Attention is currently required from: Hoernchen, laforge, lynxis lazus.
Hoernchen uploaded patch set #2 to this change.
The following approvals got outdated and were removed: Code-Review+1 by laforge, Code-Review+1 by lynxis lazus, Verified+1 by Jenkins Builder
firmware: use the full 11 bit US_FIDI.FI_DI_RATIO
US_FIDI_FI_DI_RATIO_Msk is 0x7ff,
cemu rejected >= 0x400 in emu_update_fidi() and masked with 0x3ff
in card_emu_uart_update_fidi(), but update_fidi() used by
the sniffer already used 0x7ff.
-> ratios 1024..2047 are unusable in cemu, which is the entire upper
half of ISO 7816-3 Table 7 at Di=1.
A reader trying one of those in a PPS gets the proposal echoed and
accepted, after which the card keeps transmitting at the old rate.
FI_DI_RATIO is clock periods per bit -> larger ratio is a SLOWER link.
The old check rejected slow values but accepted Fi=372/Di=64, ratio 5 !?
Unify and use the register mask (= shifed by 0 so usable as value) and
reject ratios that do not fit rather than truncating to garbage dividers.
Change-Id: I6211dd5be7c5c5d2150af2aa37a403b33e6d340d
---
M firmware/libcommon/source/card_emu.c
M firmware/libcommon/source/mode_cardemu.c
M firmware/libcommon/source/simtrace_iso7816.c
3 files changed, 4 insertions(+), 4 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/25/43125/2
To view, visit change 43125. To unsubscribe, or for help writing mail filters, visit settings.