As stated in an old discussion, the prim_rx_nb.c file should be modified to change the time slot number: "l1s_rx_win_ctrl(arfcn, L1_RXWIN_NB, 0);”
however if i change it to another number (ex: 2,4,6), the phone will not be able to detect the BCCH signal of the BTS
so it will not connect to the network. Am I changing the wrong parameter ?
Best regards,
Robert,
On Wed, Mar 16, 2016 at 02:56:45PM +0200, robert wrote:
I’m thinking about modifying some code to have the phone listen to the
paging group corresponding to my IMSI.
yes, that kind of modification would be a 'bug fix', and one that we'd
like to receive.
Do you think it is doable or are there some hardware limitations that
could prevent this ?
There certainly is no limitation in the hardware, if paging works with
the original Motorola/Compal firmware.
--
- Harald Welte <laforge@gnumonks.org> http://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)