Aaron, I"m not sure just what you were looking for, but I have a RPi3
image with ready-to-run op25 (boatbod branch) at

http://febo.com/pages/os_images/2018-03-18_op25_rpi.zip

Install it onto a 4GB or larger SD card (it will autoexpand to fill
available card size) and run on the RPi. There's a desktop link to
start the scanner, but you will need to configure the trunk.tsv file and
possibly other files for your local system. You may also need to mess
with your local audio settings to select the correct sound device on the Pi...

John
----
On 05/20/2018 09:53 PM, Matt Ames matt.ames7bc@gmail.com [op25-dev] wrote:
> Yes - It's on our project webpage.
> http://osmocom.org/projects/op25/wiki/InstallInstructionsPage
>
> You might need to do a "sudo apt-get install git" first however.
>
>
>
>
>
> On 21 May 2018 at 11:42, atms169@yahoo.com <mailto:atms169@yahoo..com>
> [op25-dev] <op25-dev@yahoogroups.com <mailto:op25-dev@yahoogroups.com>>
> wrote:
>
> __
>
> Alright, thank you.  Now what would be the next step once I have the
> image installed?
>
>
> Is there a link somewhere with instructions? Step by step?
>
> Thank you
>
> Aaron
>
>
>