I installed master branch now(4/feb/2017 at 18:30) and retry, but I can not release channel and receive error in nitb.
I
do not access to a external timing source like octoClock, do you use
external timing source? do you have a easy solution to check that?
My NITB log is like your log by 20170203014240662 and repeat. I retried connecting about 10 min but nothing happened.
NITB log that repeat is:
20170204071216381 DRLL <0000> chan_alloc.c:352 (bts=0,trx=0,ts=0,pchan=CCCH+
SDCCH4) Allocating lchan=0 as SDCCH
20170204071216381
DRSL <0004> abis_rsl.c:1819 (bts=0,trx=0,ts=0,ss=0) Activating
ARFCN(0) SS(0) lctype SDCCH r=LOCATION_UPDATE ra=0x06 ta=0
20170204071216381 DRSL <0004> abis_rsl.c:580 (bts=0,trx=0,ts=0,pchan=CCCH+SDCCH4) Tx RSL Channel Activate with act_type=INITIAL
20170204071216381 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state NONE -> ACTIVATION REQUESTED
20170204071216381 DRSL <0004> abis_rsl.c:1546 (bts=0,trx=0,ts=0,ss=0) CHANNEL ACTIVATE ACK
20170204071216381 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state ACTIVATION REQUESTED -> ACTIVE
20170204071226381 DRSL <0004> abis_rsl.c:852 (bts=0,trx=0,ts=0,ss=0) RF Channel Release due to error: 1
20170204071226381 DRSL <0004> abis_rsl.c:762 (bts=0,trx=0,ts=0,ss=0) DEACTivate SACCH CMD
20170204071226381 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state ACTIVE -> RELEASE DUE ERROR
20170204071226382 DRSL <0004> abis_rsl.c:925 (bts=0,trx=0,ts=0,ss=0) RF CHANNEL RELEASE ACK
20170204071228382 DRSL <0004> abis_rsl.c:811 (bts=0,trx=0,ts=0,ss=0) is back in operation.
20170204071228382 DRSL <0004> abis_rsl.c:1189 (bts=0,trx=0,ts=0,ss=0) state RELEASE DUE ERROR -> NONE