Hello

I'm trying to get the osmo-trx-lms to work with my LimeSDR. the setup is the latest version of LimeSDR and osmo-trx built from source with the command (./configure --with-lms) .

I can see the device through LimeUtil but when I try the command it fails with the following error

Info: SSE3 support compiled in and supported by CPU
Info: SSE4.1 support compiled in and supported by CPU
Sun Jul 29 07:01:27 2018 DLGLOBAL <0002> telnet_interface.c:104 telnet at 127.0.0.1 4237
Sun Jul 29 07:01:27 2018 DLCTRL <0009> control_if.c:887 CTRL at 127.0.0.1 4236
Config Settings
Log Level… 3
Device args…
TRX Base Port… 5700
TRX Address… 127.0.0.1
GSM BTS Address… 127.0.0.1
Channels… 1
Tx Samples-per-Symbol… 4
Rx Samples-per-Symbol… 4
EDGE support… 0
Reference… 0
C0 Filler Table… 1
Multi-Carrier… 0
Tuning offset… 0
RSSI to dBm offset… 0
Swap channels… 0
Tx Antennas… 'BAND1’
Rx Antennas… ‘LNAW’

Setting SCHED_RR priority(18)
Sun Jul 29 07:01:27 2018 DMAIN <0000> osmo-trx.cpp:379 [tid=140014553808704] Config: Setting SCHED_RR failed

I tried using the configuration file from the osmo-trx git url and the below file as well. both gave the same result.

https://osmocom.org/attachments/3219/limesdr.cfg1

Any ideas?

Thanks

Bahaeddin Sagar