Hi all,
I have been using C123 for a long time with FTDI cable.
I recently bought a C139 on which I wanted to run layer1 fw, i check the SW version using #02# and software version is "1.3.29", UART Flag is "0"
On going through the mailing list I found these to be sufficient for using osmocom-bb but some how there is a problem on loading.
When I use the fwg command
./osmocon -p /dev/ttyUSB0 -m c140 -c ../../target/firmware/board/compal_e86/layer1.highram.bin
I get the following
got 2 bytes from modem, data looks like: 04 81 ..
got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A
got 1 bytes from modem, data looks like: 01 .
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
read_file(chainloader): file_size=32, hdr_len=4, dnload_len=15341
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 43 C
Received PROMPT2 from phone, starting download
handle_write(): 4096 bytes (4096/15341)
handle_write(): 4096 bytes (8192/15341)
handle_write(): 4096 bytes (12288/15341)
handle_write(): 3053 bytes (15341/15341)
handle_write(): finished
It receives prompt2 and loads the file but doesn't move ahead, the phone does not show layer1 on the screen either.
when i use fwg command (add -m c140xor )
./osmocon -p /dev/ttyUSB0 -m c140xor -c ../../target/firmware/board/compal_e86/layer1.highram.bin
I get the fwg:
got 1 bytes from modem, data looks like: 04 .
got 1 bytes from modem, data looks like: 81 .
got 5 bytes from modem, data looks like: 1b f6 02 00 41 ....A
got 1 bytes from modem, data looks like: 01 .
got 1 bytes from modem, data looks like: 40 @
Received PROMPT1 from phone, responding with CMD
read_file(chainloader): file_size=32, hdr_len=4, dnload_len=15341
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 43 C
Received PROMPT2 from phone, starting download
handle_write(): 4096 bytes (4096/15341)
handle_write(): 4096 bytes (8192/15341)
handle_write(): 4096 bytes (12288/15341)
handle_write(): 3053 bytes (15341/15341)
handle_write(): finished
got 1 bytes from modem, data looks like: 1b .
got 1 bytes from modem, data looks like: f6 .
got 1 bytes from modem, data looks like: 02 .
got 1 bytes from modem, data looks like: 00 .
got 1 bytes from modem, data looks like: 41 A
got 1 bytes from modem, data looks like: 03 .
got 1 bytes from modem, data looks like: 57 W
Received MAGIC NACK from phone, you need to have "1003" at 0x803ce0
got 1 bytes from modem, data looks like: 66 f
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6d m
got 1 bytes from modem, data looks like: 74 t
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 6c l
Received FTMTOOL from phone, ramloader has aborted
got 1 bytes from modem, data looks like: 65 e
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 72 r
got 1 bytes from modem, data looks like: 6f o
got 1 bytes from modem, data looks like: 72 r
It now move ahead and says the received MAGIC NACK and also that you need to have "1003" at 0x803ce0, this is a documented problem and i believe in compal_e86 binaries must have been taken care of.