Hi,

I cannot find a description of this command in the manual. This is very 
useful to debug
ms, antennas and radio.

OsmoBSC> show conn
Active subscriber connections:
conn ID=232, MSC=0, hodec2_fail=0, mgw_ep=rtpbridge/1@mgw
BTS 1, TRX 0, Timeslot 1, Lchan 0: Type TCH_F
   Connection: 1, State: ESTABLISHED
   BS Power: 0 dBm, MS Power: 10 dBm
   Channel Mode / Codec: SPEECH_V1
   No Subscriber
   Bound IP: 192.168.1.75 Port 16404 RTP_TYPE2=0 CONN_ID=0
   Conn. IP: 192.168.1.70 Port 4084 RTP_TYPE=3 SPEECH_MODE=0x00
   Measurement Report:
     Flags:
     MS Timing Offset: 0
     L1 MS Power: 10 dBm, Timing Advance: 4
     RXL-FULL-dl:  -73 dBm, RXL-SUB-dl:  -73 dBm RXQ-FULL-dl: 0, 
RXQ-SUB-dl: 0
     RXL-FULL-ul:  -57 dBm, RXL-SUB-ul:  -58 dBm RXQ-FULL-ul: 0, 
RXQ-SUB-ul: 0

I guess "dl" means downlink, from BTS to MS, and "ul" means uplink, MS 
to BTS.

But, what is the difference between FULL and SUB ? What does the two 
rightmost items mean,
those which are 0 in the above? What does the "No Subscriber" mean, 
should that be IMSI ?

Still on the subject of LimeSDR Mini, now debugging radio and antenna 
arrangements.

Regards,
Gullik