I was able to successfully compile op25 on Raspbian Stretch Lite, but once rx.py was executed,  there was a recurring buzz sound approximately every four seconds in the audio output from the Pi.   I went back and retested the code with Raspbian Jessie Lite and got the same results.     I opted to use the “git clone https://github.com/boadbod/op25.git” option when building op25.   Did I miss something that is causing  the recurring buzz noise in the audio?
Thank you!
Bill, WA8WG                                                                                              
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] 
Sent: Saturday, September 23, 2017 8:03 PM
To: op25-dev@yahoogroups.com
Subject: RE: [op25-dev] Re: Raspbian Jessie Stretch Lite
  
Bill,
Type changes were required in several places in the files tbls.h, tbls.cc, aux_sub.h and aux_sub.cc.
With these in place I can now successfully compile and run op25 on Raspbian Stretch using gcc-6.3.0 without using the -Wno-narrowing hack.
You can either clone my repo from https://github.com/boatbod/op25.git or pull just the changed files.
https://raw.githubusercontent.com/boatbod/op25/master/op25/gr-op25_repeater/lib/imbe_vocoder/aux_sub.h
https://raw.githubusercontent.com/boatbod/op25/master/op25/gr-op25_repeater/lib/imbe_vocoder/aux_sub.cc
https://raw.githubusercontent.com/boatbod/op25/master/op25/gr-op25_repeater/lib/imbe_vocoder/tbls.h
https://raw.githubusercontent.com/boatbod/op25/master/op25/gr-op25_repeater/lib/imbe_vocoder/tbls.cc
Graham
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (7) |