FWIW, for multi-channel simultaneous reception, another option to look at is usrp_rx.py, more info is here
http://op25.osmocom.org/trac/wiki.png/wiki/RepeaterPage

Max

--- In op25-dev@yahoogroups.com, "trinmole" <lukekb@...> wrote:
>
> I just found Steve's earlier posts explaining that op25_decoder_ff.cc was depreciated and to stick a slicer in front of the bf version. I also realized that the OP25 GRC blocks came from Baz. I was able to figure out how hook everything together by looking at that.
>
> After setting the return from general_work in op25_decoder_bf to n, so it only gives output when samples are received, I am able to record P25 CAI voice channels off of a SmartNet system using C++.
>
> I would like to be able to record multiple channels at the same time using multiple instances of OP25. The problem is that I don't think I have enough CPU. I am monitoring 8Mhz of spectrum because the channels are pretty spread out.
>
> Are there any performance tweaks I could try to improve CPU utilization? Are there any Static variables or other things that would make running multiple instances of OP25 or libmbe tough?
>
> - Luke
>
> --- In op25-dev@yahoogroups.com, "trinmole" <lukekb@> wrote:
> >
> > I am trying to use the OP25 blocks for a C++ program. I have everything running fine as a .GRC. I also have a makefile to bundle everything up into a library.
> >
> > I am confused which C++ blocks I should be using - should it be op25_fsk4_demod_ff.cc connected to op25_decoder_ff.cc ?
> >
> > op25_decoder_ff.h get exported to /usr/include/ however only op25_decoder_bf.cc is included in the Makefile.am
> >
> > There is no op25_fsk_demod_fb.cc so I am not sure how I would connect the decoder_bf block in.
> >
> > What are the correct C++ blocks to use to replicate the "OP25 FSK4 Demod" & "OP25 Deocder" Python Blocks?
> >
> > Are there any C++ programs I could use as an example?
> >
> > Thanks for any pointers!
> >
> > - Luke
> >
>

• New Members 2