fixeria submitted this change.
common: reset lchan meas state in gsm_lchan_release()
lchan->meas (including interf_meas_num and num_ul_meas) is normally
only reset by lchan_meas_reset() called from rsl_tx_chan_act_ack() on
RSL CHANNEL ACTIVATION. Idle logical channels are never RSL-activated,
so their measurement state is never reset via that path.
On an OML link re-establishment, osmo-bts does not exit: abis.c tears
down the signalling links, the bts_shutdown FSM powers down all TRXs,
and then waits for reconnect. The gsm_bts/trx/ts/lchan structures
remain in memory, so stale interf_meas_num survives the reconnect.
This is why we're seeing these ERRORs while running ttcn3-bts-test:
(bts=0,trx=2,ts=4,ss=6) Not enough room to store interference report (0dBm)
Add a lchan_meas_reset() call to gsm_lchan_release(), which is called
from gsm_ts_release() when the nm_channel_fsm enters state
NM_CHAN_ST_OP_DISABLED_NOTINSTALLED. This is exactly the right
moment: the radio is fully stopped, so no new samples arrive.
Change-Id: I18dc9d30417b0c5b2e579660d4a087d93445f956
AI-Assisted: yes (Claude)
---
M src/common/lchan.c
1 file changed, 6 insertions(+), 0 deletions(-)
diff --git a/src/common/lchan.c b/src/common/lchan.c
index 1fdb3f1..65be89f 100644
--- a/src/common/lchan.c
+++ b/src/common/lchan.c
@@ -34,6 +34,7 @@
#include <osmo-bts/bts_model.h>
#include <osmo-bts/asci.h>
#include <osmo-bts/ta_control.h>
+#include <osmo-bts/measurement.h>
#include <errno.h>
static const struct value_string lchan_s_names[] = {
@@ -224,6 +225,11 @@
/* reset all Abis related config: */
memset(&lchan->abis_ip, 0, sizeof(lchan->abis_ip));
+ /* Unconditionally reset measurement state to prevent stale
+ * interf_meas_num/num_ul_meas from accumulating across an OML
+ * link re-establishment (idle lchans skip RSL activation). */
+ lchan_meas_reset(lchan);
+
/* FIXME: right now we allow creating the rtp_socket even if chan is not
* activated... Once we check for that, we can move this check at the
* start of the function */
To view, visit change 42909. To unsubscribe, or for help writing mail filters, visit settings.