If you’re getting garbled audio and are running op25 on Ubuntu 14.04, then you can apply the following change that should address the stutter. However, this step is not necessary
when running Unbutu 16.04 or newer.
sudo cp /etc/pulse/client.conf /etc/pulse/client.confbackup
sudo nano /etc/pulse/client.conf
Edit the following line: From: ; autospawn = yes To: autospawn = no
Restart!
Bill, WA8WG
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com]
Sent: Tuesday, May 15, 2018 4:43 PM
To: op25-dev@yahoogroups.com
Subject: Re: [op25-dev] RTL-SDR and OP25 on Linux Mint 64-bit
Ah, you were right, I needed to adjust the NAC in my trunk.tsv file.. I also changed -v to 3. After I made those adjustments, I was able to get data/audio on the control channel, albeit garbled
Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (8) |