From: gitosis@osmocom.org Precedence: list To: osmocom-commitlog@lists.osmocom.org Date: Sun, 20 Jul 2014 20:33:54 GMT Message-ID: <201407202033.s6KKXsXg019858@git.osmocom.org> Subject: gr-osmosdr.git branch master updated. v0.1.1-10-g9cb023b Message: 1 This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "GNURadio hardware abstraction block". The branch, master has been updated via 9cb023b00a36d04ad8ea7e0bf08ad0623ab3e95f (commit) from c65d205d3b7cc734f97284b66054e16c90886df2 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/gr-osmosdr/commit/?id=9cb023b00a36d04ad8ea7e0bf08ad0623ab3e95f commit 9cb023b00a36d04ad8ea7e0bf08ad0623ab3e95f Author: Robert Ghilduta Date: Wed Jun 11 01:11:09 2014 -0700 bladeRF: Add XB-200 support This commit adds support for the bladeRF XB-200 transverter expansion board. To enable the expansion board and to allow the osmocom source or sink to tune down to 0Hz, parameter xb200 has to be set. XB-200 comes with 4 filter banks which can be selected by passing their name as a value of the xb200 parameter. Automatic filter selection will be enabled if no value is given to the xb200 parameter. Example: osmocom_fft -a bladerf,xb200 osmocom_fft -a bladerf,xb200=50M The following values are valid: "custom" : custom band "50M" : 50MHz band "144M" : 144MHz band "222M" : 222MHz band "auto3db" : Select fiterbank based on -3dB filter points "auto" : Select filerbank based on -1dB filter points (default) ----------------------------------------------------------------------- Summary of changes: lib/bladerf/bladerf_common.cc | 39 ++++++++++++++++++++++++++++++++++++--- lib/bladerf/bladerf_common.h | 2 ++ 2 files changed, 38 insertions(+), 3 deletions(-) hooks/post-receive -- GNURadio hardware abstraction block