As to the specific question about throttling - having a throttle block in a flow graph should /only/ be done if there is no hardware source or sink (usrp or soundcard). If the throttle block is in the flow graph at the same time as a hardware block you have the two-clocks problem.

As for optimal sample rates using the USRP the slowest rate supported by the hardware (i.e., the highest decimation rate) is still more than enough for recording/capture of P25. 2M is overkill unless you're trying to capture an entire band 2 MHz wide.

In playing back a file and displaying the result in a GUI is the case where you need a software throttle...

Max

--- In op25-dev@yahoogroups.com, <md123@...> wrote:
>
> Hi guys! I am wondering what is the optimal sampling rate for capturing of P25 transmissions. My main problem (aside from not getting audio) is that, while I can successfully capture at upwards of 2.0M, I can only play back at around 56k without greying out the gui. I am a little confused about this because I thought the throttle would control the clock speed for play back. Any suggestions on configuring the settings would be greatly appreciated.
> Cheers,
> Matt
> -------------
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Recent Activity:
Visit Your Group
.

__,_._,___