Hi Max and everyone,


Thanks so much for your help! I will test what you said below today.

Definitely getting a USRP1 with WBX as you suggested. I am thinking about also getting Matlab home version and a few other add ons. I heard the USRP1 is not supported by Matlab directly but KIT's Simulink-UHD does. 

If I do get Matlab home, would that be helpful to the OP-25 community? Does anyone else here have Matlab?

thanks,
joe

   
On Mar 14, 2014, at 9:38 AM, <ikj1234i@yahoo.com> <ikj1234i@yahoo.com> wrote:

 

Hi Joe

Great, sounds like you should be all set.  The 'source' command might not produce any output (no news is good news in this case).   You probably won't be able to do much though without SDR hardware such as a USRP.  However you should be able to run GRC which enables you to create flowgraphs for simulation and analysis purposes...  If you have any disctap'ed receivers you could use them with OP25, (although you should not expect LSM quality reception)

Max


__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (34)
.

__,_._,___