This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
dexter gerrit-no-reply at lists.osmocom.orgHello Harald Welte, Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/5294 to look at the new patch set (#2). osmo-mgw: Add vty reference manual add missing vty reference manual for osmo-mgw Change-Id: If9d8cdcbbbf14b23e48af5b9ae1c56c2a38219a2 --- M Makefile A OsmoMGW/Makefile A OsmoMGW/osmomgw-vty-reference.xml A OsmoMGW/vty/mgw_vty_additions.xml A OsmoMGW/vty/mgw_vty_reference.xml 5 files changed, 1,783 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/94/5294/2 diff --git a/Makefile b/Makefile index 8261640..1fd0733 100644 --- a/Makefile +++ b/Makefile @@ -12,6 +12,7 @@ cd OsmoHLR; $(MAKE) cd OsmoSTP; $(MAKE) cd OsmocomBB; $(MAKE) + cd OsmoMGW; $(MAKE) clean: cd OsmoBTS; $(MAKE) clean @@ -27,6 +28,7 @@ cd OsmoHLR; $(MAKE) clean cd OsmoSTP; $(MAKE) clean cd OsmocomBB; $(MAKE) clean + cd OsmoMGW; $(MAKE) clean upload: cd OsmoBTS; $(MAKE) upload @@ -42,6 +44,7 @@ cd OsmoHLR; $(MAKE) upload cd OsmoSTP; $(MAKE) upload cd OsmocomBB; $(MAKE) upload + cd OsmoMGW; $(MAKE) upload check: cd OsmoBTS; $(MAKE) check @@ -54,6 +57,7 @@ # These don't use asciidoc, so they have no 'make check' target: #cd OsmoMGCP; $(MAKE) check #cd OsmoNAT; $(MAKE) check + #cd OsmoMGW; $(MAKE) check cd OsmoGSMTester; $(MAKE) check cd OsmoMSC; $(MAKE) check cd OsmoHLR; $(MAKE) check diff --git a/OsmoMGW/Makefile b/OsmoMGW/Makefile new file mode 100644 index 0000000..46c97e4 --- /dev/null +++ b/OsmoMGW/Makefile @@ -0,0 +1,6 @@ +TOPDIR = .. + +VTY_REFERENCE = osmomgw-vty-reference.xml +include $(TOPDIR)/build/Makefile.vty-reference.inc + +include $(TOPDIR)/build/Makefile.common.inc diff --git a/OsmoMGW/osmomgw-vty-reference.xml b/OsmoMGW/osmomgw-vty-reference.xml new file mode 100644 index 0000000..38cfd4f --- /dev/null +++ b/OsmoMGW/osmomgw-vty-reference.xml @@ -0,0 +1,38 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- + ex:ts=2:sw=42sts=2:et + -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- +--> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V5.0//EN" +"http://www.docbook.org/xml/5.0/dtd/docbook.dtd" [ +<!ENTITY chapter-vty SYSTEM "../common/chapters/vty.xml" > +<!ENTITY sections-vty SYSTEM "generated/docbook_vty.xml" > +]> + +<book> + <info> + <revhistory> + <revision> + <revnumber>v1</revnumber> + <date>12th December 2017</date> + <authorinitials>pm</authorinitials> + <revremark>Initial</revremark> + </revision> + </revhistory> + + <title>OsmoMGW VTY Reference</title> + + <copyright> + <year>2017</year> + </copyright> + + <legalnotice> + <para>This work is copyright by <orgname>sysmocom - s.f.m.c. GmbH</orgname>. All rights reserved. + </para> + </legalnotice> + </info> + + <!-- Main chapters--> + &chapter-vty; +</book> + diff --git a/OsmoMGW/vty/mgw_vty_additions.xml b/OsmoMGW/vty/mgw_vty_additions.xml new file mode 100644 index 0000000..a4c675e --- /dev/null +++ b/OsmoMGW/vty/mgw_vty_additions.xml @@ -0,0 +1,2 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> +</vtydoc> diff --git a/OsmoMGW/vty/mgw_vty_reference.xml b/OsmoMGW/vty/mgw_vty_reference.xml new file mode 100644 index 0000000..28eba81 --- /dev/null +++ b/OsmoMGW/vty/mgw_vty_reference.xml @@ -0,0 +1,1733 @@ +<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'> + <node id='Password'> + </node> + <node id='_1'> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Turn on privileged mode command' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rtp' doc='RTP stream handling' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show stats'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + </params> + </command> + <command id='show stats level (global|peer|subscriber)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Show global groups only' /> + <param name='peer' doc='Show global and network peer related groups' /> + <param name='subscriber' doc='Show global, peer, and subscriber groups' /> + </params> + </command> + <command id='show asciidoc counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='asciidoc' doc='Asciidoc generation' /> + <param name='counters' doc='Generate table of all registered counters' /> + </params> + </command> + <command id='show mgcp [stats]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='mgcp' doc='Display information about the MGCP Media Gateway' /> + <param name='[stats]' doc='Include Statistics' /> + </params> + </command> + </node> + <node id='Password_2'> + </node> + <node id='_2'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Turn off privileged mode command' /> + </params> + </command> + <command id='configure terminal'> + <params> + <param name='configure' doc='Configuration from vty interface' /> + <param name='terminal' doc='Configuration terminal' /> + </params> + </command> + <command id='copy running-config startup-config'> + <params> + <param name='copy' doc='Copy configuration' /> + <param name='running-config' doc='Copy running config to... ' /> + <param name='startup-config' doc='Copy running config to startup config (same as write file)' /> + </params> + </command> + <command id='show startup-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='startup-config' doc='Contentes of startup configuration' /> + </params> + </command> + <command id='show version'> + <params> + <param name='show' doc='Show running system information' /> + <param name='version' doc='Displays program version' /> + </params> + </command> + <command id='show online-help'> + <params> + <param name='show' doc='Show running system information' /> + <param name='online-help' doc='Online help' /> + </params> + </command> + <command id='terminal length <0-512>'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='length' doc='Set number of lines on a screen' /> + <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' /> + </params> + </command> + <command id='terminal no length'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='length' doc='Set number of lines on a screen' /> + </params> + </command> + <command id='echo .MESSAGE'> + <params> + <param name='echo' doc='Echo a message back to the vty' /> + <param name='.MESSAGE' doc='The message to echo' /> + </params> + </command> + <command id='who'> + <params> + <param name='who' doc='Display who is on vty' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='terminal monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='terminal no monitor'> + <params> + <param name='terminal' doc='Set terminal line parameters' /> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='monitor' doc='Copy debug output to the current terminal line' /> + </params> + </command> + <command id='logging enable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='enable' doc='Enables logging to this vty' /> + </params> + </command> + <command id='logging disable'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='disable' doc='Disables logging to this vty' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging set-log-mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set-log-mask' doc='Set the logmask of this logging target' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging set log mask MASK'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='set' doc='Decide which categories to output.' /> + <param name='log' doc='Log commands' /> + <param name='mask' doc='Mask commands' /> + <param name='MASK' doc='The logmask to use' /> + </params> + </command> + <command id='logging level (all|rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rtp' doc='RTP stream handling' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + <command id='show logging vty'> + <params> + <param name='show' doc='Show running system information' /> + <param name='logging' doc='Show current logging configuration' /> + <param name='vty' doc='Show current logging configuration for this vty' /> + </params> + </command> + <command id='show alarms'> + <params> + <param name='show' doc='Show running system information' /> + <param name='alarms' doc='Show current logging configuration' /> + </params> + </command> + <command id='show stats'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + </params> + </command> + <command id='show stats level (global|peer|subscriber)'> + <params> + <param name='show' doc='Show running system information' /> + <param name='stats' doc='Show statistical values' /> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Show global groups only' /> + <param name='peer' doc='Show global and network peer related groups' /> + <param name='subscriber' doc='Show global, peer, and subscriber groups' /> + </params> + </command> + <command id='show asciidoc counters'> + <params> + <param name='show' doc='Show running system information' /> + <param name='asciidoc' doc='Asciidoc generation' /> + <param name='counters' doc='Generate table of all registered counters' /> + </params> + </command> + <command id='show mgcp [stats]'> + <params> + <param name='show' doc='Show running system information' /> + <param name='mgcp' doc='Display information about the MGCP Media Gateway' /> + <param name='[stats]' doc='Include Statistics' /> + </params> + </command> + <command id='loop-endpoint <0-64> NAME (0|1)'> + <params> + <param name='loop-endpoint' doc='Loop a given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NAME' doc='The name in hex of the endpoint' /> + <param name='0' doc='Disable the loop' /> + <param name='1' doc='Enable the loop' /> + </params> + </command> + <command id='tap-rtp <0-64> ENDPOINT CONN (in|out) A.B.C.D <0-65534>'> + <params> + <param name='tap-rtp' doc='Forward data on endpoint to a different system' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='ENDPOINT' doc='The endpoint in hex' /> + <param name='CONN' doc='The connection id in hex' /> + <param name='in' doc='Forward incoming data' /> + <param name='out' doc='Forward leaving data' /> + <param name='A.B.C.D' doc='destination IP of the data' /> + <param name='<0-65534>' doc='destination port' /> + </params> + </command> + <command id='free-endpoint <0-64> NUMBER'> + <params> + <param name='free-endpoint' doc='Free the given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NUMBER' doc='Endpoint number in hex.' /> + </params> + </command> + <command id='reset-endpoint <0-64> NUMBER'> + <params> + <param name='reset-endpoint' doc='Reset the given endpoint' /> + <param name='<0-64>' doc='Trunk number' /> + <param name='NUMBER' doc='Endpoint number in hex.' /> + </params> + </command> + <command id='reset-all-endpoints'> + <params> + <param name='reset-all-endpoints' doc='Reset all endpoints' /> + </params> + </command> + </node> + <node id='config'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='hostname WORD'> + <params> + <param name='hostname' doc='Set system's network name' /> + <param name='WORD' doc='This system's network name' /> + </params> + </command> + <command id='no hostname [HOSTNAME]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='hostname' doc='Reset system's network name' /> + <param name='[HOSTNAME]' doc='Host name of this router' /> + </params> + </command> + <command id='password (8|) WORD'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN line password string' /> + </params> + </command> + <command id='password LINE'> + <params> + <param name='password' doc='Assign the terminal connection password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' /> + </params> + </command> + <command id='enable password (8|) WORD'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='8' doc='Specifies a HIDDEN password will follow' /> + <param name='' doc='dummy string ' /> + <param name='WORD' doc='The HIDDEN 'enable' password string' /> + </params> + </command> + <command id='enable password LINE'> + <params> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' /> + </params> + </command> + <command id='no enable password'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='enable' doc='Modify enable password parameters' /> + <param name='password' doc='Assign the privileged level password' /> + </params> + </command> + <command id='banner motd default'> + <params> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + <param name='default' doc='Default string' /> + </params> + </command> + <command id='banner motd file [FILE]'> + <params> + <param name='banner' doc='Set banner' /> + <param name='motd' doc='Banner for motd' /> + <param name='file' doc='Banner from a file' /> + <param name='[FILE]' doc='Filename' /> + </params> + </command> + <command id='no banner motd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='banner' doc='Set banner string' /> + <param name='motd' doc='Strings for motd' /> + </params> + </command> + <command id='service terminal-length <0-512>'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='no service terminal-length [<0-512>]'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='terminal-length' doc='System wide terminal length configuration' /> + <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' /> + </params> + </command> + <command id='line vty'> + <params> + <param name='line' doc='Configure a terminal line' /> + <param name='vty' doc='Virtual terminal' /> + </params> + </command> + <command id='service advanced-vty'> + <params> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='no service advanced-vty'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='service' doc='Set up miscellaneous service' /> + <param name='advanced-vty' doc='Enable advanced mode vty interface' /> + </params> + </command> + <command id='show history'> + <params> + <param name='show' doc='Show running system information' /> + <param name='history' doc='Display the session command history' /> + </params> + </command> + <command id='log stderr'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='no log stderr'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='stderr' doc='Logging via STDERR of the process' /> + </params> + </command> + <command id='log file .FILENAME'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='no log file .FILENAME'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='file' doc='Logging to text file' /> + <param name='.FILENAME' doc='Filename' /> + </params> + </command> + <command id='log alarms <2-32700>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + <param name='<2-32700>' doc='Maximum number of messages to log' /> + </params> + </command> + <command id='no log alarms'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='alarms' doc='Logging alarms to osmo_strrb' /> + </params> + </command> + <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='authpriv' doc='Security/authorization messages facility' /> + <param name='cron' doc='Clock daemon (cron/at) facility' /> + <param name='daemon' doc='General system daemon facility' /> + <param name='ftp' doc='Ftp daemon facility' /> + <param name='lpr' doc='Line printer facility' /> + <param name='mail' doc='Mail facility' /> + <param name='news' doc='News facility' /> + <param name='user' doc='Generic facility' /> + <param name='uucp' doc='UUCP facility' /> + </params> + </command> + <command id='log syslog local <0-7>'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + <param name='local' doc='Syslog LOCAL facility' /> + <param name='<0-7>' doc='Local facility number' /> + </params> + </command> + <command id='no log syslog'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='log' doc='Configure logging sub-system' /> + <param name='syslog' doc='Logging via syslog' /> + </params> + </command> + <command id='log gsmtap [HOSTNAME]'> + <params> + <param name='log' doc='Configure logging sub-system' /> + <param name='gsmtap' doc='Logging via GSMTAP' /> + <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' /> + </params> + </command> + <command id='stats reporter statsd'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='statsd' doc='Report to a STATSD server' /> + </params> + </command> + <command id='no stats reporter statsd'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='statsd' doc='Report to a STATSD server' /> + </params> + </command> + <command id='stats reporter log'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='log' doc='Report to the logger' /> + </params> + </command> + <command id='no stats reporter log'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='stats' doc='Configure stats sub-system' /> + <param name='reporter' doc='Configure a stats reporter' /> + <param name='log' doc='Report to the logger' /> + </params> + </command> + <command id='stats interval <1-65535>'> + <params> + <param name='stats' doc='Configure stats sub-system' /> + <param name='interval' doc='Set the reporting interval' /> + <param name='<1-65535>' doc='Interval in seconds' /> + </params> + </command> + <command id='mgcp'> + <params> + <param name='mgcp' doc='Configure the MGCP' /> + </params> + </command> + </node> + <node id='config-log'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='logging filter all (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='filter' doc='Filter log messages' /> + <param name='all' doc='Do you want to log all messages?' /> + <param name='0' doc='Only print messages matched by other filters' /> + <param name='1' doc='Bypass filter and print all messages' /> + </params> + </command> + <command id='logging color (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='color' doc='Configure color-printing for log messages' /> + <param name='0' doc='Don't use color for printing messages' /> + <param name='1' doc='Use color for printing messages' /> + </params> + </command> + <command id='logging timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp' /> + </params> + </command> + <command id='logging print extended-timestamp (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='extended-timestamp' doc='Configure log message timestamping' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' /> + </params> + </command> + <command id='logging print category (0|1)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='print' doc='Log output settings' /> + <param name='category' doc='Configure log message' /> + <param name='0' doc='Don't prefix each log message' /> + <param name='1' doc='Prefix each log message with category/subsystem name' /> + </params> + </command> + <command id='logging level (all|rtp|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp) (everything|debug|info|notice|error|fatal)'> + <params> + <param name='logging' doc='Configure log message to this terminal' /> + <param name='level' doc='Set the log level for a specified category' /> + <param name='all' doc='Global setting for all subsystems' /> + <param name='rtp' doc='RTP stream handling' /> + <param name='lglobal' doc='Library-internal global log family' /> + <param name='llapd' doc='LAPD in libosmogsm' /> + <param name='linp' doc='A-bis Intput Subsystem' /> + <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' /> + <param name='lmi' doc='A-bis Input Driver for Signalling' /> + <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' /> + <param name='lsms' doc='Layer3 Short Message Service (SMS)' /> + <param name='lctrl' doc='Control Interface' /> + <param name='lgtp' doc='GPRS GTP library' /> + <param name='lstats' doc='Statistics messages and logging' /> + <param name='lgsup' doc='Generic Subscriber Update Protocol' /> + <param name='loap' doc='Osmocom Authentication Protocol' /> + <param name='lss7' doc='libosmo-sigtran Signalling System 7' /> + <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' /> + <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' /> + <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' /> + <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' /> + <param name='everything' doc='Don't use. It doesn't log anything' /> + <param name='debug' doc='Log debug messages and higher levels' /> + <param name='info' doc='Log informational messages and higher levels' /> + <param name='notice' doc='Log noticeable messages and higher levels' /> + <param name='error' doc='Log error messages and higher levels' /> + <param name='fatal' doc='Log only fatal messages' /> + </params> + </command> + </node> + <node id='config-stats'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='local-ip ADDR'> + <params> + <param name='local-ip' doc='Set the IP address to which we bind locally' /> + <param name='ADDR' doc='IP Address' /> + </params> + </command> + <command id='no local-ip'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='local-ip' doc='Set the IP address to which we bind locally' /> + </params> + </command> + <command id='remote-ip ADDR'> + <params> + <param name='remote-ip' doc='Set the remote IP address to which we connect' /> + <param name='ADDR' doc='IP Address' /> + </params> + </command> + <command id='remote-port <1-65535>'> + <params> + <param name='remote-port' doc='Set the remote port to which we connect' /> + <param name='<1-65535>' doc='Remote port number' /> + </params> + </command> + <command id='mtu <100-65535>'> + <params> + <param name='mtu' doc='Set the maximum packet size' /> + <param name='<100-65535>' doc='Size in byte' /> + </params> + </command> + <command id='no mtu'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='mtu' doc='Set the maximum packet size' /> + </params> + </command> + <command id='prefix PREFIX'> + <params> + <param name='prefix' doc='Set the item name prefix' /> + <param name='PREFIX' doc='The prefix string' /> + </params> + </command> + <command id='no prefix'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='prefix' doc='Set the item name prefix' /> + </params> + </command> + <command id='level (global|peer|subscriber)'> + <params> + <param name='level' doc='Set the maximum group level' /> + <param name='global' doc='Report global groups only' /> + <param name='peer' doc='Report global and network peer related groups' /> + <param name='subscriber' doc='Report global, peer, and subscriber groups' /> + </params> + </command> + <command id='enable'> + <params> + <param name='enable' doc='Enable the reporter' /> + </params> + </command> + <command id='disable'> + <params> + <param name='disable' doc='Disable the reporter' /> + </params> + </command> + </node> + <node id='config-line'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='login'> + <params> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='no login'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='login' doc='Enable password checking' /> + </params> + </command> + <command id='bind A.B.C.D'> + <params> + <param name='bind' doc='Accept VTY telnet connections on local interface' /> + <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' /> + </params> + </command> + </node> + <node id='config-mgcp'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='local ip A.B.C.D'> + <params> + <param name='local' doc='Local options for the SDP record' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to use in SDP record' /> + </params> + </command> + <command id='bind ip A.B.C.D'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to bind to' /> + </params> + </command> + <command id='bind port <0-65534>'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='port' doc='Port information' /> + <param name='<0-65534>' doc='UDP port to listen for MGCP messages' /> + </params> + </command> + <command id='bind early (0|1)'> + <params> + <param name='bind' doc='Listen/Bind related socket option' /> + <param name='early' doc='Bind local ports on start up' /> + <param name='0' doc='Bind on demand' /> + <param name='1' doc='Bind on startup' /> + </params> + </command> + <command id='rtp net-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='net-range' doc='Range of ports to use for the NET side' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp port-range <0-65534> <0-65534>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='port-range' doc='Range of ports to use for the NET side' /> + <param name='<0-65534>' doc='Start of the range of ports' /> + <param name='<0-65534>' doc='End of the range of ports' /> + </params> + </command> + <command id='rtp net-bind-ip A.B.C.D'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='net-bind-ip' doc='Bind endpoints facing the Network' /> + <param name='A.B.C.D' doc='Address to bind to' /> + </params> + </command> + <command id='rtp bind-ip A.B.C.D'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='bind-ip' doc='Bind endpoints facing the Network' /> + <param name='A.B.C.D' doc='Address to bind to' /> + </params> + </command> + <command id='no rtp net-bind-ip'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='net-bind-ip' doc='Bind endpoints facing the Network' /> + </params> + </command> + <command id='no rtp bind-ip'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='bind-ip' doc='Bind endpoints facing the Network' /> + </params> + </command> + <command id='rtp ip-probing'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-probing' doc='automatic rtp bind ip selection' /> + </params> + </command> + <command id='no rtp ip-probing'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-probing' doc='no automatic rtp bind ip selection' /> + </params> + </command> + <command id='rtp ip-dscp <0-255>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-dscp' doc='Apply IP_TOS to the audio stream (including Osmux)' /> + <param name='<0-255>' doc='The DSCP value' /> + </params> + </command> + <command id='rtp ip-tos <0-255>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='ip-tos' doc='Apply IP_TOS to the audio stream' /> + <param name='<0-255>' doc='The DSCP value' /> + </params> + </command> + <command id='rtp force-ptime (10|20|40)'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='force-ptime' doc='Force a fixed ptime for packets sentThe required ptime (packet duration) in ms' /> + <param name='10' doc='10 ms' /> + <param name='20' doc='20 ms' /> + <param name='40' doc='40 ms' /> + </params> + </command> + <command id='no rtp force-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='force-ptime' doc='Force a fixed ptime for packets sent' /> + </params> + </command> + <command id='rtp keep-alive <1-120>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='<1-120>' doc='Keep alive interval in secs' /> + </params> + </command> + <command id='rtp keep-alive once'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='once' doc='Send dummy packet only once after CRCX/MDCX' /> + </params> + </command> + <command id='no rtp keep-alive'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + </params> + </command> + <command id='call-agent ip A.B.C.D'> + <params> + <param name='call-agent' doc='Callagent information' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the callagent' /> + </params> + </command> + <command id='call agent ip A.B.C.D'> + <params> + <param name='call' doc='Callagent information' /> + <param name='agent' doc='Callagent information' /> + <param name='ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address of the callagent' /> + </params> + </command> + <command id='sdp audio-payload number <0-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<0-255>' doc='Payload number' /> + </params> + </command> + <command id='sdp audio-payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='name' doc='Name' /> + <param name='NAME' doc='Payload name' /> + </params> + </command> + <command id='sdp audio payload number <0-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<0-255>' doc='Payload number' /> + </params> + </command> + <command id='sdp audio payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='name' doc='Name' /> + <param name='NAME' doc='Payload name' /> + </params> + </command> + <command id='loop (0|1)'> + <params> + <param name='loop' doc='Loop audio for all endpoints on main trunk' /> + <param name='0' doc='Don't Loop' /> + <param name='1' doc='Loop' /> + </params> + </command> + <command id='force-realloc (0|1)'> + <params> + <param name='force-realloc' doc='Force endpoint reallocation when the endpoint is still seized' /> + <param name='0' doc='Don't force reallocation' /> + <param name='1' doc='force reallocation' /> + </params> + </command> + <command id='rtp-accept-all (0|1)'> + <params> + <param name='rtp-accept-all' doc='Accept all RTP packets, even when the originating IP/Port does not match' /> + <param name='0' doc='enable filter' /> + <param name='1' doc='disable filter' /> + </params> + </command> + <command id='number endpoints <0-65534>'> + <params> + <param name='number' doc='Number options' /> + <param name='endpoints' doc='Endpoints available' /> + <param name='<0-65534>' doc='Number endpoints' /> + </params> + </command> + <command id='rtcp-omit'> + <params> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='no rtcp-omit'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='rtp-patch ssrc'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='no rtp-patch ssrc'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='rtp-patch timestamp'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch timestamp'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + </params> + </command> + <command id='sdp audio fmtp-extra .NAME'> + <params> + <param name='sdp' doc='Add extra fmtp for the SDP file' /> + <param name='audio' doc='Audio' /> + <param name='fmtp-extra' doc='Fmtp-extra' /> + <param name='.NAME' doc='Extra Information' /> + </params> + </command> + <command id='sdp audio-payload send-ptime'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='no sdp audio-payload send-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='sdp audio-payload send-name'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-name' doc='Send SDP rtpmap with the audio name' /> + </params> + </command> + <command id='no sdp audio-payload send-name'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-name' doc='Send SDP rtpmap with the audio name' /> + </params> + </command> + <command id='osmux (on|off|only)'> + <params> + <param name='osmux' doc='RTP multiplexing' /> + <param name='on' doc='Enable OSMUX' /> + <param name='off' doc='Disable OSMUX' /> + <param name='only' doc='Only use OSMUX' /> + </params> + </command> + <command id='osmux bind-ip A.B.C.D'> + <params> + <param name='osmux' doc='RTP multiplexing' /> + <param name='bind-ip' doc='IP information' /> + <param name='A.B.C.D' doc='IPv4 Address to bind to' /> + </params> + </command> + <command id='osmux batch-factor <1-8>'> + <params> + <param name='osmux' doc='RTP multiplexing' /> + <param name='batch-factor' doc='Batching factor' /> + <param name='<1-8>' doc='Number of messages in the batch' /> + </params> + </command> + <command id='osmux batch-size <1-65535>'> + <params> + <param name='osmux' doc='RTP multiplexing' /> + <param name='batch-size' doc='batch size' /> + <param name='<1-65535>' doc='Batch size in bytes' /> + </params> + </command> + <command id='osmux port <1-65535>'> + <params> + <param name='osmux' doc='RTP multiplexing' /> + <param name='port' doc='port' /> + <param name='<1-65535>' doc='UDP port' /> + </params> + </command> + <command id='osmux dummy (on|off)'> + <params> + <param name='osmux' doc='RTP multiplexing' /> + <param name='dummy' doc='Dummy padding' /> + <param name='on' doc='Enable dummy padding' /> + <param name='off' doc='Disable dummy padding' /> + </params> + </command> + <command id='allow-transcoding'> + <params> + <param name='allow-transcoding' doc='Allow transcoding' /> + </params> + </command> + <command id='no allow-transcoding'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='allow-transcoding' doc='Allow transcoding' /> + </params> + </command> + <command id='trunk <1-64>'> + <params> + <param name='trunk' doc='Configure a SS7 trunk' /> + <param name='<1-64>' doc='Trunk Nr' /> + </params> + </command> + </node> + <node id='config-mgcp-trunk'> + <command id='help'> + <params> + <param name='help' doc='Description of the interactive help system' /> + </params> + </command> + <command id='list'> + <params> + <param name='list' doc='Print command list' /> + </params> + </command> + <command id='write terminal'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='terminal' doc='Write to terminal' /> + </params> + </command> + <command id='write file'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='file' doc='Write to configuration file' /> + </params> + </command> + <command id='write memory'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + <param name='memory' doc='Write configuration to the file (same as write file)' /> + </params> + </command> + <command id='write'> + <params> + <param name='write' doc='Write running configuration to memory, network, or terminal' /> + </params> + </command> + <command id='show running-config'> + <params> + <param name='show' doc='Show running system information' /> + <param name='running-config' doc='running configuration' /> + </params> + </command> + <command id='exit'> + <params> + <param name='exit' doc='Exit current mode and down to previous mode' /> + </params> + </command> + <command id='end'> + <params> + <param name='end' doc='End current mode and change to enable mode.' /> + </params> + </command> + <command id='rtp keep-alive <1-120>'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='<1-120>' doc='Keep-alive interval in secs' /> + </params> + </command> + <command id='rtp keep-alive once'> + <params> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + <param name='once' doc='Send dummy packet only once after CRCX/MDCX' /> + </params> + </command> + <command id='no rtp keep-alive'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp' doc='RTP configuration' /> + <param name='keep-alive' doc='Send dummy UDP packet to net RTP destination' /> + </params> + </command> + <command id='sdp audio-payload number <0-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<0-255>' doc='Payload Number' /> + </params> + </command> + <command id='sdp audio-payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='name' doc='Payload' /> + <param name='NAME' doc='Payload Name' /> + </params> + </command> + <command id='sdp audio payload number <0-255>'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='number' doc='Number' /> + <param name='<0-255>' doc='Payload Number' /> + </params> + </command> + <command id='sdp audio payload name NAME'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio' doc='Audio payload options' /> + <param name='payload' doc='Audio payload options' /> + <param name='name' doc='Payload' /> + <param name='NAME' doc='Payload Name' /> + </params> + </command> + <command id='loop (0|1)'> + <params> + <param name='loop' doc='Loop audio for all endpoints on this trunk' /> + <param name='0' doc='Don't Loop' /> + <param name='1' doc='Loop' /> + </params> + </command> + <command id='rtcp-omit'> + <params> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='no rtcp-omit'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtcp-omit' doc='Drop RTCP packets in both directions' /> + </params> + </command> + <command id='rtp-patch ssrc'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='no rtp-patch ssrc'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='ssrc' doc='Force a fixed SSRC' /> + </params> + </command> + <command id='rtp-patch timestamp'> + <params> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch timestamp'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + <param name='timestamp' doc='Adjust RTP timestamp' /> + </params> + </command> + <command id='no rtp-patch'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='rtp-patch' doc='Modify RTP packet header in both directions' /> + </params> + </command> + <command id='sdp audio fmtp-extra .NAME'> + <params> + <param name='sdp' doc='Add extra fmtp for the SDP file' /> + <param name='audio' doc='Audio' /> + <param name='fmtp-extra' doc='Fmtp-extra' /> + <param name='.NAME' doc='Extra Information' /> + </params> + </command> + <command id='sdp audio-payload send-ptime'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='no sdp audio-payload send-ptime'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-ptime' doc='Send SDP ptime (packet duration) attribute' /> + </params> + </command> + <command id='sdp audio-payload send-name'> + <params> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-name' doc='Send SDP rtpmap with the audio name' /> + </params> + </command> + <command id='no sdp audio-payload send-name'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='sdp' doc='SDP File related options' /> + <param name='audio-payload' doc='Audio payload options' /> + <param name='send-name' doc='Send SDP rtpmap with the audio name' /> + </params> + </command> + <command id='allow-transcoding'> + <params> + <param name='allow-transcoding' doc='Allow transcoding' /> + </params> + </command> + <command id='no allow-transcoding'> + <params> + <param name='no' doc='Negate a command or set its defaults' /> + <param name='allow-transcoding' doc='Allow transcoding' /> + </params> + </command> + </node> +</vtydoc> -- To view, visit https://gerrit.osmocom.org/5294 To unsubscribe, visit https://gerrit.osmocom.org/settings Gerrit-MessageType: newpatchset Gerrit-Change-Id: If9d8cdcbbbf14b23e48af5b9ae1c56c2a38219a2 Gerrit-PatchSet: 2 Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Owner: dexter <pmaier at sysmocom.de> Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org> Gerrit-Reviewer: Jenkins Builder