From laforge at osmocom.org Sun Dec 1 13:40:33 2019 From: laforge at osmocom.org (Harald Welte) Date: Sun, 1 Dec 2019 14:40:33 +0100 Subject: OsmoDevCon 2020 registration Message-ID: <20191201134033.GB1292548@nataraja> Dear fellow Osmocom developers, I would like to invite all developers and contributors to Osmocom [sub]projects to register for OsmoDevCon 2020 (held on April 24th-27th, 2020 in Berlin). For details known so far, please check http://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCon2020 Please enter your name at https://osmocom.org/projects/osmo-dev-con/wiki/OsmoDevCon2020#Requested in case you would like to attend. Registering early allows proper planning. Thanks! Looking forward to meeting old and new Osmocom developers in April 2020. Regards, Harald -- - Harald Welte http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6) -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: From mg at sms-arsia.fr Tue Dec 3 10:33:12 2019 From: mg at sms-arsia.fr (MG - SMS ARSIA) Date: Tue, 3 Dec 2019 10:33:12 +0000 Subject: add 2 mobiles in osmocomBB In-Reply-To: References: <44e96884f5354999b5d53a22e33a61bf@sms-arsia.fr> Message-ID: <31e33479e54a41c18a3ac7f21fe5743e@sms-arsia.fr> Vadim, I really appreciated your work on osmocom and thanks for your answer. I did some tests after your suggestions but the second terminal seems not connected to a cell. What is wrong, do you have an idea? Then, the faketrx is open on ports 6700 and 6000 (it seems correct) [INFO] transceiver.py:104 Init transceiver 'BTS at 127.0.0.1:5700' [DEBUG] data_if.py:36 Init TRXD interface (L:0.0.0.0:5702 <-> R:127.0.0.1:5802) [DEBUG] ctrl_if.py:32 Init TRXC interface (L:0.0.0.0:5701 <-> R:127.0.0.1:5801) [INFO] transceiver.py:104 Init transceiver 'MS at 127.0.0.1:6700' [DEBUG] data_if.py:36 Init TRXD interface (L:0.0.0.0:6702 <-> R:127.0.0.1:6802) [DEBUG] ctrl_if.py:32 Init TRXC interface (L:0.0.0.0:6701 <-> R:127.0.0.1:6801) [INFO] transceiver.py:104 Init transceiver 'MS at 127.0.0.1:6000' [DEBUG] data_if.py:36 Init TRXD interface (L:0.0.0.0:6002 <-> R:127.0.0.1:6102) [DEBUG] ctrl_if.py:32 Init TRXC interface (L:0.0.0.0:6001 <-> R:127.0.0.1:6101) [INFO] fake_trx.py:392 Init complete The second Trxcon (trx) is offline and the output is : [...] <0000> trxcon.c:324 Init complete <0001> l1ctl_link.c:182 L1CTL has a new connection <0001> l1ctl.c:427 Received reset request (1) <0005> sched_trx.c:179 Reset scheduler and clock counter <0003> trx_if.c:454 read() failed with rc=-1 <0001> l1ctl.c:427 Received reset request (1) <0005> sched_trx.c:179 Reset scheduler and clock counter <0001> l1ctl.c:403 Received power measurement request (GSM900: 0 -> 0) [...] <0003> trx_if.c:170 No response from transceiver... <0003> trx_if.c:454 read() failed with rc=-1 <0003> trx_if.c:170 No response from transceiver... <0003> trx_if.c:174 Transceiver offline Finally, I modified the config file (multims) I wrote "sim none" (but also and "sim test" as in the guide). The telnet output shows the 2nd terminal's service is limited: MS 'one' is up, service is normal [...] automatic network selection state: A2 on PLMN MCC=001 MNC=01 (Test, Test) cell selection state: C3 camped normally ARFCN=51 MCC=001 MNC=01 LAC=0x03e8 CELLID=0x000a (Test, Test) radio resource layer state: idle mobility management layer state: MM idle, normal service MS 'two' is up, service is limited automatic network selection state: A1 trying RPLMN MCC=001 MNC=01 (Test, Test) cell selection state: C1 normal cell selection radio resource layer state: idle mobility management layer state: MM idle, PLMN search Regards, Matteo Gorgo From axilirator at gmail.com Tue Dec 3 20:31:31 2019 From: axilirator at gmail.com (Vadim Yanitskiy) Date: Wed, 4 Dec 2019 03:31:31 +0700 Subject: add 2 mobiles in osmocomBB In-Reply-To: <31e33479e54a41c18a3ac7f21fe5743e@sms-arsia.fr> References: <44e96884f5354999b5d53a22e33a61bf@sms-arsia.fr> <31e33479e54a41c18a3ac7f21fe5743e@sms-arsia.fr> Message-ID: Hello Matteo, >> $ ./fake_trx.py --trx MS at 127.0.0.1:6000 >> $ ./trxcon -s /tmp/osmocom_l2.two --trx-port 6703 > What is wrong, do you have an idea? sorry, my instructions were a bit misleading (port mismatch). Just start the second process of trxcon with the same port number as was given to fake_trx: $ ./trxcon -s /tmp/osmocom_l2.two --trx-port 6000 Hope this helps, good luck! With best regards, Vadim Yanitskiy. From mg at sms-arsia.fr Fri Dec 13 09:02:18 2019 From: mg at sms-arsia.fr (MG - SMS ARSIA) Date: Fri, 13 Dec 2019 09:02:18 +0000 Subject: add 2 mobiles in osmocomBB In-Reply-To: References: <44e96884f5354999b5d53a22e33a61bf@sms-arsia.fr> <31e33479e54a41c18a3ac7f21fe5743e@sms-arsia.fr> Message-ID: <87c0de45ad09431790b2b99942b1df29@sms-arsia.fr> Vadim, thank you very much. It works just after sending you the mail. (Indeed, I changed something more). Best Regards, Matteo -----Message d'origine----- De?: Vadim Yanitskiy Envoy??: mardi 3 d?cembre 2019 21:32 ??: MG - SMS ARSIA Cc?: baseband-devel at lists.osmocom.org Objet?: Re: add 2 mobiles in osmocomBB Hello Matteo, >> $ ./fake_trx.py --trx MS at 127.0.0.1:6000 $ ./trxcon -s >> /tmp/osmocom_l2.two --trx-port 6703 > What is wrong, do you have an idea? sorry, my instructions were a bit misleading (port mismatch). Just start the second process of trxcon with the same port number as was given to fake_trx: $ ./trxcon -s /tmp/osmocom_l2.two --trx-port 6000 Hope this helps, good luck! With best regards, Vadim Yanitskiy.