Hello everyone,<div><br></div><div>I&#39;m new to OscomBB and have few questions about its architecture. I have ordered the C123 and the serial cable. Note: I have OpenBTS running quite well and would like now to explore the other end.</div>
<div><br></div><div>I did look at the Software Overview page and have the following questions:</div><div>a/ where can I log the raw burst (156 bits)? [ not the IQ samples ] on the PC? on the ARM7?</div><div>b/ on the downllink path, how is the FCH detection process split between dsp, arm7 and PC? ie from raw burst to FCH detection indication and offset value.</div>
<div>c/ on the downllink path, how is the SCH decode process split between dsp, arm7 and PC? ie from raw burst to GSM frame number, BSIC etc..</div><div>d/ on the downllink path, how is the BCCH decode process split between dsp, arm7 and PC? ie from raw burst to System Informations...</div>
<div>d/ on the uplink path, how the RACH encode process (RACH_REQ) is split between dsp, arm7 and PC?</div><div><br></div><div>Thank your for your kind answers.</div><div><br></div><div>Rgds</div><div>Nghia</div>