Hi, Вадим, Tomi thank you for your answers.

I suspected toolchain from early beginning because two years ago I managed to make things work.
I primarily followed procedure from  this link http://bb.osmocom.org/trac/wiki/Tutorials/CalypsoBTS.

When I do steps with OsmoBTS:

git clone git://git.osmocom.org/osmo-bts.git 

cd osmo-bts
autoreconf -i
./configure --enable-trx
make
sudo make install
Then I can't use osmo-bts.cfg in this form:

bts 0
 band DCS1800
 ipa unit-id 1801 0
 oml remote-ip 127.0.0.1
 rtp jitter-buffer 0
 paging queue-size 200
 paging lifetime 0
 fn-advance 30
 ms-power-loop -60
 timing-advance-loop
 settsc
 setbsic
 trx 0
  rxgain 0
  power 0
  slotmask 1 0 0 0 0 0 0 0
specified from mentioned URL.

Also new OsmoBTS binary is not called osmobts-trx, but osmo-bts-trx and expect to use new kind of osmo-bts.cfg format.

Maybe I should checkout some other branch from
git clone git://git.osmocom.org/osmo-bts.git  ?


Поздрав,
Мирко К.





On Tue, Feb 23, 2016 at 8:32 AM, Вадим Яницкий <axilirator@gmail.com> wrote:
Hi!
 
Can we still use osmocomBB phones (C140,C139..) with Osmo-BTS project?

Yes.

I use transceiver  program from *jolly/testing* branch and
firmware in compal_86 ( trx.highram.bin ) from  *sylvian/testing* branch,
all from osmocomBB.

Stop doing this mix. The firmware from one branch you use incompatible with host software form another. Use one branch only!
It looks like you have a new toolchain "gnu-arm-build.3.sh". The firmware images from this branches works better if it's compiled with older toolchain version.
Try to use http://bb.osmocom.org/trac/attachment/wiki/GnuArmToolchain/gnu-arm-build.2.sh or https://github.com/axilirator/gnu-arm-installer.

I know that Calypso BTS support only one timeslot.

Using two phones you will be able to serve two timeslots.


С наилучшими пожеланиями,
Яницкий Вадим.



--
Puno pozdrava,
Mirko Kovacevic