<div dir="ltr">Андрей, напиши ему свой адрес?<div>Меня в копию поставь.</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Sat, Aug 3, 2013 at 6:48 AM, jiangwy <span dir="ltr"><<a href="mailto:wyjiang@ljshuoda.com" target="_blank">wyjiang@ljshuoda.com</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><u></u>





<div style="MARGIN:10px">
<div>Hi Andrey Sviyazov.</div>
<div> </div>
<div>I have tried the kal program on both boards, the output are:</div>
<div> </div>
<div>
<div>The following commands are executed on the normal board</div>
<div>./kal -s GSM900 -v -R A:0</div>
<div>kal: Scanning for GSM-900 base stations.</div>
<div>channel detect threshold: 19506.878626                                                               </div>
<div>        chan: 11 (937.2MHz - 13.389kHz) power: 53673.23                       </div>
<div>        chan: 14 (937.8MHz +   4Hz)     power: 64031.10                       </div>
<div>        chan: 16 (938.2MHz +  30Hz)     power: 37823.70                                             </div>
<div>        chan: 43 (943.6MHz +   2Hz)     power: 77249.29                                        </div>
<div>        chan: 50 (945.0MHz -  24Hz)     power: 29420.52                                             </div>
<div> </div>
<div>./kal -s GSM900 -v -R B:0        </div>
<div>kal: Scanning for GSM-900 base stations.</div>
<div>channel detect threshold: 28406.616263                                                              </div>
<div>        chan: 11 (937.2MHz - 6.120kHz)  power: 53776.77                       </div>
<div>        chan: 14 (937.8MHz -  59Hz)     power: 76683.83                       </div>
<div>        chan: 16 (938.2MHz + 28.945kHz) power: 46724.84                                                                                          </div>
<div>        chan: 43 (943.6MHz + 38.130kHz) power: 65350.20                       </div>
<div>        chan: 50 (945.0MHz -  21Hz)     power: 29930.09           </div>
<div> </div>
<div>The following commands are executed on another board seeming to be abnormal</div>
<div>./kal -s GSM900 -v -R A:0</div>
<div>kal: Scanning for GSM-900 base stations.</div>
<div>channel detect threshold: 4486.504362                                         </div>
<div>        chan: 5 (936.0MHz -  15Hz)      power: 6734.70                        </div>
<div>        chan: 12 (937.4MHz +  50Hz)     power: 9339.20                                                </div>
<div>        chan: 83 (951.6MHz -  13Hz)     power: 6462.91          </div>
<div>        </div>
<div>./kal -s GSM900 -v -R B:0</div>
<div>kal: Scanning for GSM-900 base stations.</div>
<div>channel detect threshold: 27671.315417                                        </div>
<div>        chan: 5 (936.0MHz +  24Hz)      power: 29673.93                                           </div>
<div>        chan: 12 (937.4MHz +  40Hz)     power: 69096.60                                            </div>
<div>        chan: 83 (951.6MHz -   4Hz)     power: 46394.73                       </div>
<div> </div>
<div>./kal -c 1004 -R A:0</div>
<div>kal: Calculating clock frequency offset.</div>
<div>Using E-GSM-900 channel 1004 (931.0MHz)</div>
<div>average         [min, max]      (range, stddev)</div>
<div>+   2Hz         [-80, 79]       (159, 44.543312)</div>
<div>overruns: 0</div>
<div>not found: 34</div>
<div> </div>
<div>./kal -c 1004 -R B:0</div>
<div>kal: Calculating clock frequency offset.</div>
<div>Using E-GSM-900 channel 1004 (931.0MHz)</div>
<div>average         [min, max]      (range, stddev)</div>
<div>+   1Hz         [-13, 19]       (32, 8.658517)</div>
<div>overruns: 0</div>
<div>not found: 0  </div></div>
<div> </div>
<div>Best Regards.</div>
<div> </div>
<hr style="min-height:1px;WIDTH:210px" align="left" color="#b5c4df" size="1"><span class="HOEnZb"><font color="#888888">

<div><span>jiangwy</span></div>
<div> </div>
</font></span><div style="BORDER-TOP:#b5c4df 1pt solid;BORDER-RIGHT:medium none;BORDER-BOTTOM:medium none;PADDING-BOTTOM:0cm;PADDING-TOP:3pt;PADDING-LEFT:0cm;BORDER-LEFT:medium none;PADDING-RIGHT:0cm">
<div style="padding-right:8px;padding-left:8px;padding-top:8px;background:#efefef;font-size:12px;padding-bottom:8px"><div class="im">
<div><b>From:</b> <a href="mailto:andreysviyaz@gmail.com" target="_blank">Andrey 
Sviyazov</a></div>
<div><b>Date:</b> 2013-08-03 00:54</div>
<div><b>To:</b> <a href="mailto:wyjiang@ljshuoda.com" target="_blank">wyjiang</a></div>
<div><b>CC:</b> <a href="mailto:umtrx@lists.osmocom.org" target="_blank">UmTRX</a>; <a href="mailto:alexander.chemeris@gmail.com" target="_blank">Alexander Chemeris</a></div>
</div><div><div class="h5"><div><b>Subject:</b> Re: Re: The Difference of Signal Strength From Two 
Channels on The Same Board is Big</div></div></div></div></div><div><div class="h5">
<div>
<div>Hi Jiang Wenyi.
<div><br></div>
<div>
<div>Please double check that both UmTRX's runs with the same FPGA images (and 
firmware).</div>
<div>If absolutely the same then seems one board is broken.</div>
<div>Please double check it also by some other tests to be sure before send 
to us for repair.</div></div>
<div><br></div>
<div>
<div>Best regards,
<div>Andrey Sviyazov.</div></div><br><br>
<div class="gmail_quote">2013/8/2 jiangwy <span dir="ltr"><<a href="mailto:wyjiang@ljshuoda.com" target="_blank">wyjiang@ljshuoda.com</a>></span><br>
<blockquote class="gmail_quote" style="PADDING-LEFT:1ex;MARGIN:0px 0px 0px 0.8ex;BORDER-LEFT:#ccc 1px solid"><u></u>
  <div style="MARGIN:10px">
  <div>I try another UmTRX board, and it's OK. The difference from the channel 0 
  and 1 is very small.</div>
  <div> </div>
  <hr style="MIN-HEIGHT:1px;WIDTH:210px" align="left" color="#b5c4df" size="1">

  <div><span>jiangwy</span></div>
  <div> </div>
  <div style="BORDER-TOP:#b5c4df 1pt solid;BORDER-RIGHT:medium none;BORDER-BOTTOM:medium none;PADDING-BOTTOM:0cm;PADDING-TOP:3pt;PADDING-LEFT:0cm;BORDER-LEFT:medium none;PADDING-RIGHT:0cm">
  <div style="FONT-SIZE:12px;BACKGROUND:#efefef;PADDING-BOTTOM:8px;PADDING-TOP:8px;PADDING-LEFT:8px;PADDING-RIGHT:8px">
  <div><b>From:</b> <a href="mailto:alexander.chemeris@gmail.com" target="_blank">Alexander Chemeris</a></div>
  <div><b>Date:</b> 2013-08-02 17:30</div>
  <div><b>To:</b> <a href="mailto:wyjiang@ljshuoda.com" target="_blank">wyjiang</a></div>
  <div><b>CC:</b> <a href="mailto:umtrx@lists.osmocom.org" target="_blank">UmTRX</a></div>
  <div><b>Subject:</b> Re: Re: The Difference of Signal Strength From Two 
  Channels on The Same Board is Big</div></div></div>
  <div>
  <div>
  <div>
  <div>Ok.</div>
  <div> </div>
  <div>Also check that a correct input is selected on both chips</div>
  <div>(--lms-get-rx-lna option).</div>
  <div> </div>
  <div>Then, could you check whether this is consistent among both UmTRX you have?</div>
  <div> </div>
  <div>On Fri, Aug 2, 2013 at 12:55 PM, jiangwy <<a href="mailto:wyjiang@ljshuoda.com" target="_blank">wyjiang@ljshuoda.com</a>> wrote:</div>
  <div>> I use the following command</div>
  <div>></div>
  <div>> ./umtrx_lms.py --lms {1,2} --lms-get-rx-vga2-gain</div>
  <div>></div>
  <div>> the outputs are all the same ( 15 ).</div>
  <div>></div>
  <div>> ________________________________</div>
  <div>> jiangwy</div>
  <div>></div>
  <div>> From: Alexander Chemeris</div>
  <div>> Date: 2013-08-02 16:20</div>
  <div>> To: wyjiang</div>
  <div>> CC: UmTRX</div>
  <div>> Subject: Re: The Difference of Signal Strength From Two Channels on The Same</div>
  <div>> Board is Big</div>
  <div>> Hi Jiang,</div>
  <div>></div>
  <div>> Are you sure you're setting Rx gain properly for both channels?</div>
  <div>> I recommend you to use umtrx_lms.py script from this repository to</div>
  <div>> check Rx LNA and Rx VGA settings for both LMS chips:</div>
  <div>> <a href="https://github.com/fairwaves/umtrx_scripts" target="_blank">https://github.com/fairwaves/umtrx_scripts</a></div>
  <div>></div>
  <div>> On Fri, Aug 2, 2013 at 12:09 PM, jiangwy <<a href="mailto:wyjiang@ljshuoda.com" target="_blank">wyjiang@ljshuoda.com</a>> wrote:</div>
  <div>>> Hi Alexander Chemeris,</div>
  <div>>></div>
  <div>>> According to rx_multi_samples , I write a program to receive samples from</div>
  <div>>> two channels on the same board.</div>
  <div>>> The program receive samples from 2 channels and calculate the signal</div>
  <div>>> strength respectively. The signal is from a BTS arround.</div>
  <div>>> I find the difference of signal strength is very big, about 20dB, and</div>
  <div>>> channel 1 is bigger than channel 0.</div>
  <div>>> I  exchange the antenna and feeder of the them, but the result is same.</div>
  <div>>> I think there is some problem, but I cann't find it.</div>
  <div>>> Would you please give me some sugguestion?</div>
  <div>>></div>
  <div>>> Best Regards.</div>
  <div>>></div>
  <div>>> ________________________________</div>
  <div>>> Jiang Wenyi</div>
  <div>></div>
  <div>></div>
  <div>></div>
  <div>> --</div>
  <div>> Regards,</div>
  <div>> Alexander Chemeris.</div>
  <div>> CEO, Fairwaves LLC / ООО УмРадио</div>
  <div>> <a href="http://fairwaves.ru" target="_blank">http://fairwaves.ru</a></div>
  <div>></div>
  <div> </div>
  <div> </div>
  <div> </div>
  <div>-- </div>
  <div>Regards,</div>
  <div>Alexander Chemeris.</div>
  <div>CEO, Fairwaves LLC / ООО УмРадио</div>
  <div><a href="http://fairwaves.ru" target="_blank">http://fairwaves.ru</a></div>
  <div> </div></div></div></div></div></blockquote></div><br></div></div></div></div></div></div>
</blockquote></div><br><br clear="all"><div><br></div>-- <br>Regards,<br>Alexander Chemeris.<br>CEO, Fairwaves LLC / ООО УмРадио<br><a href="http://fairwaves.ru" target="_blank">http://fairwaves.ru</a>
</div>