Attention is currently required from: dexter.
2 comments:
Patchset:
This
File doc/manuals/chapters/bts.adoc:
Patch Set #2, Line 700: [options="header",cols="45%,25%,25%"]
these need to add up to 100%, with this patch the build passes:
```
diff --git a/doc/manuals/chapters/bts.adoc b/doc/manuals/chapters/bts.adoc
index 111c5051f..195fc32b6 100644
--- a/doc/manuals/chapters/bts.adoc
+++ b/doc/manuals/chapters/bts.adoc
@@ -697,7 +697,7 @@ will repeat itself. This means the next usable ICP can be found at an offset
of 128.
.External connections of a BTS with two E1 ports
-[options="header",cols="45%,25%,25%"]
+[options="header",cols="50%,25%,25%"]
|===
|Function |Subslot offset (ICP) |ICP count
|E1 port A |4 |124
@@ -713,7 +713,7 @@ used to serve a single air interface timeslot. The two sets of ICPs must not be
mixed. Only one set may be used at a time.
.ICPs to use TRU with 16kbps subslots per TRAU
-[options="header",cols="45%,25%,25%"]
+[options="header",cols="50%,25%,25%"]
|===
|Function |Subslot offset (ICP) |ICP count
|TRU-0, RSL/OML |512 |4
@@ -748,7 +748,7 @@ connections on the other end may contain gaps and do not have to be
consecutive.
.ICPs to use TRU with 64kbps subslots per TRAU
-[options="header",cols="45%,25%,25%"]
+[options="header",cols="50%,25%,25%"]
|===
|Function |Subslot offset (ICP) |ICP count
|TRU-0, RSL/OML |712 |4
@@ -781,4 +781,4 @@ NOTE: In case voice TRAU frames are transferred, only the first of the four
16kbps subslots is used. When the timeslot is switched to GPRS/EGPRS, the
full 64kbps bandwidth will be used. This also means that the set of four
ICPs per TRAU must be connected consecutively. Also the connection
-to the outside must be aligned to E1 timeslot borders.
\ No newline at end of file
+to the outside must be aligned to E1 timeslot borders.
```
To view, visit change 32029. To unsubscribe, or for help writing mail filters, visit settings.