Here PcbDoc file @š12/06/2012š.

So, it all done :)

Best regards,

Andrey Sviyazov.

2012/6/12 Andrey Sviyazov <andreysviyaz@gmail.com>

Hi all!

Here final project UmTRXv2 @ 12/06/2012 (PcbDoc file will be attached to the next e-mail).

I found an mistake with non-SMD LED's positions in compare to Ettus where A-B in left-to-right orientation (see picture).

Andrew Karpenkov suggested me to change it because of it is not yet standard but people accustomed to this.

It is done.

Also he suggest me to make four test points for RXOUT legs of LMS because he work with this now and found it helpfull.

It is done.

Also test points which without connector now referenced as TST and thereforešRefDes of somešconnectors changed.

Jean-Samuel, please find Gerber files, NC drill and layer stack desription files which usually required to produce PCB.

Best regards,

Andrey Sviyazov.

2012/6/10 Andrey Sviyazov <andreysviyaz@gmail.com>

Hi all!

Here final project UmTRXv2 @ 10/06/2012 (PcbDoc file will be attached to the next e-mail).š

Jean-Samuel, please check SMD LED's placed at the front edge of the PCB.

If you agree with this variant then I'll generate Gerber files vs required layers and description to produce PCB.

If anybody find any mistake, please inform me immediatelly.

Best regards,

Andrey Sviyazov.