This is merely a historical archive of years 2008-2021, before the migration to mailman3.
A maintained and still updated list archive can be found at https://lists.osmocom.org/hyperkitty/list/gerrit-log@lists.osmocom.org/.
Neels Hofmeyr gerrit-no-reply at lists.osmocom.orgHello Harald Welte, Jenkins Builder,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/1060
to look at the new patch set (#2).
hnbgw: parameterize iuh local port: add vty cmd
For completeness' sake, add VTY command to set the local Iuh port, to go with
the command that sets the local IP.
Change-Id: I4b5e9fe9fcfa489069a0728d47899ef4a61f7ce5
---
M src/hnbgw_vty.c
1 file changed, 14 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-iuh refs/changes/60/1060/2
diff --git a/src/hnbgw_vty.c b/src/hnbgw_vty.c
index 93c1f9a..ff75aea 100644
--- a/src/hnbgw_vty.c
+++ b/src/hnbgw_vty.c
@@ -114,6 +114,14 @@
return CMD_SUCCESS;
}
+DEFUN(cfg_hnbgw_iuh_local_port, cfg_hnbgw_iuh_local_port_cmd, "local-port <1-65535>",
+ "Accept Iuh connections on local port\n"
+ "Local interface port (default: 29169)")
+{
+ g_hnb_gw->config.iuh_local_port = atoi(argv[0]);
+ return CMD_SUCCESS;
+}
+
DEFUN(cfg_hnbgw_iuh_hnbap_allow_tmsi, cfg_hnbgw_iuh_hnbap_allow_tmsi_cmd,
"hnbap-allow-tmsi (0|1)",
"Allow HNBAP UE Register messages with TMSI or PTMSI identity\n"
@@ -133,12 +141,17 @@
static int config_write_hnbgw_iuh(struct vty *vty)
{
const char *addr;
+ uint16_t port;
vty_out(vty, " iuh%s", VTY_NEWLINE);
addr = g_hnb_gw->config.iuh_local_ip;
if (addr && (strcmp(addr, HNBGW_LOCAL_IP_DEFAULT) != 0))
vty_out(vty, " local-ip %s%s", addr, VTY_NEWLINE);
+
+ port = g_hnb_gw->config.iuh_local_port;
+ if (port && port != IUH_DEFAULT_SCTP_PORT)
+ vty_out(vty, " local-port %u%s", port, VTY_NEWLINE);
if (g_hnb_gw->config.hnbap_allow_tmsi)
vty_out(vty, " hnbap-allow-tmsi 1%s", VTY_NEWLINE);
@@ -160,6 +173,7 @@
vty_install_default(IUH_NODE);
install_element(IUH_NODE, &cfg_hnbgw_iuh_local_ip_cmd);
+ install_element(IUH_NODE, &cfg_hnbgw_iuh_local_port_cmd);
install_element(IUH_NODE, &cfg_hnbgw_iuh_hnbap_allow_tmsi_cmd);
install_element_ve(&show_hnb_cmd);
--
To view, visit https://gerrit.osmocom.org/1060
To unsubscribe, visit https://gerrit.osmocom.org/settings
Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I4b5e9fe9fcfa489069a0728d47899ef4a61f7ce5
Gerrit-PatchSet: 2
Gerrit-Project: osmo-iuh
Gerrit-Branch: master
Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de>
Gerrit-Reviewer: Harald Welte <laforge at gnumonks.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: Neels Hofmeyr <nhofmeyr at sysmocom.de>