From: gitosis@osmocom.org Precedence: list To: osmocom-commitlog@lists.osmocom.org Date: Thu, 20 Jun 2013 15:50:30 GMT Message-ID: <201306201550.r5KFoUk1097136@git.osmocom.org> Subject: osmo-bts.git branch sysmocom/0.3.0-next updated. 0.3.0-7-g602afee Message: 9 This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, sysmocom/0.3.0-next has been updated via 602afee3df4cace9af26931b58afd0ca65103e0d (commit) via 026a716bc6e71c8f6b5a9d77115e2293f9262e28 (commit) from d7b37b68cacc508fb2814013bfdbee081cd29efd (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=602afee3df4cace9af26931b58afd0ca65103e0d commit 602afee3df4cace9af26931b58afd0ca65103e0d Author: Holger Hans Peter Freyther Date: Thu Jun 20 17:18:38 2013 +0200 sysmobts: Introduce an auto-band config to ease DCS/DCS, PCS/PCS changes During development one switches from GSM900 to GSM1800 and GSM850 to GSM1900. This commit attempts to make this switch more easy. GSM1800 and GSM1900 have overlapping ARFCNs. This means that the mapping from bands to arfcn is not injective. Because of that I removed the code to deduce the band from the ARFCN. This was done in commit 8c3d807b3fc785ffb18aeb97355150c92221e8a0. The auto-band option allows to move between GSM900/GSM1800 and GSM850/GSM1900. Add a simple testcase with these auto-band configurations. http://cgit.osmocom.org/osmo-bts/commit/?id=026a716bc6e71c8f6b5a9d77115e2293f9262e28 commit 026a716bc6e71c8f6b5a9d77115e2293f9262e28 Author: Holger Hans Peter Freyther Date: Thu Jun 20 17:46:27 2013 +0200 sysmobts: Do not write "trx-calibration-path (null)" in the config file When not specifying a config path, then saving the running config it would end up as "(null)" and then leads to an error like this: <0006> calib_file.c:147 Failed to open '(null)/calib_rxu_850.cfg' for calibration data. Add a NULL check to avoid this issue when writing the config file. ----------------------------------------------------------------------- Summary of changes: .gitignore | 1 + configure.ac | 1 + include/osmo-bts/gsm_data.h | 3 + src/osmo-bts-sysmo/Makefile.am | 4 +- src/osmo-bts-sysmo/oml.c | 19 +---- src/osmo-bts-sysmo/sysmobts_vty.c | 36 +++++++++- src/osmo-bts-sysmo/utils.c | 87 +++++++++++++++++++++++ src/osmo-bts-sysmo/utils.h | 10 +++ tests/Makefile.am | 2 +- tests/{paging => sysmobts}/Makefile.am | 11 +-- tests/sysmobts/sysmobts_test.c | 122 +++++++++++++++++++++++++++++++++ tests/sysmobts/sysmobts_test.ok | 19 +++++ 12 files changed, 287 insertions(+), 28 deletions(-) create mode 100644 src/osmo-bts-sysmo/utils.c create mode 100644 src/osmo-bts-sysmo/utils.h copy tests/{paging => sysmobts}/Makefile.am (54%) create mode 100644 tests/sysmobts/sysmobts_test.c create mode 100644 tests/sysmobts/sysmobts_test.ok hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)