This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Vadim Yanitskiy gerrit-no-reply at lists.osmocom.orgReview at https://gerrit.osmocom.org/2160 osmo-bts-trx/l1_if.c: use channel combination III for TCH/H Currently the channel combination II is used for TCH/H, which allows only one lchan to be allocated. The reason is that it saves a bit of CPU by disabling UL burst detection on lchan 1. There is also the channel combination III, which allows to increase channel capacity, providing two lchans on a single TCH/H timeslot. Ideally we should implement some dynamic II <-> III switching depending on the network load level. But for now this change replaces the channel combination of TCH/H by III, until dynamic switching is implemented. Change-Id: I8fd4abb42c153fcd26bcfe22a2554b5c2d02d810 --- M src/osmo-bts-trx/l1_if.c 1 file changed, 1 insertion(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/60/2160/1 diff --git a/src/osmo-bts-trx/l1_if.c b/src/osmo-bts-trx/l1_if.c index abb16eb..d0c8afd 100644 --- a/src/osmo-bts-trx/l1_if.c +++ b/src/osmo-bts-trx/l1_if.c @@ -49,7 +49,7 @@ [GSM_PCHAN_CCCH] = 4, [GSM_PCHAN_CCCH_SDCCH4] = 5, [GSM_PCHAN_TCH_F] = 1, - [GSM_PCHAN_TCH_H] = 2, + [GSM_PCHAN_TCH_H] = 3, [GSM_PCHAN_SDCCH8_SACCH8C] = 7, [GSM_PCHAN_PDCH] = 13, /* [GSM_PCHAN_TCH_F_PDCH] not needed here, see trx_set_ts_as_pchan() */ -- To view, visit https://gerrit.osmocom.org/2160 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newchange Gerrit-Change-Id: I8fd4abb42c153fcd26bcfe22a2554b5c2d02d810 Gerrit-PatchSet: 1 Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Owner: Vadim Yanitskiy <axilirator at gmail.com>