This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Harald Welte gerrit-no-reply at lists.osmocom.orgHarald Welte has submitted this change and it was merged.
Change subject: Bump version: 0.5.0 → 0.6.0
......................................................................
Bump version: 0.5.0 → 0.6.0
Change-Id: I613d09ae0f9f0aa67be1dc6015da1fb9314110fd
---
M debian/changelog
1 file changed, 482 insertions(+), 1 deletion(-)
Approvals:
Harald Welte: Looks good to me, approved
Jenkins Builder: Verified
diff --git a/debian/changelog b/debian/changelog
index 5c2d203..61c46c6 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,485 @@
-osmo-bts (0.5.0) UNRELEASED; urgency=medium
+osmo-bts (0.6.0) unstable; urgency=medium
+
+ [ Holger Hans Peter Freyther ]
+ * Initial release.
+ * misc: Ignore files generated by a debian packaging build
+ * jenkins: Add the build script from jenkins here
+ * jenkins: Add the build script from jenkins here
+ * sysmobts: Add the barebox boot state reservation
+ * sysmobts: Fix eeprom padding before gpg key
+ * ci/spatch: Remove the "static" analysis handling
+ * oct: Attempt to enable the Octphy for the osmo-bts-oct build
+ * debian: Use the header files installed by openbsc-dev
+ * build: Do not require more headers from OpenBSC
+ * sysmobts: Make reservation for mode/netmask/ip and suc
+ * sysmobts: Store a simple network config in the EEPROM as well
+
+ [ Max ]
+ * Ensure TRX invariant
+ * Use libosmocore function for uplink measurements
+ * Fix debug output
+ * Fix RTP timestamps in case of DTX
+ * Add DTXd support for sysmoBTS and LC15
+ * Use libosmocodec for AMR RTP
+ * octphy: Use the app. info. defaults as base
+ * Fix debug output
+ * DTXd: store/repeat last SID
+ * DTXd: store/repeat last SID
+ * DTXu: mark beginning of speech burst in RTP
+ * Fix OML activation
+ * TRX: Add vty command to power on/off transceiver
+ * TRX: add configuration example
+ * Add .gitreview
+ * DTX: add support for AMR/HR
+ * Move copy-pasted code into common part
+ * Use libosmocodec functions for AMR
+ * Use error values instead of number for RSL error
+ * Clarify logging message
+ * Make get_lchan_by_chan_nr globally available
+ * DTXu: move copy-pasted code to common part
+ * Remove duplicated nibble shift code
+ * TRX: add Uplink DTX support for FR/HR
+ * Mark array as static const
+ * sysmobts: dump PRACH and PTCCH parameters
+ * Activate PTCCH UL
+ * Fix dsp tracing at phy config
+ * octphy: fix build
+ * Fill measurements data for L1SAP
+ * sysmo: ts_connect: log channel combination name instead of number
+ * DTX: fix last SID saving
+ * DTX: fix SID repeat scheduling
+ * DTX: fix SID logic
+ * lc15, sysmo: Use SID_FIRST_P1 to initiate DTX
+ * DTX: check Marker bit to send ONSET to L1
+ * DTX: remove misleading comment
+ * LC15: Clarify msgb ownership / fix memory leaks
+ * DTX: move scheduling check inside repeat_last_sid
+ * DTX: further AMR SID cache fixes (lc15, sysmo)
+ * DTX: move ONSET detection into separate function
+ * DTX: send AMR voice alongside with ONSET
+ * DTX: fix conversion from fn to ms
+ * Move copy-pasted array into shared header
+ * DTX DL: use FSM for AMR
+ * TRX: fix building with latest DTX changes
+ * DTX: fix array size calculation
+ * DTX AMR - fix buffer length check
+ * Replace magic number with define
+ * Fix lc15 build
+ * Extend RTP RX callback parameters
+ * DTX HR - fix array size calculation
+ * Fix DTX DL AMR SIDscheduling logic
+ * Add tools to check DTX operation
+ * DTX DL: split ONSET state handling
+ * Remove obsolete define
+ * DTX DL: add AMR HR support to scheduling check
+ * DTX fix ONSET handling
+ * dtx_check.gawk: Fix false-positives in DTX check
+ * Fix tests linking with libosmocodec
+ * DTX DL: tighten check for enabled operation
+ * DTX: wrap FSM signal dispatching
+ * Add libosmocodec for octphy build
+ * dtx_check.gawk: add check for repetitive SID FIRST
+ * Remove duplicated code
+ * Replace link_id constant with define
+ * DTX DL AMR: rewrite FSM recursion
+ * Remove duplicated code
+ * Fix AGCH/PCH proportional allocation
+ * TRX: prevent segfault upon phy init
+ * DTX: add explicit check if DTX enabled
+ * Save RTP metadata in Control Buffer
+ * osmo-bts-trx: fix lchan deactivation
+ * DTX: fix TS adjustment for ONSET
+ * Optionally use adaptive RTP jitter buffering
+ * Integrate Debian packaging changes
+ * DTX AMR HR: fix inhibition
+ * Add copyright for .deb packages
+ * Move code to libosmocore
+ * Log socket path on error
+ * Add Abis OML failure event reporting
+ * Alarm on various errors
+ * Remove obsolete define TLVP_PRES_LEN
+ * scheduler: log lchan on which prim error occured
+ * deb: use gsm_data_shared.* from openbsc-dev
+ * OML: internalize failure reporting
+ * Add ctrl command to send OML alert
+ * Fix typo in TCH/H interleaving table
+ * Use oml-alert CTRL command for temp report
+ * Remove code duplication
+ * Handle ctrl cmd allocation failures
+ * Check for suitable lchan type when detecting HO
+ * osmo-bts-trx: fix scheduling of broken frames
+ * Sync protocol with OsmoPCU
+ * vty: reduce code duplication
+ * Handle TXT indication from OsmoPCU
+ * Add MS TO to RSL measurements
+ * Signal to BSC when PCU disconnects
+ * Prepare for extended SI2quater support
+ * Set BTS variant while initializing BTS model
+ * Prepare for BTS attribute reporting via OML
+ * osmo-bts-trx: use libosmocoding
+ * Remove redundant test
+ * Implement basic Get Attribute responder
+ * Add version to phy_instance
+ * OML: fix Coverity-reported issues
+ * Re-add version to phy_instance
+ * Use systemd template specifiers
+ * Place *-mgr config examples according to BTS model
+ * lc15: add example systemd service file
+ * Extend Get Attribute responder
+ * Set and report BTS features
+ * Cleanup SI scheduling
+ * RSL: receive and send multiple SI2q messages
+ * RSL: check for abnormal SI2q values
+ * lc15bts-mgr: use extended config file example
+ * Move parameter file opening into separate function
+ * Move common steps into common jenkins helper
+ * lc15: add jenkins helper
+ * Use generic L1 headers helper
+ * Copy sysmobts.service to osmo-bts-sysmo
+ * OML: move BTS number check into separate function
+ * lc15: make jenkins helper executable
+ * lc15: fix jenkins build
+ * Add missing include for abis.h header file
+ * RSL: receive and send multiple SI2q messages
+ * Use release helper from libosmocore
+ * si2q: do not consider count update as error
+ * Cleanup example config files
+ * Fix .deb build
+ * Unify *.service files
+ * lc15: cleanup board parameters reading
+ * lc15-mgr: update parameter read/write
+ * lc15: fix BTS revision and hw options
+ * lc15: make default config usable
+ * lc15: port lc15bts-mgr changes
+ * lc15bts-mgr: separate service file
+ * lc15: port lc15bts-mgr dependency changes
+ * Simplify jenkins build scripts
+ * OML: use fom_hdr while handling attr. request
+ * osmo-bts-trx: fix 'osmotrx legacy-setbsic'
+ * osmo-bts-trx: remove global variables from loops
+
+ [ Daniel Laszlo Sitzer ]
+ * octphy: Update outdated config param name in error message.
+
+ [ Jason DSouza ]
+ * Close TRX session before opening new one
+
+ [ Minh-Quang Nguyen ]
+ * l1sap.h: fix wrong L1SAP_FN2PTCCHBLOCK calculation according to TS 45.002 Table 6
+ * common/abis.c: fix 100% CPU usage after disconnecting OML/RSL link (Bug #1703)
+ * LC15: Bring back DSP trace argument
+ * LC15: Hardware changes
+ * LC15: TRX nominal TX power can be used from EEPROM or from BTS configuration
+ * rsl: Fix dropping of LAPDm UA message.
+ * LC15: properly handle BS-AG-BLKS-RES as received from BSC
+
+ [ Neels Hofmeyr ]
+ * sysmo: add L3 handle to l1prim messages
+ * pcu_sock: add pcu_connected() to query PCU availability
+ * tests/stubs.c: remove unused stubs
+ * fix typo in error message ('at lEast')
+ * oml, Set Chan Attr: treat unknown PCHAN types as error
+ * dyn PDCH: rsl rx dchan: also log ip.access message names
+ * doc: add ladder diagram on dynamic PDCH, add msc-README
+ * add missing DSUM entry to bts_log_info_cat
+ * fix compiler warning: printf format for sizeof()
+ * fix compiler warning: add missing case (PHY_LINK_CONNECTING)
+ * fix two compiler warnings: add two opaque struct declarations
+ * dyn PDCH: add bts_model_ts_connect() and _disconnect() stubs
+ * dyn PDCH: conf_lchans_for_pchan(): handle TCH/F_PDCH
+ * dyn PDCH: pcu_tx_info_ind(): handle TCH/F_PDCH in PDCH mode
+ * dyn PDCH: chan_nr_by_sapi(): handle TCH/F_PDCH according to ts->flags
+ * dyn PDCH: implement main dyn PDCH logic in common/
+ * dyn PDCH: sysmo-bts/oml.c: add ts_connect_as(), absorbing ts_connect() guts
+ * dyn PDCH: sysmo: handle TCH/F_PDCH init like TCH/F
+ * dyn PDCH: complete for sysmo-bts: implement bts_model_ts_*()
+ * error log: two minor clarifications
+ * debug log: log lchan state transitions
+ * debug log: log TS pchan type on connect
+ * fix lc15 build: put src/common/libbts.a left of -losmogsm
+ * lc15: add L3 handle to l1prim messages
+ * dyn PDCH: lc15: chan_nr_by_sapi(): handle TCH/F_PDCH according to ts->flags
+ * dyn PDCH: lc15: add ts_connect_as(), absorbing ts_connect() guts
+ * dyn PDCH: lc15: handle TCH/F_PDCH init like TCH/F
+ * dyn PDCH: lc15: complete for litecell15-bts: implement bts_model_ts_*()
+ * dyn PDCH: safeguard: exit if nothing pending in dyn_pdch_ts_disconnected()
+ * vty: install orphaned trx nominal power command
+ * fix compiler warnings: include bts_model.h in phy_link.c
+ * fix compiler warning: remove useless 'static' storage class for struct decl
+ * fix compiler warning: remove unused variable 'i' in calib_verify()
+ * log: osmo-bts-trx: change access burst logs to DEBUG level
+ * log: osmo-bts-trx: change PDTCH block logs to DEBUG level
+ * osmo-bts-trx: init OML only once by sending AVSTATE_OK with OPSTATE_ENABLED
+ * doc: move dyn_pdch.msc to osmo-gsm-manuals.git
+ * error log: rsl.c: typo x2
+ * info log: l1sap.c: add '0x' to hex output
+ * fix compiler warning: msg_utils.c: fn_chk() constify arg
+ * fix compiler warning: msg_utils.c: fn_chk() constify arg
+ * info log: l1sap.c: add '0x' to hex output
+ * error log: rsl.c: typo x2
+ * dyn PDCH: code dup: use conf_lchans_as_pchan()
+ * prepare dyn TS: split/replace conf_lchans_for_pchan()
+ * code dup: join [rsl_]lchan_lookup() from libbsc and osmo-bts
+ * dyn TS: common TCH/F_TCH/H_PDCH implementation
+ * sysmo/oml.c: rename ts_connect() to ts_opstart()
+ * dyn TS: implement SysmoBTS specifics
+ * lc15/oml.c: rename ts_connect() to ts_opstart()
+ * dyn TS: implement litecell15 specifics
+ * comment typo: common/l1sap.c
+ * log typo: trx_sched_set_pchan()
+ * dyn TS: sysmo,lc15: chan_nr_by_sapi(): add missing assertion
+ * fix comment in common/l1sap.c, function name changed
+ * dyn TS, dyn PDCH: common/l1sap.c: properly notice PDCH
+ * dyn PDCH: trx l1_if.c: factor out trx_set_ts_as_pchan() from trx_set_ts()
+ * dyn PDCH: complete for trx: implement bts_model_ts_[dis]connect()
+ * dyn PDCH: trx l1_if.c: drop fixme, add comment
+ * dyn TS: complete for TRX
+ * dyn TS: measurement.c: replace fixme with comment
+ * sysmo,lc15: ts_connect_as(): log error also for pchan_as == TCH/F_PDCH
+ * sysmo: fix dyn TS: Revert "Activate PTCCH UL" [in sysmobts]
+ * log: l1sap: add 0x to hex output of chan_nr, 5 times
+ * dyn TS: measurement: use correct nr of subslots, rm code dup
+ * dyn TS: sysmo,lc15: ph_data_req: fix PDCH mode detection
+ * Fix ip.access style dyn PDCH, broken in 37af36e85eca546595081246aec010fa7f6fd0be
+ * common/rsl: move decision whether to chan act ack/nack to common function
+ * octphy: fix build: Revert "octphy: fix for multiple trx with more than 1 dsp"
+ * octphy: fix build: Revert "octphy: add support for multiple trx ids"
+ * octphy: fix build with OCTSDR-OPENBSC-02.07.00-B708: name changed
+ * dyn TS: if PCU is not connected, allow operation as TCH
+ * log: sysmo,lc15: tweak log about sapi_cmds queue
+ * log causing rx event for lchan_lookup errors
+ * heed VTY 'line vty'/'bind' command
+ * sysmobts_mgr, lc15bts_mgr: fix tall context for telnet vty
+ * build: be robust against install-sh files above the root dir
+ * configure: check for pkg-config presence
+ * jenkins.sh: use osmo-build-dep.sh, log test failures
+ * msgb ctx: use new msgb_talloc_ctx_init() in various main()s
+ * jenkins-oct.sh: fix build: typo in deps path
+ * fix 'osmo-bts-* --version' segfault
+ * osmo-bts-trx: remove obsolete include of netif/rtp.h
+ * add jenkins_bts_trx.sh
+ * add jenkins_oct_and_bts_trx.sh
+ * jenkins: add jenkins_bts_model.sh
+ * bursts test: test_pdtch: pre-init result mem
+ * fix: dyn ts: uplink measurement report
+ * fix missing ~ in bit logic for lchan->si.valid in rsl_rx_sacch_inf_mod()
+ * SACCH: fix sending of SI with an enum value > 7
+ * SACCH SI: assert that SI enum vals fit in bit mask
+ * all models: fix vty write: bts_model_config_write_phy
+ * jenkins: add value_string termination check
+ * Revert "Add version to phy_instance"
+ * Revert "RSL: check for abnormal SI2q values"
+ * Revert "RSL: receive and send multiple SI2q messages"
+
+ [ Harald Welte ]
+ * sysmobts: screnrc/systemd-service: Use osmo-bts-sysmo instead of sysmobts
+ * Add .mailmap for mapping mail addresses in shortlog
+ * vty: Ensure to not use negative (error) sapi value
+ * sysmobts: Add correct nominal transmit power for sysmoBTS 1020
+ * sysmobts_eeprom.h: Fix/extend model number definitions
+ * Revert "sysmobts: Add correct nominal transmit power for sysmoBTS 1020"
+ * tx_power: Change PA calibration tables to use delta vales
+ * Add new unit-test for transmit power computation code
+ * sysmobts: fully support trx_power_params
+ * README: Add general project information and convert to markdown
+ * README: update some of the limitations
+ * sysmobts: Don't start with 0dBm TRX output power before ramping
+ * Remove unusued left-over gsm0503_conv.c
+ * scheduler_trx.c: Avoid code duplication for BER10k computation
+ * scheduler_trx: Avoid copy+pasting determining CMR from FN
+ * rx_tchh_fn(): Avoid copy+pasting formula to determine odd-ness of fn
+ * Consistently check for minimum attribute/TLV length in RSL and OML
+ * l1sap.c: Add spec reference to link timeout implementation
+ * osmo-bts-trx: Remove duplicate parsing of NM_ATT_CONN_FAIL_CRIT
+ * vty: Remove command for manual channel activation/deactivation
+ * l1_if: Add inline functions to check dsp/fgpa version at runtime
+ * sysmobts: Re-order the bit-endianness of every HR codec parameter
+ * OML Add osmocom-specific way to deactivate radio link timeout
+ * measurement: Remove dead code
+ * l1sap.c: Factor out function to limit message queue
+ * osmo-bts-sysmo/l1_if.c: PH-DATA.ind belongs to L1P, not L1C
+ * l1sap: if lchan is in loopback, don't accept incoming RTP
+ * TRX: Use timerfd and CLOCK_MONOTONIC for GSM frame timer (Closes: #2325)
+ * Add loopback support for PDTCH
+ * TRX: trx_if: Improve code description / comments
+ * trx_if: Improve error handling
+ * TRX: Rename trx_if_data() -> trx_if_send_burst()
+ * TRX: merge/simplify l1_if and trx_if code
+ * TRX: don't free l1h in trx_phy_inst_close()
+ * l1sap: Don't enqueue PTCCH blocks for loopback
+ * TRX: permit transmission of all-zero loopback frames
+ * jenkins helpers: some minimal documentation/comments + print errors
+ * VIRT-PHY: Initial check-in of a new virtual BTS
+ * VIRT-PHY: Fix handling of default values for vty configuration
+ * VIRT-PHY: Use IPv4 multicast groups for private / local scope
+ * VIRT-PHY: cause BTS to terminate in case of recv()/send() on udp socket returns 0
+ * Ensure we don't send dummy UI frames on BCCH for TC=5
+ * virt: Don't print NOTICE log message if ARFCN doesn't match
+ * VIRT-PHY: Report virtual RACH bursts with plausible burst type
+ * scheduler: Fix wrong log subsystem: L1C is L1 *control* not user data
+ * VIRT-PHY: Print NOTICE log message from unimplemented stubs
+ * TRX / VIRT-PHY: Make check for BCCH/CCCH more specific
+ * L1SAP: Print chan_nr and link_id always as hex
+ * VIRT-BTS: Support for GPRS
+ * L1SAP: Use RSL_CHAN_OSMO_PDCH across L1SAP
+ * GSMTAP: Don't log fill frames via GSMTAP
+ * TRX: Remove bogus extern global variable declarations
+ * l1sap/osmo-bts-sysmo: Improve logging
+ * TRX: Remove global variables, move SETBSIC/SETTSC handling into phy_link
+ * Fix build after recent gsm_bts_alloc() change
+ * Treat SIGTERM just like SIGINT in our programs
+
+ [ Tom Tsou ]
+ * trx: Add EGPRS tables, sequences, and mappings
+ * trx: Add EGPRS coding and decoding procedures
+ * trx: Enable EGPRS handling through burst lengths
+ * trx: Fix coverity BER calculation NULL dereference
+
+ [ Vadim Yanitskiy ]
+ * pcu_sock: use osmo_sock_unix_init() from libosmocore
+ * osmo-bts-trx/l1_if.c: use channel combination III for TCH/H
+ * scheduler_trx.c: strip unused variable
+
+ [ Mike McTernan ]
+ * osmo-bts-trx: Fix PCS1900 operation
+ * osmo-bts-trx: log decoder bit errors as DEBUG, not NOTICE
+
+ [ bhargava ]
+ * Change interface in osmo-bts for 11 bit RACH
+ * Update parameters in osmo-bts-sysmo for 11bit RACH
+ * 11bit RACH support for osmo-bts-litecell15
+ * Initialize parameters in osmo-trx for 11bit RACH
+
+ [ Philipp ]
+ * octphy: Fixing missing payload type in ph. chan. activation
+ * octphy: Fixing band selection for ARFCN 0
+ * octphy: reintroducing multi-trx support
+ * octopy: fixing renamed constant
+ * octphy: prevent mismatch between dsp-firmware and octphy headers
+ * rsl: improving the log output
+ * octphy: multi-trx support: fix AC_CHECK order
+ * RSL: drop obsolete NULL check
+ * RSL: add assertions to check args of public API
+ * OML: fix possible segfault: add NULL check in oml_ipa_set_attr()
+ * CTRL: make the CTRL-Interface IP address configurable
+ * l1sap: Fix expired rach slot counting
+ * l1sap: fix missing 'else's causing wrong rach frame expiry counts
+ * octphy: set tx attenuation via VTY
+ * octphy: Improve OML ADM state handling
+
+ [ Yves Godin ]
+ * DTX: fix 1st RTP packet drop
+
+ [ Alexander Chemeris ]
+ * l1sap: Fix use-after-free in loopback mode.
+ * vty: Add commands to manually activate/deactivate a channel.
+ * trx: Add "maxdlynb" VTY command to control max TA for Normal Bursts.
+ * rsl: Output RTP stats before closing the socket.
+ * osmo-bts-trx: Fix MS power control loop.
+ * osmo-bts-trx: Remove an unused variable. Resolves a compiler warning.
+ * osmo-bts-trx: Increase a maximum allowed MS power reduction step from 2dB to 4dB.
+ * Fix static build of osmo-bts-trx and osmo-bts-virtual.
+
+ [ Jean-Francois Dionne ]
+ * DTX: don't always perform AMR HR specific check
+ * DTX: fix SID-FIRST detection
+ * lc15,sysmobts l1_if: fix memleak in handle_mph_time_ind()
+ * sysmo,lc15: fix memory leak at each call placed
+ * DTX: fix "unexpected burst" error
+ * Fix AMR HR DTX FSM logic.
+ * Fix SACCH channel release indication not sent to BSC after location update.
+ * Fix RTP duration adjustment not done when speech resumes in DTX mode.
+
+ [ Ruben Undheim ]
+ * Fix some spelling errors
+
+ [ Holger Freyther ]
+ * Revert "deb: use gsm_data_shared.* from openbsc-dev"
+
+ [ Philipp Maier ]
+ * octphy VTY: fix vty write output for octphy's phy section
+ * octphy: Fix VTY commands
+ * l1sap: fix rach reason (ra) parsing
+ * l1sap: fix PTCCH detection
+ * octphy: fix usage of wrong define constant
+ * octphy: add CBCH support
+ * l1sap: improve log output
+ * octphy: print log message for multi-trx support
+ * octphy: display hint in case of wrongly configured transceiver number
+ * octphy: add conditional compilation to support latest octasic header release
+ * octphy: set tx/rx antenne IDs via VTY
+ * bts: revert trx shutdown order
+ * octphy: activate CBCH after all physical channels are activated
+ * octphy: align frame number for new firmware versions
+ * octphy: ensure that 11 bit rach flag is not set
+ * measurement: fix measurement reporting period
+ * measurement: make lchan_meas_check_compute() available to l1sap.c
+ * measurement: Compute measurement results on measurement idication
+ * measurement: exclude idle channels from uplink measurement
+ * octphy: integrate channel measurement handling
+ * octphy: remove old event control code
+ * osmo-bts-sysmo: Include frame number in MEAS IND
+ * measurement: fix measurement computation
+ * octphy: fix segfault
+ * Revert "measurement: exclude idle channels from uplink measurement"
+ * sysmobts: normalize frame number in measurement indication
+ * measurement: Improve log output
+ * measurement: improve log output
+ * octphy: improve log output
+ * octphy: initalize l1msg and only when needed
+ * octphy: initalize nmsg only when needed
+ * octphy: remove log output
+ * Revert "sysmobts: normalize frame number in measurement indication"
+ * osmo-bts-trx: fix missing frame number in MEAS IND
+ * osmo-bts-litecell15: Fix missing frame number in MEAS IND
+ * Revert "osmo-bts-sysmo: Include frame number in MEAS IND"
+ * octphy: complete value strings (octphy_cid_vals)
+ * octphy: do not send empty frames to phy
+ * osmo-bts-sysmo: Include frame number in MEAS IND
+ * measurement: fix measurment report
+ * octphy: remap frame number in MEAS_IND
+ * octphy: implement support for dynamic timeslots
+
+ [ Ivan Klyuchnikov ]
+ * osmo-trx-bts: Fix incorrect setting of RXGAIN and POWER parameters on second channel (TRX1) of osmo-trx
+ * osmo-trx-bts: Fix osmo-bts-trx crash on startup during reading phy instance parameters from config file
+ * osmo-trx-bts: Fix incorrect bts shutdown procedure in case of abis connection closure
+ * osmo-trx-bts: Fix incorrect bts shutdown procedure in case of clock loss from osmo-trx
+
+ [ Ivan Kluchnikov ]
+ * oml: Fix incorrect usage of const variable abis_nm_att_tlvdef_ipa
+
+ [ Pau Espin Pedrol ]
+ * phy_link: Fix typo in state being printed
+ * trx: Allow BTS and TRX to be on different IPs
+ * trx: Save osmotrx base-port vty properties
+ * sysmo/tch.c: Clean up use of empty buffer
+ * litecell15/tch.c: Clean up use of empty buffer
+ * Use L1P instead of L1C for TCH logging and allocation
+ * Fix annoying trailing whitespace
+ * sysmo, litecell15: Make sure all TCH events are triggered
+ * sysmo: Remove non longer valid -p option from help
+ * Allow passing low link quality buffers to upper layers
+ * l1sap.c: Avoid sending RTP frame with empty payload
+ * l1sap.c: fn_ms_adj: Add err logging and always return GSM_RTP_DURATION
+ * Move dump_gsmtime to libosmocore as osmo_dump_gsmtime
+ * Use osmo_dump_gsmtime to log fn across different layers
+ * lc15bts-mgr.cfg: Set default vswr to a value inside valid range
+ * litecell15: Register in vty limits for paX_pwr
+ * lc15: Tweak led colors used in service file
+ * lc-15, sysmo: l1_if: print name on PH-DATA.ind unknwon sapi
+ * lc15bts-mgr.service: Prepare dirs and sysctls for the process
+ * osmo-bts-trx: Enable osmotrx tx-attenuation oml by default
+ * osmo-bts-trx: Relax validation to allow TRX data bursts without padding
+
+ [ Sebastian Stumpf ]
+ * VIRT-PHY: Added example configurations for openbsc and osmobts.
+ * VIRT-PHY: Fixed timeslot in gsmtap-msg on downlink which was always 0.
+ * VIRT-PHY: Added test option for fast hyperframe repeat.
+
+ -- Max <msuraev at sysmocom.de> Fri, 25 Aug 2017 15:16:56 +0200
+
+osmo-bts (0.5.0) unstable; urgency=medium
* Initial release.
--
To view, visit https://gerrit.osmocom.org/3598
To unsubscribe, visit https://gerrit.osmocom.org/settings
Gerrit-MessageType: merged
Gerrit-Change-Id: I613d09ae0f9f0aa67be1dc6015da1fb9314110fd
Gerrit-PatchSet: 2
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Owner: Max <msuraev at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Holger Freyther <holger at freyther.de>
Gerrit-Reviewer: Jenkins Builder