On Sun, Mar 26, 2017 at 7:49 AM, Chuck Kelsey wb2edv@roadrunner.com
[op25-dev] <op25-dev@yahoogroups.com> wrote:
> Tom,
>
> Are you listening to P25, phase 2 simulcast? If so, how are your results and what hardware are you using/
>
> Chuck
Yes. Have a listen yourself:
http://allstar.kd7lxl.hamwan.net:8000/
It's monitoring two talkgroups, so if it seems like it's cutting
between two conversations that is why. Compared to my Uniden scanner
there is a lot lower latency at the beginning of each transmission
(the Uniden will miss the beginning of the transmission).
Hardware is
- 1090 MHz ADS-B antenna at about 20 ft.
- SMA tee (other side goes to the ADS-B receiver). This messes up the
impedance, but not really a big deal for receive.
- NooElec RTL-SDR with TCXO https://smile.amazon.com/gp/product/B01HA642SW/
- Intel NUC DN2820FYKH with Intel Celeron N2820 (I know I said I
started with a VM, but I transitioned to the Nuc for permanent
installation.)
Biggest outstanding issue I want to correct is audio level
equalization / compression. The dispatch consoles seem to a lot hotter
than most of the subscriber radios. I have not been able to get LADSPA
dysonCompress to work.
Tom
Posted by: Tom Hayward <tom@tomh.us>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (6) |
