As I see your Channel Requests remain unanswered from the network. Are you sure that you are using firmware compiled with enabled TX (I do not remember if it could be observed from layer1.log)?If yes, you can try not to use the ARFCN that is selected by MS automatically (in your log - 748DCS) by signal level, but try to stick on another ARFCN: e.g. 746DCS - second candidate by rxlev - or other. for this case use "stick 746" option and check for network's answers (ImmAss or ImmAssReject).You can also try to use other SIMs.Thanks,PavelOn Mon, Apr 15, 2013 at 1:11 PM, Hoàng Mạnh Hùng <hunghm.vn@gmail.com> wrote:
Hi Pavel Baturko,
mobile.cfg, mobile.log, layer1.log and other logs in case of automatic network selection "network-selection-mode auto" ans "no stick" option:
root@UR:/tmp# telnet 127.0.0.1 4247
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Welcome to the OsmocomBB control interface
OsmocomBB> en
OsmocomBB# shoOsmocomBB# show
OsmocomBB# show ms
MS '1' is up, service is limited
IMEI: 357337016773249
IMEISV: 3573370167732490
IMEI generation: fixed
automatic network selection state: A0 null
cell selection state: PLMN search
radio ressource layer state: idle
mobility management layer state: MM idle, PLMN search
OsmocomBB# show sub
OsmocomBB# show subscriber
Mobile Subscriber of MS '1':
IMSI: 452040399998391
ICCID: 89840403940099983911
Service Provider Name: VIETTEL
SMS Service Center Address: +84980200030
Status: U2_NOT_UPDATED IMSI detached LAI: invalid
Key: sequence 1 74 5d 70 bb 32 6a a0 00
Access barred cells: no
Access classes: C4
List of preferred PLMNs:
MCC |MNC
-------+-------
452 |04 (Vietnam, Viettel Mobile)
456 |08 (Cambodia, Viettel)
457 |03 (Laos, Unitel)
372 |03 (Haiti, 03)
OsmocomBB# show
OsmocomBB# show sup
OsmocomBB# show support
Supported features of MS '1':
Phase 2 mobile station
R-GSM : yes
E-GSM : yes
P-GSM : yes
GSM900 Class : 4
DCS 1800 : yes
DCS Class : 1
GSM 850 : yes
GSM 850 Class: 4
PCS 1900 : yes
PCS Class : 1
GSM 480 : no
GSM 450 : no
CECS : no
VGCS : no
VBS : no
SMS : yes
SS_IND : yes
PS_CAP : no
CMSP : no
SoLSA : no
LCSVA : no
LOC_SERV : no
A5/1 : yes
A5/2 : yes
A5/3 : no
A5/4 : no
A5/5 : no
A5/6 : no
A5/7 : no
A5/1 : yes
Channels : SDCCH + TCH/F + TCH/H
Full-Rate V1 : yes
Full-Rate V2 : yes
Full-Rate V3 : no
Half-Rate V1 : yes
Half-Rate V3 : no
Min RXLEV : -106
OsmocomBB# call 1 0987785050
OsmocomBB#
% (MS 1)
% Call has been rejected
OsmocomBB# sms 1 0987785050 testSMS
OsmocomBB#
% (MS 1)
% SMS to 0987785050 failed: (MO) SMS rejected
OsmocomBB# net
OsmocomBB# network sho
OsmocomBB# network show 1% (MS 1)
OsmocomBB#
% (MS 1)
% Trying to registering with network...
% (MS 1)
% Trying to registering with network...
% (MS 1)
% Trying to registering with network...
% Searching network...% (MS 1)
% (MS 1)
% Trying to registering with network...
% (MS 1)
% Trying to registering with network...
% Searching network...
OsmocomBB# sms 1 0987785050 testSMScall 1 0987785050
% (MS 1)
% Trying to registering with network...
OsmocomBB#
% (MS 1)
% Call has been rejected
OsmocomBB# sms 1 0987785050 testSMS
OsmocomBB#
% (MS 1)
% SMS to 0987785050 failed: (MO) SMS rejected
% (MS 1)
% Trying to registering with network...
2013/4/15 Pavel Baturko <pabftk@gmail.com>
Hi,Could you please provide mobile.log and log from VTY in case of automatic network selection "network-selection-mode auto" ans "no stick" option?Thanks,PavelOn Mon, Apr 15, 2013 at 10:46 AM, hungbangchu <hunghm.vn@gmail.com> wrote:
Hi,<http://baseband-devel.722152.n3.nabble.com/file/n4025987/mobile.log> help
My attachment is file mobile.log.
Any one can mobile.log--
me?
pab wrote
> Hi,
>
>> There is no such command.
>> Error occurred during reading below line:
>> stick on
> 'stick' option should be used as 'stick ARFCN'. with this option your MS
> will be forced to use specific ARFCN. Be sure that this ARFCN is visible
> by
> your MS and owned by your SIM's service provider.
>
> Also I think it's difficult for people in this list to help you without
> logs, at least attached mobile app log could help.
>
> Thanks,
> Pavel
View this message in context: http://baseband-devel.722152.n3.nabble.com/Baseband-MS-1-is-up-service-is-limited-tp4025964p4025987.html
Sent from the baseband-devel mailing list archive at Nabble.com.
--Thanks and Best Regards
--
From: Hoàng Mạnh Hùng