nik

On Mon, Mar 5, 2012 at 11:39 AM, Nik Pakar <nikpakar@gmail.com> wrote:

Hi Andreas,

Every thing works fine.

Just one last question. I cant find any sample dialplan option towards gsm and sip interface. tried quite a few didnt worked.

Appreciate if you can just give the last hint how would the dial plan should looks like towards gsm and sip.

Thanks again.
Nik

On Mon, Mar 5, 2012 at 10:23 AM, Nik Pakar <nikpakar@gmail.com> wrote:

Hi Andreas, extreamlly sorry for the blind question.

I didnt do autogen to create the configure.

Extreamly sorry again.

Rgds
Nik

On Mon, Mar 5, 2012 at 10:19 AM, Nik Pakar <nikpakar@gmail.com> wrote:
Hi Andreas, thousand times thanks for the correct hint.

Its indeed crystal clear now.

I have tried the git clone from git://git.osmocom.org/openbsc.git but noticed there is still misdn requirement and also no sip support.

Then found from the maillist that i should clone git://git.osmocom.eu/openbsc.git instead of .org which shows sip interfaces on the source.

How ever there is no configure file on this source.

Am i still checking out from the wrong git ?

Once again highly appreciate some light on the final bit.

Thanks
Nik

On Mon, Mar 5, 2012 at 7:44 AM, jolly <andreas@eversberg.eu> wrote:

> Do I have to have mISDN for LCR even im not going to use any isdn
> interface ? Im trying to connect the NITB to LCR and LCR to asterisk
> all on ip.
>
> Thanks for any help.
>
> Rgds
> Nik

hi nik,

you don't need misdn to use lcr with sip and gsm anymore. also you don't
need any patch. the lcr and openbsc compile out of the box supporting
each other. the howto is a bit outdated.

try to compile the lcr from the git. don't use chan_lcr, since it still
works with isdn only. you need to setup a sip interface in interface.conf:

[sip]
sip <local ip> <remote ip>[:<port>]
sip 10.0.0.12 10.0.0.34
earlyb no
tones no

use asterisk machine for remote ip. if you have asterisk on the same
machine, change the sip port of asterisk and use "remoteip:port".

regards,

andreas