Hi,


Thanks for your advice. I ran make install as root, and there was no "Permission denied" error.


Log files are attached to this email. Pls help check this problem. Thank you.


Best Regards,

Xinke


From: Pau Espin Pedrol <pespin@sysmocom.de>
Sent: Monday, January 29, 2018 11:36
To: XINKE ZHANG; osmocom-net-gprs@lists.osmocom.org
Subject: Re: Problem when building OsmoSGSN
 

Hi,

it's difficult to say if you don't provide any log or detailed
information other than "it is not working", but from your input I'd say
that usually you need to run make install as root (sudo make install).
If you check more closely you will see that it most probably is
outputting some "Permission denied" error during that step.


--
- Pau Espin Pedrol <pespin@sysmocom.de>         http://www.sysmocom.de/
www.sysmocom.de
News: sysmocom introduces new sysmoBTS 2100. The sysmoBTS 2100 is a new, low-power, small-formfactor IP-backhaul GSM BTS for medium coverage outdoor applications.

=======================================================================
* sysmocom - systems for mobile communications GmbH
* Alt-Moabit 93
* 10559 Berlin, Germany
* Sitz / Registered office: Berlin, HRB 134158 B
* Geschaeftsfuehrer / Managing Director: Harald Welte