Hello,

 

Thanks u all  this gr8.. work .. 

 

forgive me for my little novice question.. most probably goes to Mr. Deiter.. but any one from list be kind enough help me from list..

 

I'm pretty new to Osmocombb

i made a setup as advised on Sun, 01 Aug 2010  blog. with hp8922.

 

===Q===

" You just "tune" to the right ARFCN and time slot (I don't use hopping during testing) and see that you get your code running."

===UQ==

 

Q.1)  i learned from wiki how to change ARFCN from Layer on application by using below command,  but how to tune right TS ?

 

./layer23 -a 871 -i 127.0.0.1

 

Q.2) even If OsmocomBB Layer1 CTL is able to tune to right ARFCN and Time Slot, will i be able to listen what so ever broadcasting from HP8922 from C123 speaker or PC speaker. non-encrypted, debugging non-hopping)

 

Q.3) what command and interface will be used to enter the frequency hoping  parameter, in case i will use FH option? to tune OsmocomBB  l1CTL

Q.4) How to enter Minimalistic L1 interface, what is interface available to insert theses command to layer1

 

DEDIC_MODE_EST_REQ , LAYER1_RESET, DEDIC_MODE_DATA_IND

 

thanks , Martin