[PATCH] openbsc[master]: dyn PDCH: allow allocating TCH/F on TCH/F_PDCH slots

[Neels Hofmeyr]

Review at  https://gerrit.osmocom.org/209

dyn PDCH: allow allocating TCH/F on TCH/F_PDCH slots

Remove check for dyn PDCH in _lc_find_trx(), instead call _lc_find_trx() via
_lc_find_bts() several times, so that pure TCH/F is preferred to TCH/F_PDCH.
Add this logic next to the other channel match decisions in chan_alloc().

BTW, the removed check in _lc_find_trx() whether PDCH is active is not
necessary, as described in the added comment for lchan_alloc().

Original patch idea by jolly, but split in two and implemented differently by
nhofmeyr.

Change-Id: I0c728b922656be03588b775638b610a93f8187d5
---
M openbsc/src/libbsc/chan_alloc.c
1 file changed, 29 insertions(+), 9 deletions(-)


  git pull ssh://gerrit.osmocom.org:29418/openbsc refs/changes/09/209/1

diff --git a/openbsc/src/libbsc/chan_alloc.c b/openbsc/src/libbsc/chan_alloc.c
index 8600846..f84f030 100644
--- a/openbsc/src/libbsc/chan_alloc.c
+++ b/openbsc/src/libbsc/chan_alloc.c
@@ -96,14 +96,7 @@
 		ts = &trx->ts[j];
 		if (!ts_is_usable(ts))
 			continue;
-		/* ip.access dynamic TCH/F + PDCH combination */
-		if (ts->pchan == GSM_PCHAN_TCH_F_PDCH &&
-		    pchan == GSM_PCHAN_TCH_F) {
-			/* we can only consider such a dynamic channel
-			 * if the PDCH is currently inactive */
-			if (ts->flags & TS_F_PDCH_MODE)
-				continue;
-		} else if (ts->pchan != pchan)
+		if (ts->pchan != pchan)
 			continue;
 		/* check if all sub-slots are allocated yet */
 		for (ss = 0; ss < subslots_per_pchan[pchan]; ss++) {
@@ -140,7 +133,12 @@
 	return NULL;
 }
 
-/* Allocate a logical channel */
+/* Allocate a logical channel.
+ *
+ * For TCH/F, we may return a dynamic TCH/F_PDCH channel (but prefer a pure
+ * TCH/F). If we pick a TCH/F_PDCH time slot, PDCH will be disabled later on;
+ * there is no need to check whether PDCH mode is currently active, here.
+ */
 struct gsm_lchan *lchan_alloc(struct gsm_bts *bts, enum gsm_chan_t type,
 			      int allow_bigger)
 {
@@ -180,6 +178,14 @@
 				lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F);
 				type = GSM_LCHAN_TCH_F;
 			}
+
+			/* try dynamic TCH/F_PDCH */
+			if (lchan == NULL) {
+				lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F_PDCH);
+				/* TCH/F_PDCH will be used as TCH/F */
+				if (lchan)
+					type = GSM_LCHAN_TCH_F;
+			}
 		}
 		break;
 	case GSM_LCHAN_TCH_F:
@@ -189,6 +195,14 @@
 			lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_H);
 			type = GSM_LCHAN_TCH_H;
 		}
+		/* If we don't have TCH/H either, try dynamic TCH/F_PDCH */
+		if (!lchan) {
+			lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F_PDCH);
+			/* TCH/F_PDCH used as TCH/F -- here, type is already
+			 * set to GSM_LCHAN_TCH_F, but for clarity's sake... */
+			if (lchan)
+				type = GSM_LCHAN_TCH_F;
+		}
 		break;
 	case GSM_LCHAN_TCH_H:
 		lchan =_lc_find_bts(bts, GSM_PCHAN_TCH_H);
@@ -197,6 +211,12 @@
 			lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F);
 			type = GSM_LCHAN_TCH_F;
 		}
+		/* If we don't have TCH/F either, try dynamic TCH/F_PDCH */
+		if (!lchan) {
+			lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F_PDCH);
+			if (lchan)
+				type = GSM_LCHAN_TCH_F;
+		}
 		break;
 	default:
 		LOGP(DRLL, LOGL_ERROR, "Unknown gsm_chan_t %u\n", type);

-- 
To view, visit https://gerrit.osmocom.org/209
To unsubscribe, visit https://gerrit.osmocom.org/settings

Gerrit-MessageType: newchange
Gerrit-Change-Id: I0c728b922656be03588b775638b610a93f8187d5
Gerrit-PatchSet: 1
Gerrit-Project: openbsc
Gerrit-Branch: master
Gerrit-Owner: Neels Hofmeyr <nhofmeyr at sysmocom.de>