fixeria submitted this change.
mobile: add a separate logging category for CSD
Change-Id: If9db0759aeb4324ace9ae258c852787f37897d83
Related: OS#4396
---
M src/host/layer23/include/osmocom/bb/common/logging.h
M src/host/layer23/src/common/logging.c
M src/host/layer23/src/mobile/tch_data.c
M src/host/layer23/src/mobile/tch_data_sock.c
4 files changed, 36 insertions(+), 19 deletions(-)
diff --git a/src/host/layer23/include/osmocom/bb/common/logging.h b/src/host/layer23/include/osmocom/bb/common/logging.h
index 40a7e81..3920d2e 100644
--- a/src/host/layer23/include/osmocom/bb/common/logging.h
+++ b/src/host/layer23/include/osmocom/bb/common/logging.h
@@ -28,6 +28,7 @@
DPRIM,
DLUA,
DGAPK,
+ DCSD,
DTUN,
DRLCMAC,
DLLC,
diff --git a/src/host/layer23/src/common/logging.c b/src/host/layer23/src/common/logging.c
index 0401360..283b7f1 100644
--- a/src/host/layer23/src/common/logging.c
+++ b/src/host/layer23/src/common/logging.c
@@ -159,6 +159,12 @@
.color = "\033[0;36m",
.enabled = 1, .loglevel = LOGL_DEBUG,
},
+ [DCSD] = {
+ .name = "DCSD",
+ .description = "Circuit Switched Data",
+ .color = "\033[0;36m",
+ .enabled = 1, .loglevel = LOGL_DEBUG,
+ },
[DTUN] = {
.name = "DTUN",
.description = "Tunnel interface",
diff --git a/src/host/layer23/src/mobile/tch_data.c b/src/host/layer23/src/mobile/tch_data.c
index 6ee89dc..7169efa 100644
--- a/src/host/layer23/src/mobile/tch_data.c
+++ b/src/host/layer23/src/mobile/tch_data.c
@@ -81,7 +81,7 @@
{
struct tch_data_state *state = (struct tch_data_state *)priv;
- LOGP(DL1C, LOGL_DEBUG, "%s(): [flags=0x%08x] %s\n",
+ LOGP(DCSD, LOGL_DEBUG, "%s(): [flags=0x%08x] %s\n",
__func__, flags, msgb_hexdump(msg));
if (state->sock != NULL && msgb_length(msg) > 0)
@@ -96,7 +96,7 @@
tch_csd_sock_recv(state->sock, msg);
- LOGP(DL1C, LOGL_DEBUG, "%s(): [n_bytes=%u/%u] %s\n",
+ LOGP(DCSD, LOGL_DEBUG, "%s(): [n_bytes=%u/%u] %s\n",
__func__, msg->len, msg->data_len, msgb_hexdump(msg));
}
@@ -166,7 +166,7 @@
tch_csd_sock_recv(state->sock, msg);
if (msgb_length(msg) < buf_size) {
- LOGP(DL1C, LOGL_NOTICE,
+ LOGP(DCSD, LOGL_NOTICE,
"%s(): not enough bytes for sync Tx (%u < %zu)\n",
__func__, msgb_length(msg), buf_size);
}
@@ -189,7 +189,7 @@
static void tch_v110_ta_status_update_cb(void *priv, unsigned int status)
{
- LOGP(DL1C, LOGL_DEBUG, "%s(): [status=0x%08x]\n", __func__, status);
+ LOGP(DCSD, LOGL_DEBUG, "%s(): [status=0x%08x]\n", __func__, status);
/* TODO: update status lines of the soft-UART (if state.suart != NULL) */
}
@@ -233,7 +233,7 @@
* signalling rate shall be adapted to a synchronous 600 bit/s stream. */
case BCAP_RATE(GSM48_BCAP_IR_8k, GSM48_BCAP_UR_300):
default:
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): IR 0x%02x / UR 0x%02x combination is not supported\n",
__func__, bcap->data.interm_rate, bcap->data.user_rate);
return NULL;
@@ -367,20 +367,20 @@
static int tch_data_check_bcap(const struct gsm_mncc_bearer_cap *bcap)
{
if (bcap == NULL) {
- LOGP(DL1C, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): CC transaction without BCap\n",
__func__);
return -ENODEV;
}
if (bcap->mode != GSM48_BCAP_TMOD_CIRCUIT) {
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): Transfer mode 0x%02x is not supported\n",
__func__, bcap->mode);
return -ENOTSUP;
}
if (bcap->coding != GSM48_BCAP_CODING_GSM_STD) {
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): Coding standard 0x%02x is not supported\n",
__func__, bcap->coding);
return -ENOTSUP;
@@ -392,26 +392,26 @@
case GSM48_BCAP_ITCAP_FAX_G3:
break;
default:
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): Information transfer capability 0x%02x is not supported\n",
__func__, bcap->transfer);
return -ENOTSUP;
}
if (bcap->data.rate_adaption != GSM48_BCAP_RA_V110_X30) {
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): Rate adaption (octet 5) 0x%02x is not supported\n",
__func__, bcap->data.rate_adaption);
return -ENOTSUP;
}
if (bcap->data.sig_access != GSM48_BCAP_SA_I440_I450) {
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): Signalling access protocol (octet 5) 0x%02x is not supported\n",
__func__, bcap->data.sig_access);
return -ENOTSUP;
}
if (bcap->data.transp != GSM48_BCAP_TR_TRANSP) {
- LOGP(DCC, LOGL_ERROR,
+ LOGP(DCSD, LOGL_ERROR,
"%s(): only transparent calls are supported so far\n",
__func__);
return -ENOTSUP;
@@ -514,7 +514,7 @@
struct tch_data_state *state = NULL;
if (ms->tch_state == NULL || ms->tch_state->is_voice) {
- LOGP(DCC, LOGL_INFO, "No data call is ongoing, "
+ LOGP(DCSD, LOGL_INFO, "No data call is ongoing, "
"ignoring [dis]connection event for CSD socket\n");
return;
}
diff --git a/src/host/layer23/src/mobile/tch_data_sock.c b/src/host/layer23/src/mobile/tch_data_sock.c
index 7bfebf3..7ce5a4f 100644
--- a/src/host/layer23/src/mobile/tch_data_sock.c
+++ b/src/host/layer23/src/mobile/tch_data_sock.c
@@ -51,7 +51,7 @@
{
struct osmo_fd *bfd = &state->conn_bfd;
- LOGP(DMOB, LOGL_NOTICE, "TCH CSD sock has closed connection\n");
+ LOGP(DCSD, LOGL_NOTICE, "TCH CSD sock has closed connection\n");
tch_csd_sock_state_cb(state->ms, false);
@@ -155,25 +155,25 @@
len = sizeof(un_addr);
rc = accept(bfd->fd, (struct sockaddr *)&un_addr, &len);
if (rc < 0) {
- LOGP(DMOB, LOGL_ERROR, "Failed to accept() a new connection\n");
+ LOGP(DCSD, LOGL_ERROR, "Failed to accept() a new connection\n");
return -1;
}
if (conn_bfd->fd >= 0) {
- LOGP(DMOB, LOGL_NOTICE, "TCH CSD sock already has an active connection\n");
+ LOGP(DCSD, LOGL_NOTICE, "TCH CSD sock already has an active connection\n");
close(rc); /* reject this connection request */
return 0;
}
osmo_fd_setup(conn_bfd, rc, OSMO_FD_READ, &tch_csd_sock_cb, state, 0);
if (osmo_fd_register(conn_bfd) != 0) {
- LOGP(DMOB, LOGL_ERROR, "osmo_fd_register() failed\n");
+ LOGP(DCSD, LOGL_ERROR, "osmo_fd_register() failed\n");
close(conn_bfd->fd);
conn_bfd->fd = -1;
return -1;
}
- LOGP(DMOB, LOGL_NOTICE, "TCH CSD sock got a connection\n");
+ LOGP(DCSD, LOGL_NOTICE, "TCH CSD sock got a connection\n");
tch_csd_sock_state_cb(state->ms, true);
@@ -200,7 +200,7 @@
rc = osmo_sock_unix_init_ofd(bfd, SOCK_STREAM, 0, sock_path, OSMO_SOCK_F_BIND);
if (rc < 0) {
- LOGP(DMOB, LOGL_ERROR, "Could not create unix socket: %s\n", strerror(errno));
+ LOGP(DCSD, LOGL_ERROR, "Could not create unix socket: %s\n", strerror(errno));
talloc_free(state);
return NULL;
}
To view, visit change 35656. To unsubscribe, or for help writing mail filters, visit settings.