Great news thanks. Been running for a month now just want to stay up to date.
zach
From: op25-dev@yahoogroups.com <op25-dev@yahoogroups.com>
Sent: Monday, May 21, 2018 1:29 PM
To: op25-dev@yahoogroups.com
Subject: Re: [op25-dev] RPi's 3 for 16GB or 32GB?
I haven't updated it in the last several weeks, but you should be able
to do a git update from the running RPi image. The tools are installed
on the system.
John
----
On 05/21/2018 02:03 PM, zlatiolais@yahoo.com [op25-dev] wrote:
> Hey john the all in one image is what I have to. Are you able to run the
> git to update without any issues. I haven’t tried it yet and want to see
> if there any gotya in it
>
> *From:* op25-dev@yahoogroups.com <op25-dev@yahoogroups..com>
> *Sent:* Monday, May 21, 2018 10:13 AM
> *To:* op25-dev@yahoogroups.com
> *Subject:* Re: [op25-dev] RPi's 3 for 16GB or 32GB?
>
> Aaron, I"m not sure just what you were looking for, but I have a RPi3
> image with ready-to-run op25 (boatbod branch) at
>
> http://febo.com/pages/os_images/2018-03-18_op25_rpi.zip
>
> Install it onto a 4GB or larger SD card (it will autoexpand to fill
> available card size) and run on the RPi. There's a desktop link to
> start the scanner, but you will need to configure the trunk.tsv file and
> possibly other files for your local system. You may also need to mess
> with your local audio settings to select the correct sound device on the
> Pi..
>
> John
> ----
> On 05/20/2018 09:53 PM, Matt Ames matt.ames7bc@gmail.com
> <mailto:matt..ames7bc@gmail.com> [op25-dev] wrote:
> > Yes - It's on our project webpage.
> > http://osmocom.org/projects/op25/wiki/InstallInstructionsPage
> >
> > You might need to do a "sudo apt-get install git" first however.
> >
> >
> >
> >
> >
> > On 21 May 2018 at 11:42, atms169@yahoo.com <mailto:atms169@yahoo.com>
> <mailto:atms169@yahoo.com>
> > [op25-dev] <op25-dev@yahoogroups.com <mailto:op25-dev@yahoogroups.com
> <mailto:op25-dev@yahoogroups.com%20%3cmailto:op25-dev@yahoogroups.com>>>
> > wrote:
> >
> > __
> >
> > Alright, thank you. Now what would be the next step once I have the
> > image installed?
> >
> >
> > Is there a link somewhere with instructions? Step by step?
> >
> > Thank you
> >
> > Aaron
> >
> >
> >
>
>
Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (16) |