Just a quick update. 

I believe I have a working repeater with asterisk app_rpt and op25. I'm working entirely in vmware so it's a bit easier since i can snapshot everything.

I have a discriminator tapped pro-95 thats receiving p25 from my motorola astro saber on 446.000.

 I have one vm running ubuntu 10.04, gnuradio 3.2.2, and op25. Another vm is running the acid install from app_rpt. The /etc/asterisk/rpt.conf has been updated based on the examples on the repeater page.

I have the disctap_rx.py pointing to the asterisk vm on port 32001, and the rpt.conf file on the asterisk vm pointing to the op25 vm on port 34001. I have the soundcard_tx.py listening on 34001 and using -A pulse (for pulse audio output).

When i key up on the Astro Saber I hear a p25 stream about .2 seconds later. I also checked in the asterisk CLI using "show usrp". Everytime I key up i see additional read/write stats. As soon as I release the mic button I see a "hungup zaptel....." message, assuming it's closing the channel.

All I have to do is hook this up to my ft7800r's 9600bps data port and I should have a working p25 repeater!!!!!

I'm also thinking of using sdr# on my laptop to grab the datastream from 446.000 directly and piping the audio via virtual audio cable. we'll see how that works.

Thanks for the help Max!!

-Ryan KC9GMY




On Thu, Dec 26, 2013 at 9:29 PM, Ryan Schilder <rjschilder@gmail.com> wrote:
yep looks like I got it. had to change it in disctap_rx.py. changed chan usrp 1 and 2.

I'll try to give this a try more over the weekend. I have to find the cable i made for the ft 7800r so i can transmit.

Thanks Max!!

-Ryan KC9GMY


On Thu, Dec 26, 2013 at 9:26 PM, Ryan Schilder <rjschilder@gmail.com> wrote:
oh wait I think I got it, one sec


On Thu, Dec 26, 2013 at 9:25 PM, Ryan Schilder <rjschilder@gmail.com> wrote:
Hi Max,

I just made the change and I still get the same error. I changed it in disctap_rx.py and repeater.py, no luck. Can you give a bit more direction?


Thanks!
-Ryan KC9GMY


On Thu, Dec 26, 2013 at 9:20 PM, <ikj1234i@yahoo.com> wrote:
 

Apologies and thanks all at the same time for serving as guinea pig on this - some of that code has a degree of bitrot.

The 4th argument should be set to gr.sizeof_short - if super-lazy you could just use 2 .

Max





__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (6)
Recent Activity:
Visit Your Group
.

__,_._,___