This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/1887 to look at the new patch set (#2). remove ChangeLog, it hasn't been updated since 2004 We have a detailed log in git instead. Change-Id: I6a7fe97995b5f65080a04423fee77030dea26b84 --- D ChangeLog M README M configure.ac M openggsn.spec.in 4 files changed, 4 insertions(+), 147 deletions(-) git pull ssh://gerrit.osmocom.org:29418/openggsn refs/changes/87/1887/2 diff --git a/ChangeLog b/ChangeLog deleted file mode 100644 index 3beba46..0000000 --- a/ChangeLog +++ /dev/null @@ -1,142 +0,0 @@ -2004-12-30: Jens Jakobsen <jj at openggsn.org> - Initial MAC OS X support - - Quality assurance and improved error logging - - QoS length bug fix. - -2004-09-11: Jens Jakobsen <jj at openggsn.org> - Added selection mode option to sgsnemu. - Added charging characteristics option to sgsnemu. - - Only include charging characteristics in create PDP context - request is if flags are set. (Thanks to Loic Bernable - <leto at vilya.org>). - - PPP PCO length bug fix. (Thanks to Loic Bernable - <leto at vilya.org>). - - IP pool hash table bugfix and improved logging. - - Improved configure.in and Makefile.am for compilation under - Solaris. New config.sub and config.guess. - -2004-04-28: Jens Jakobsen <jj at openggsn.org> - Improved Solaris support. OpenGGSN now correctly initializes - tun/tap driver under Solaris. As a consequence the ggsn network - interface IP address is set to the network address plus one. - - Added routing manipulation and IP address alias capability for - FreeBSD. - -2004-01-19: Jens Jakobsen <jj at openggsn.org> - Initial FreeBSD port (Thanks to Pavel Andreev <pavel.andreev at hp.com>). - - IMSI bugfix. The IMSI encoding used by create PDP context was - missing the leading '1111' to indicate that the 16'nd digit was - unused. (Thanks to Pavel Andreev <pavel.andreev at hp.com>). - - -2004-01-15: Jens Jakobsen <jj at openggsn.org> - Added iptables firewall script. - - -2004-01-14: Jens Jakobsen <jj at openggsn.org> - Changes to allow compilation under Solaris: u_int8_t changed to uint8_t - and tun api changed for sun platform (#ifdef). - - -2004-01-09: Jens Jakobsen <jj at openggsn.org> - Fixed bug which included NSAPI in GTPv0 create PDP context messages. - - -2003-11-10: Jens Jakobsen <jj at openggsn.org> - Added --net option for sgsnemu. Allow user to specify the network - address and mask of the local interface. - - Added --gtpversion option for sgsnemu. Allow user to specify which - GTP version to use. - - Added --nsapi option for sgsnemu. Allow user to specify which - NSAPI to use. - - Changed the functionality for multiple contexts. Previously - contexts were differentiated by nsapi. This limited the number of - contexts to 16. Now each context is established with a new imsi - and msisdn. - - -2003-10-22: Jens Jakobsen <jj at openggsn.org> - Support for GTP1. Currently without support for the secondary pdp - context activation procedure. - - sgsnemu will first attempt to use GTP1. If that fails it will - proceed with GTP0. - - Various gtplib API changes to allow support for GTP1. - - gtplib now listens to 3 separate UDP ports: GTP0, GTP1 control - plane and GTP1 user plane. A socket for each port has to be - included in the application select loop. - - gtplib now verifies that messages are valid for the particular - type of support node. As an example a received Create PDP Context - Request message is not allowed for an SGSN. - - Standards compliance document. - - -2003-07-07: Jens Jakobsen <jj at openggsn.org> - Added spec.in file for building binary RPM packages. Now openggsn - will install binaries, man pages as well as scripts. - - Added ggsn and sgsnemu man pages - - Added ggsn Sys V init script - - Added bootstrap script for autotools automation - - -2003-04-11: Jens Jakobsen <jj at openggsn.org> - Added -ggdb to gtp, sgsnemu and ggsn makefiles in order to include - debugging information. - - Added ippool.c and ippool.h to ggsn. This allows for generic - allocation of dynamic ip addresses based on a <net>/<mask> - description of ip address space. The same files are also used in - sgsnemu, but only for hashing IP addresses. At the same time the - corresponding functionality is removed from pdp.c. - - Added syserr.h and syserr.c to ggsn and sgsnemu. These files allow - writing to syslog with file name and line number. Later this - should also be introduced in gtp. - - Added support for DNS protocol configuration options in ggsn for - create context response. This allow the MS to setup DNS - configuration correctly. - - tun.c and tun.h have been updated to allow setting interface IP - addresses and routes by means of ioctl and netlink. This allow - sgsnemu to allocate an interface IP address for each context - established. - - -2003-01-29: Jens Jakobsen <jj at openggsn.org> - Added -L../gtp to sgsnemu and ggsn makefiles so that make will - work without an installed libgtp. - - Added sgsnemu check to check for valid pointer when deleting tun. - - Removed enabling of ip_forward = 1 from ggsn.c and sgsnemu. From a - security point of view it was not very good that openggsn - automatically enabled routing. - - Added ipup, ipdown and createif to sgsnemu/cmdline.ggo. Now - sgsnemu will set up default route and then execute ipup script - after tun device has been set up. After tun has been deleted the - ipdown script is executed. - - Added support for ping to sgsnemu. - - Added ipup and ipdown to ggsn/cmdline.ggo. - diff --git a/README b/README index 3d55259..9084d8f 100644 --- a/README +++ b/README @@ -257,9 +257,8 @@ 1. txt2html -pm -tf README > README.html 2. txt2html -pm -tf NEWS > NEWS.html - 3. txt2html -pm -tf ChangeLog > ChangeLog.html - 4. man2htm ggsn.8 > ggsn.html - 5. man2htm sgsnemu.8 > sgsnemu.html + 3. man2htm ggsn.8 > ggsn.html + 4. man2htm sgsnemu.8 > sgsnemu.html Installation from binary diff --git a/configure.ac b/configure.ac index 2422616..45ab22b 100644 --- a/configure.ac +++ b/configure.ac @@ -123,7 +123,7 @@ # check for getopt in standard library adl_FUNC_GETOPT_LONG -AM_INIT_AUTOMAKE() +AM_INIT_AUTOMAKE([foreign]) PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 0.6.4) PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 0.3.0) diff --git a/openggsn.spec.in b/openggsn.spec.in index 93934eb..3ee319e 100644 --- a/openggsn.spec.in +++ b/openggsn.spec.in @@ -63,7 +63,7 @@ %dir /var/lib/ggsn /var/lib/ggsn/gsn_restart -%doc AUTHORS ChangeLog COPYING INSTALL NEWS README +%doc AUTHORS COPYING INSTALL NEWS README %doc examples/ggsn.conf %doc examples/sgsnemu.conf %doc examples/ggsn.init -- To view, visit https://gerrit.osmocom.org/1887 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newpatchset Gerrit-Change-Id: I6a7fe97995b5f65080a04423fee77030dea26b84 Gerrit-PatchSet: 2 Gerrit-Project: openggsn Gerrit-Branch: master Gerrit-Owner: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder