Hi everyone,

I am trying to test Openbsc without a BTS. I need your help as I am very new to Openbsc.

After doing the configurations for openbsc-multitrx.cfg file this is how I started the process:

cd openbsc/openbsc
src/osmo-nitb -c doc/examples/osmo-nitb/nanobts/openbsc-multitrx.cfg -C

And the output I received was:

<0019> input/ipaccess.c:925 enabling ipaccess BSC mode
DB: Database initialized.
DB: Database prepared.
<0001d> sms_queue.c:220 Attempting to send 20 SMS

 

 

After this I added a subscriber in the hlr and the subscriber was added in the output:

 <0019> ipaccess.c:841 enabling ipaccess BSC mode
DB: Database initialized.
DB: Database prepared.
<001d> sms_queue.c:232 Attempting to send 20 SMS
<0002> gsm_subsciber.c:390 Expiring inactive subscriber Testing(ID 1)

 

After this I used the following commands on the osmo-nitb console and receive the following output:

Openbsc>show subscrber id 1

Openbsc> subscriber id 1 send sms Hello

Openbsc> subscriber id 1 silent call start any

%subscriber not attached

 

 

Am I doing the right thing, are there some more configurations that I am required to do and is this the only output that can be achieved without a BTS?

Also the lac is being displayed as 0/0x0, is this how it should have been?

Please let me know, I really need help on this.

Thanks and regards

Priyanka