Sorry just looking at the picture you linked to.
You need to delete quite a few blocks there because you’re using float baseband input!
Therefore, delete all the blocks “Float to Complex” until “Quadrature Demod” inclusive. Then connect the Audio Source directly to the “Decimating FIR Filter”.
You can also delete any block that references the ‘freq’ variable (so delete the ‘freq’/”Frequecncy” “Variable Text Box” and see what goes red – double check – then delete those too EXCEPT the ‘auto_tune_offset_freq’ “Variable Static Text”. This should remain, but you need to change the Default Value to just the number 0.
Hopefully that’ll do it!
From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] On Behalf Of allanjs1986
Sent: Sunday, 8 April 2012 10:43 AM
To: op25-dev@yahoogroups.com
Subject: [op25-dev] Re: GRC Flowcharts
Cool thanks why is my screen full of errors lol?
[IMG]http://i39.tinypic.com/23krl0h.png[/IMG]
--- In op25-dev@yahoogroups.com, Balint <balint256@...> wrote:
>
> Hi again!
>
> I've added the FM and OP25 GRC flowgraph files to gr-baz/samples so you can
> update your local copy and they should appear.
>
>
>
> From: op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] On Behalf
> Of allanjs1986
> Sent: Sunday, 8 April 2012 9:54 AM
> To: op25-dev@yahoogroups.com
> Subject: [op25-dev] GRC Flowcharts
>
>
>
>
>
> Yes me again haha :-)
> I thought it might be a good idea for the less advanced in the group (like
> me) and others, for members to save there flow chart files in the files
> section. Like a P25 decode flowchart, using the gr-baz project. FM
> Demodulation and any other that may be useful.
>
