[PATCH] osmo-bts[master]: VIRT-PHY: Added example configurations for openbsc and osmobts.

This is merely a historical archive of years 2008-2021, before the migration to mailman3.

A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.

Harald Welte gerrit-no-reply at lists.osmocom.org
Thu Jul 13 19:35:40 UTC 2017


Hello Jenkins Builder,

I'd like you to reexamine a change.  Please visit

    https://gerrit.osmocom.org/3243

to look at the new patch set (#5).

VIRT-PHY: Added example configurations for openbsc and osmobts.

Change-Id: I368d4a378e20028603b09825eee766abb9195774
---
M Makefile.am
A doc/examples/virtual/openbsc-virtual.cfg
A doc/examples/virtual/osmobts-virtual.cfg
3 files changed, 215 insertions(+), 0 deletions(-)


  git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/43/3243/5

diff --git a/Makefile.am b/Makefile.am
index 0f85151..69d0b93 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -13,6 +13,8 @@
 	contrib/sysmobts-calib/sysmobts-layer1.h \
 	doc/examples/sysmo/osmo-bts.cfg \
 	doc/examples/sysmobts-mgr.cfg \
+	doc/examples/virtual/openbsc-virtual.cfg \
+	doc/examples/virtual/osmobts-virtual.cfg \
 	README.md
 
 @RELMAKE@
diff --git a/doc/examples/virtual/openbsc-virtual.cfg b/doc/examples/virtual/openbsc-virtual.cfg
new file mode 100644
index 0000000..8044fa8
--- /dev/null
+++ b/doc/examples/virtual/openbsc-virtual.cfg
@@ -0,0 +1,151 @@
+!
+! OpenBSC (0.15.0.629-34f0-dirty) configuration saved from vty
+!!
+!
+log stderr
+  logging filter all 1
+  logging color 0
+  logging print category 1
+  logging timestamp 1
+  logging level all info
+  logging level rll notice
+  logging level cc notice
+  logging level mm debug
+  logging level rr notice
+  logging level rsl notice
+  logging level nm info
+  logging level mncc notice
+  logging level pag notice
+  logging level meas notice
+  logging level sccp notice
+  logging level msc notice
+  logging level mgcp notice
+  logging level ho notice
+  logging level db notice
+  logging level ref notice
+  logging level gprs debug
+  logging level ns info
+  logging level bssgp debug
+  logging level llc debug
+  logging level sndcp debug
+  logging level nat notice
+  logging level ctrl notice
+  logging level smpp debug
+  logging level filter debug
+  logging level ranap debug
+  logging level sua debug
+  logging level lglobal notice
+  logging level llapd notice
+  logging level linp notice
+  logging level lmux notice
+  logging level lmi notice
+  logging level lmib notice
+  logging level lsms notice
+  logging level lctrl notice
+  logging level lgtp notice
+  logging level lstats notice
+  logging level lgsup notice
+  logging level loap notice
+!
+stats interval 5
+!
+line vty
+ no login
+!
+e1_input
+ e1_line 0 driver ipa
+ e1_line 0 port 0
+ no e1_line 0 keepalive
+network
+ network country code 262
+ mobile network code 42
+ short name OpenBSC
+ long name OpenBSC
+ auth policy accept-all
+ authorized-regexp .*
+ location updating reject cause 13
+ encryption a5 0
+ neci 1
+ paging any use tch 0
+ rrlp mode ms-based
+ mm info 1
+ handover 0
+ handover window rxlev averaging 10
+ handover window rxqual averaging 1
+ handover window rxlev neighbor averaging 10
+ handover power budget interval 6
+ handover power budget hysteresis 3
+ handover maximum distance 9999
+ timer t3101 10
+ timer t3103 0
+ timer t3105 0
+ timer t3107 0
+ timer t3109 4
+ timer t3111 0
+ timer t3113 60
+ timer t3115 0
+ timer t3117 0
+ timer t3119 0
+ timer t3122 10
+ timer t3141 0
+ subscriber-keep-in-ram 0
+ bts 0
+  type sysmobts
+  band DCS1800
+  cell_identity 6969
+  location_area_code 1
+  base_station_id_code 63
+  ms max power 0
+  cell reselection hysteresis 4
+  rxlev access min 0
+  periodic location update 30
+  radio-link-timeout 32
+  channel allocator descending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  ip.access unit_id 6969 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode automatic
+  codec-support fr
+  gprs mode none
+  no force-combined-si
+  trx 0
+   rf_locked 0
+   arfcn 666
+   nominal power 0
+   max_power_red 0
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config SDCCH8
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config TCH/F
+    hopping enabled 0
+mncc-int
+ default-codec tch-f fr
+ default-codec tch-h hr
+nitb
+ subscriber-create-on-demand
+ subscriber-create-on-demand random 1 24
+ assign-tmsi
diff --git a/doc/examples/virtual/osmobts-virtual.cfg b/doc/examples/virtual/osmobts-virtual.cfg
new file mode 100644
index 0000000..5526e08
--- /dev/null
+++ b/doc/examples/virtual/osmobts-virtual.cfg
@@ -0,0 +1,62 @@
+!
+! OsmoBTS (0.4.0.216-bc49-dirty) configuration saved from vty
+!!
+!
+log stderr
+  logging filter all 0
+  logging color 0
+  logging print category 1
+  logging timestamp 0
+  logging level all everything
+  logging level rsl info
+  logging level oml info
+  logging level rll notice
+  logging level rr notice
+  logging level meas notice
+  logging level pag info
+  logging level l1c info
+  logging level l1p info
+  logging level dsp error
+  logging level pcu notice
+  logging level ho debug
+  logging level trx notice
+  logging level loop notice
+  logging level abis debug
+  logging level rtp notice
+  logging level sum error
+  logging level lglobal notice
+  logging level llapd notice
+  logging level linp notice
+  logging level lmux notice
+  logging level lmi notice
+  logging level lmib notice
+  logging level lsms notice
+  logging level lctrl notice
+  logging level lgtp notice
+  logging level lstats error
+!
+line vty
+ no login
+!
+e1_input
+ e1_line 0 driver ipa
+ e1_line 0 port 0
+ no e1_line 0 keepalive
+phy 0
+ instance 0
+bts 0
+ band DCS1800
+ ipa unit-id 6969 0
+ oml remote-ip 127.0.0.1
+ rtp jitter-buffer 100
+ paging queue-size 200
+ paging lifetime 0
+ uplink-power-target -75
+ min-qual-rach 50
+ min-qual-norm -5
+ trx 0
+  power-ramp max-initial 23000 mdBm
+  power-ramp step-size 2000 mdB
+  power-ramp step-interval 1
+  ms-power-control dsp
+  phy 0 instance 0

-- 
To view, visit https://gerrit.osmocom.org/3243
To unsubscribe, visit https://gerrit.osmocom.org/settings

Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I368d4a378e20028603b09825eee766abb9195774
Gerrit-PatchSet: 5
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Owner: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: BastusIII <sebastian.stumpf87 at googlemail.com>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder



More information about the gerrit-log mailing list