This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgHello Harald Welte, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/1497 to look at the new patch set (#3). Describe how to run multiple instances of osmo-nitb and osmo-bts Change-Id: I69adeef85adda6f08b31b7d176f51e16968c1435 --- M OsmoBTS/chapters/configuration.adoc M OsmoNITB/chapters/running.adoc 2 files changed, 71 insertions(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/97/1497/3 diff --git a/OsmoBTS/chapters/configuration.adoc b/OsmoBTS/chapters/configuration.adoc index b91d8ac..cca990b 100644 --- a/OsmoBTS/chapters/configuration.adoc +++ b/OsmoBTS/chapters/configuration.adoc @@ -179,3 +179,29 @@ De-activating power-ramping can be performed by setting the max-initial value to the nominal power. The default max-initial value is 23 dBm. + + +==== Running multiple instances + +It is possible to run multiple instances of `osmo-bts` on one and the same +machine, if the phy-interface is flexible enough to distinguish between +different phy hardware interfaces. + +Since usually a BTS instance runs in conjunction with a dedicated PCU instance, +the socket path between PCU and BTS has to be distinguished between the running +instances. It is possible to change the default socket path via VTY config: + +.Example: Personalize PCU socket path +---- +bts 0 + pcu-socket /tmp/pcu_bts_2 +---- + +It is also necessary to separate the VTY interfaces of the different instances. +The VTY can be bound to a free IP address from the loopback range: + +.Example: Binding VTY to a specific IP address +---- +line vty + bind 127.0.0.2 +---- diff --git a/OsmoNITB/chapters/running.adoc b/OsmoNITB/chapters/running.adoc index ae2c3fc..067a365 100644 --- a/OsmoNITB/chapters/running.adoc +++ b/OsmoNITB/chapters/running.adoc @@ -49,12 +49,56 @@ Enable the RTP proxy code inside OsmoNITB. This will force all voice RTP data to pass through OsmoNITB, rather than going directly from BTS to MGW, or BTS to BTS. -*-m, --mncc-sock*:: +*-M, --mncc-sock-path*:: Enable the MNCC socket for an external MNCC handler. See <<mncc>> for further information. +*-m, --mncc-sock*:: + Same as option -M (deprecated). *-C, --no-dbcounter*:: Disable the regular periodic synchronization of statistics counters to the database. *-r, --rf-ctl 'RFCTL'*:: Offer a Unix domain socket for RF control at the path/filename 'RFCTL' in the file system. + + +=== Multiple instances + +Running multiple instances of `osmo-nitb` is possible if all interfaces (VTY, +OML) are separated using the appropriate configuration options. The IP based +interfaces are binding to local host by default. In order to separate the +processes, the user has to bind those services to specific but different +IP addresses. + +The VTY and the control interface can be bound to IP addresses from the loopback +address range. + +.Example: Binding VTY and control interface to a specific ip-address +---- +line vty + bind 127.0.0.2 +ctrl + bind 127.0.0.2 +---- + +The OML interface also needs to be separated by binding it to different IP +addresses. Usually it is not possible to use addresses from the loopback +address range here since the OML interface needs to be reachable by an external +BTS. If only one ethernet interface is available, sub-devices with different IP +addresses can be created. + +.Example: Binding OML to a specific IP address +---- +e1_input + ipa bind 10.9.1.101 +---- + +NOTE: Depending on the application, it may be necessary to have different ARFCN, +MCC, MNC and network name settings. It might also be necessary to point to +different database and config files using command line options (see option +-l and -c). + +NOTE: If an external MNCC handler is used, the user has to assign a different +socket path to reach the osmo-nitb instance using commandline option -M. If +option -M is left out, the internal MNCC handler is used and no further +configuration is required. -- To view, visit https://gerrit.osmocom.org/1497 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newpatchset Gerrit-Change-Id: I69adeef85adda6f08b31b7d176f51e16968c1435 Gerrit-PatchSet: 3 Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Owner: dexter <pmaier at sysmocom.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de>