description' doc='Save human-readable description of the object' /> + <param name='.TEXT' doc='Text until the end of the line' /> + </params> + </command> + <command id='network-indicator (international | national | reserved | spare)'> + <params> + <param name='network-indicator' doc='Configure the Network Indicator' /> + <param name='international' doc='International Network' /> + <param name='national' doc='National Network' /> + <param name='reserved' doc='Reserved Network' /> + <param name='spare' doc='Spare Network' /> + </params> + </command> + <command id='point-code POINT_CODE'> + <params> + <param name='point-code' doc='Configure the local Point Code' /> + <param name='POINT_CODE' doc='Point Code' /> + </params> + </command> + <command id='point-code format <1-24> [<1-23>] [<1-22>]'> + <params> + <param name='point-code' doc='Point Code' /> + <param name='format' doc='Configure Point Code Format' /> + <param name='<1-24>' doc='Length of first PC component' /> + <param name='[<1-23>]' doc='Length of second PC component' /> + <param name='[<1-22>]' doc='Length of third PC component' /> + </params> + </command> + <command id='point-code format default'> + <params> + <param name='point-code' doc='Point Code' /> + <param name='format' doc='Configure Point Code Format' /> + <param name='default' doc='Default Point Code Format (3.8.3)' /> + </params> + </command> + <command id='point-code delimiter (default|dash)'> + <params> + <param name='point-code' doc='Point Code' /> + <param name='delimiter' doc='Configure Point Code Delimiter' /> + <param name='default' doc='Use dot as delimiter' /> + <param name='dash' doc='User dash as delimiter' /> + </params> + </command> + <command id='xua rkm routing-key-allocation (static-only|dynamic-permitted)'> + <params> + <param name='xua' doc='SIGTRAN xxxUA related' /> + <param name='rkm' doc='Routing Key Management' /> + <param name='routing-key-allocation' doc='Routing Key Management Allocation Policy' /> + <param name='static-only' doc='Only static (pre-confgured) Routing Keys permitted' /> + <param name='dynamic-permitted' doc='Dynamically allocate Routing Keys for what ASPs request' /> + </params> + </command> + <command id='asp NAME <0-65535> <0-65535> (sua|m3ua|ipa)'> + <params> + <param name='asp' doc='Configure Application Server Process' /> + <param name='NAME' doc='Name of ASP' /> + <param name='<0-65535>' doc='Remote SCTP port number' /> + <param name='<0-65535>' doc='Local SCTP port number' /> + <param name='sua' doc='SCCP User Adaptation' /> + <param name='m3ua' doc='MTP3 User Adaptation' /> + <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> + </params> + </command> + <command id='no asp NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='asp' doc='Disable Application Server Process' /> + <param name='NAME' doc='Name of ASP' /> + </params> + </command> + <command id='as NAME (sua|m3ua|ipa)'> + <params> + <param name='as' doc='Configure an Application Server' /> + <param name='NAME' doc='Name of the Application Server' /> + <param name='sua' doc='SCCP User Adaptation' /> + <param name='m3ua' doc='MTP3 User Adaptation' /> + <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> + </params> + </command> + <command id='no as NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='as' doc='Disable Application Server' /> + <param name='NAME' doc='Name of AS' /> + </params> + </command> + <command id='show cs7 instance <0-15> sccp-addressbook'> + <params> + <param name='show' doc='Show running system information' /> + <param name='cs7' doc='ITU-T Signaling System 7' /> + <param name='instance' doc='An instance of the SS7 stack' /> + <param name='<0-15>' doc='An instance of the SS7 stack' /> + <param name='sccp-addressbook' doc='List all SCCP addressbook entries' /> + </params> + </command> + <command id='sccp-address NAME'> + <params> + <param name='sccp-address' doc='Create/Modify an SCCP addressbook entry' /> + <param name='NAME' doc='Name of the SCCP Address' /> + </params> + </command> + <command id='no sccp-address NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sccp-address' doc='Delete an SCCP addressbook entry' /> + <param name='NAME' doc='Name of the SCCP Address' /> + </params> + </command> + <command id='route-table system'> + <params> + <param name='route-table' doc='Specify the name of the route table' /> + <param name='system' doc='Name of the route table' /> + </params> + </command> + <command id='listen (sua|m3ua|ipa) <0-65534>'> + <params> + <param name='listen' doc='Configure/Enable xUA Listener' /> + <param name='sua' doc='SCCP User Adaptation' /> + <param name='m3ua' doc='MTP3 User Adaptation' /> + <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> + <param name='<0-65534>' doc='SCTP Port number' /> + </params> + </command> + <command id='no listen (sua|m3ua|ipa) <0-65534>'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='listen' doc='Disable xUA Listener on given SCTP Port' /> + <param name='sua' doc='SCCP User Adaptation' /> + <param name='m3ua' doc='MTP3 User Adaptation' /> + <param name='ipa' doc='IPA Multiplex (SCCP Lite)' /> + <param name='<0-65534>' doc='SCTP Port number' /> + </params> + </command> + </node> + <node id='config-cs7-as'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='description .TEXT'> + <params> + <param name='description' doc='Save human-readable description of the object' /> + <param name='.TEXT' doc='Text until the end of the line' /> + </params> + </command> + <command id='asp NAME'> + <params> + <param name='asp' doc='Specify that a given ASP is part of this AS' /> + <param name='NAME' doc='Name of ASP to be added to AS' /> + </params> + </command> + <command id='no asp NAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='asp' doc='Specify ASP to be removed from this AS' /> + <param name='NAME' doc='Name of ASP to be removed' /> + </params> + </command> + <command id='traffic-mode (broadcast | loadshare | roundrobin | override)'> + <params> + <param name='traffic-mode' doc='Specifies traffic mode of operation of the ASP within the AS' /> + <param name='broadcast' doc='Broadcast to all ASP within AS' /> + <param name='loadshare' doc='Share Load among all ASP within AS' /> + <param name='roundrobin' doc='Round-Robin between all ASP within AS' /> + <param name='override' doc='Override' /> + </params> + </command> + <command id='recovery-timeout <1-2000>'> + <params> + <param name='recovery-timeout' doc='Specifies the recovery timeout value in milliseconds' /> + <param name='<1-2000>' doc='Recovery Timeout in Milliseconds' /> + </params> + </command> + <command id='qos-class <0-255>'> + <params> + <param name='qos-class' doc='Specity QoS Class of AS' /> + <param name='<0-255>' doc='QoS Class of AS' /> + </params> + </command> + <command id='routing-key RCONTEXT DPC'> + <params> + <param name='routing-key' doc='Define a routing key' /> + <param name='RCONTEXT' doc='Routing context number' /> + <param name='DPC' doc='Destination Point Code' /> + </params> + </command> + <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup)'> + <params> + <param name='routing-key' doc='Define a routing key' /> + <param name='RCONTEXT' doc='Routing context number' /> + <param name='DPC' doc='Destination Point Code' /> + <param name='si' doc='Match on Service Indicator' /> + <param name='aal2' doc='ATM Adaption Layer 2' /> + <param name='bicc' doc='Bearer Independent Call Control' /> + <param name='b-isup' doc='Broadband ISDN User Part' /> + <param name='h248' doc='H.248' /> + <param name='isup' doc='ISDN User Part' /> + <param name='sat-isup' doc='Sattelite ISDN User Part' /> + <param name='sccp' doc='Signalling Connection Control Part' /> + <param name='tup' doc='Telephony User Part' /> + </params> + </command> + <command id='routing-key RCONTEXT DPC ssn SSN'> + <params> + <param name='routing-key' doc='Define a routing key' /> + <param name='RCONTEXT' doc='Routing context number' /> + <param name='DPC' doc='Destination Point Code' /> + <param name='ssn' doc='Match on Sub-System Number' /> + <param name='SSN' doc='Sub-System Number to match on' /> + </params> + </command> + <command id='routing-key RCONTEXT DPC si (aal2|bicc|b-isup|h248|isup|sat-isup|sccp|tup) ssn SSN'> + <params> + <param name='routing-key' doc='Define a routing key' /> + <param name='RCONTEXT' doc='Routing context number' /> + <param name='DPC' doc='Destination Point Code' /> + <param name='si' doc='Match on Service Indicator' /> + <param name='aal2' doc='ATM Adaption Layer 2' /> + <param name='bicc' doc='Bearer Independent Call Control' /> + <param name='b-isup' doc='Broadband ISDN User Part' /> + <param name='h248' doc='H.248' /> + <param name='isup' doc='ISDN User Part' /> + <param name='sat-isup' doc='Sattelite ISDN User Part' /> + <param name='sccp' doc='Signalling Connection Control Part' /> + <param name='tup' doc='Telephony User Part' /> + <param name='ssn' doc='Match on Sub-System Number' /> + <param name='SSN' doc='Sub-System Number to match on' /> + </params> + </command> + <command id='point-code override dpc PC'> + <params> + <param name='point-code' doc='Point Code Specific Features' /> + <param name='override' doc='Override (force) a point-code to hard-coded value' /> + <param name='dpc' doc='Override Source Point Code' /> + <param name='PC' doc='Override Destination Point Code' /> + </params> + </command> + </node> + <node id='config-cs7-asp'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='description .TEXT'> + <params> + <param name='description' doc='Save human-readable description of the object' /> + <param name='.TEXT' doc='Text until the end of the line' /> + </params> + </command> + <command id='remote-ip A.B.C.D'> + <params> + <param name='remote-ip' doc='Specify Remote IP Address of ASP' /> + <param name='A.B.C.D' doc='Remote IP Address of ASP' /> + </params> + </command> + <command id='local-ip A.B.C.D'> + <params> + <param name='local-ip' doc='Specify Local IP Address from which to contact ASP' /> + <param name='A.B.C.D' doc='Local IP Address from which to contact of ASP' /> + </params> + </command> + <command id='qos-class <0-255>'> + <params> + <param name='qos-class' doc='Specify QoS Class of ASP' /> + <param name='<0-255>' doc='QoS Class of ASP' /> + </params> + </command> + <command id='block'> + <params> + <param name='block' doc='Allows a SCTP Association with ASP, but doesn't let it become active' /> + </params> + </command> + <command id='shutdown'> + <params> + <param name='shutdown' doc='Terminates SCTP association; New associations will be rejected' /> + </params> + </command> + </node> + <node id='config-cs7-listen'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='local-ip A.B.C.D'> + <params> + <param name='local-ip' doc='Configure the Local IP Address for xUA' /> + <param name='A.B.C.D' doc='IP Address to use for XUA' /> + </params> + </command> + <command id='accept-asp-connections (pre-configured|dynamic-permitted)'> + <params> + <param name='accept-asp-connections' doc='Define what kind of ASP connections to accept' /> + <param name='pre-configured' doc='Accept only pre-confiugred ASPs (source IP/prt)' /> + <param name='dynamic-permitted' doc='Accept any connection and dynamically create an ASP definition' /> + </params> + </command> + </node> + <node id='config-cs7-rt'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='description .TEXT'> + <params> + <param name='description' doc='Save human-readable description of the object' /> + <param name='.TEXT' doc='Text until the end of the line' /> + </params> + </command> + <command id='update route POINT_CODE MASK linkset LS_NAME [priority PRIO] [qos-class (CLASS|default)]'> + <params> + <param name='update' doc='Update the Route' /> + <param name='route' doc='Update the Route' /> + <param name='POINT_CODE' doc='Destination Point Code' /> + <param name='MASK' doc='Point Code Mask' /> + <param name='linkset' doc='Point Code Length' /> + <param name='LS_NAME' doc='Specify Destination Linkset' /> + <param name='[priority' doc='Linkset Name' /> + <param name='PRIO]' doc='Specify Priority' /> + <param name='[qos-class' doc='Priority' /> + <param name='CLASS' doc='Specify QoS Class' /> + <param name='default' doc='QoS Class' /> + <param name=']' doc='Default QoS Class' /> + </params> + </command> + <command id='remove route POINT_CODE MASK'> + <params> + <param name='remove' doc='Remove a Route' /> + <param name='route' doc='Remove a Route' /> + <param name='POINT_CODE' doc='Destination Point Code' /> + <param name='MASK' doc='Point Code Mask' /> + </params> + </command> + </node> + <node id='config-cs7-sccpaddr'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='no point-code'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='point-code' doc='Remove point-code Number' /> + </params> + </command> + <command id='no subsystem-number'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='subsystem-number' doc='Remove Subsystem Number' /> + </params> + </command> + <command id='no global-title'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='global-title' doc='Remove Global Title' /> + </params> + </command> + <command id='routing-indicator (GT|PC|IP)'> + <params> + <param name='routing-indicator' doc='Add Routing Indicator' /> + <param name='GT' doc='by global-title' /> + <param name='PC' doc='by point-code' /> + <param name='IP' doc='by ip-address' /> + </params> + </command> + <command id='point-code POINT_CODE'> + <params> + <param name='point-code' doc='Add point-code Number' /> + <param name='POINT_CODE' doc='PC' /> + </params> + </command> + <command id='subsystem-number <0-4294967295>'> + <params> + <param name='subsystem-number' doc='Add Subsystem Number' /> + <param name='<0-4294967295>' doc='SSN' /> + </params> + </command> + <command id='global-title'> + <params> + <param name='global-title' doc='Add/Modify Global Title' /> + </params> + </command> + </node> + <node id='config-cs7-sccpaddr-gt'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='global-title-indicator <0-15>'> + <params> + <param name='global-title-indicator' doc='Set Global Title Indicator' /> + <param name='<0-15>' doc='GTI' /> + </params> + </command> + <command id='translation-type <0-255>'> + <params> + <param name='translation-type' doc='Set Global Title Translation Type' /> + <param name='<0-255>' doc='TT' /> + </params> + </command> + <command id='numbering-plan-indicator <0-15>'> + <params> + <param name='numbering-plan-indicator' doc='Set Global Title Numbering Plan Indicator' /> + <param name='<0-15>' doc='NPI' /> + </params> + </command> + <command id='nature-of-address-indicator <0-127>'> + <params> + <param name='nature-of-address-indicator' doc='Set Global Title Nature of Address Indicator' /> + <param name='<0-127>' doc='NAI' /> + </params> + </command> + <command id='digits DIGITS'> + <params> + <param name='digits' doc='Set Global Title Digits' /> + <param name='DIGITS' doc='Number digits' /> + </params> + </command> + </node> +</vtydoc> \ No newline at end of file diff --git a/OsmoSTP/vty/stp_vty_reference.xml b/OsmoSTP/vty/stp_vty_reference.xml deleted file mode 100644 index a4c675e..0000000 --- a/OsmoSTP/vty/stp_vty_reference.xml +++ /dev/null @@ -1,2 +0,0 @@ -<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> -</vtydoc> -- To view, visit https://gerrit.osmocom.org/4791 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: Ica4b1c0172255ec2328562fdd8fac190e3ad448d Gerrit-PatchSet: 1 Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Owner: Harald Welte <laforge at gnumonks.org>