hi,
check if you selected the right timeslot for d-channel:
use "dslot=1" (old driver) or "layermask=0x02" (newer driver) when loading the
hfcmulti.ko.
use "--debug=DMI" and loop your line (connect pin
1 to pin 4, and pin 2 to pin 5). do you get activation-message when
looping? if not, be sure to shift all jumpers toward the slot
cover.
if you see the loop, but no activation-message after
booting BS11 (takes about 15 minutes), swap connector 1 and 2. one connector
must be connected to pin 1 and 2, and the other to pin 4 and
5.
andreas
Hello there,
finally, got nearly everything to work, but
am unable to see the network on my mobile and am getting this message when
running bsc_hack with a config file :
DB: Database initialized.
DB:
Database prepared.
1 device
found
id:
0
Dprotocols:
00000018
Bprotocols:
0000000e
protocol:
4
nrbchan:
30
name:
hfc-e1.1
activate bchan
activate bchan
<000c> trau_frame.c:116
can't decode unknown TRAU Frame Type 0x00
Thank in
advance
Ihab el Bakri