----- Missatge original -----
De: Kevin Redon <ml@mail.tsaitgaist.info>
Data: Dimarts, Novembre 13, 2012 21:42
Assumpte: Re: T=0 and T=1 sniffer
Per a: simtrace <simtrace@lists.osmocom.org>

> Hi,
>
> Excerpts from Roger Jardi Cedó's message of Tue Nov 13 17:45:40
> +0100 2012:
> > Dear all,
> >
> > I'am new in this mailing list.
> >
> > I'am a PhD. student at the University Rovira i Virgili
> studying smart cards (SC). I would like to log transmitted apdus
> between reader and SC (like credit card, ID card, sim, etc).
> >
> > I've recently bought a cheap sniffer (season interface) but I
> have problems with it, I lose data sniffing any smart card type
> (iso-7816).
> >
> > I'm asking if your device (v1.1) is valid for this purpose.
> Note that v2 would be compatible with credit card sized smart
> cards (ID-1 and ID-000 smart card slots (with presence
> detection): so to be able to also sniff credit card sized smart
> cards).
> SIMtrace v2 has no release date and is not currently being
> developed on. Thus stay with the current version (v1.2).
>
> > However, I've read too that v1.1 is capable to read smart card
> with both modes (T=0 and T=1) with proper accessories
> (http://shop.sysmocom.de/products/fullsize-sim-fpc and
> http://shop.sysmocom.de/products/sim-adapter).
>
> Yes, this is what you need for credit card size connectivity.
>
> >
> > It is possible? With this device, I will log any smart card type?
>
> no, not any. It only supports T=0 and T=1 (with few adjustments).
> This protocols are defined in IEC/ISO-7816 part 3.
> Other Smart cards can use other protocols (I2C, SPI, …). It may
> be possible to be compatible with it, but these are not
> supported by the software.
>
> kevin
>

Roger Jardí

Personal de Suport a la Recerca
Grup de recerca CRISES
Departament d'Enginyeria Informàtica i Matemàtiques
Universitat Rovira i Virgili

Despatx 132
Av. Països Catalans 26
43007 TARRAGONA

Tel. +34 977 55 82 70