<div dir="ltr"><div><div>Hello,<br><br></div>I was wondering whether there is an FPGA image for the UmTRX which gives 4x DDC Rx chains (at the expense of the two DUC chains) like the USRP1 usrp1_fpga_4rx.rbf. I guess this is unlikely, due to the fact it looks like the majority of people are using the UmTRX for OpenBTS! How difficult would it be to change the current firmware to support this.<br>
<br></div>Another couple of questions, what's the maximum achievable bandwidth through a single Rx chain so far and are there any constraints on what value of decimation to use (e.g. USRP has the requirement that to use both CIC filters decimation factors have to be a factor of 4, otherwise the frequency response will be affected)? When I increase the sample rate (e.g. 4.333 MHz) I start seeing the frequency response affected, the FFT plot seems to 'flicker' between a reasonably flat looking response and a poor frequency response (see attached files - both taken from the same running instance of a flow graph)<br clear="all">
<div><div><div><br></div><div>Cheers,<br><br></div><div>John<br><br></div><div>-- <br><span style="color:rgb(153,153,153)"><span style="color:rgb(102,102,102)"><b>Dr. John Wilson</b></span><br><font size="1">Product development engineer, <a href="http://www.pathintelligence.com/" target="_blank"><span>Path Intelligence</span></a><br>

T <a value="+442392388442">+44 2392 388442</a>    @pathintel<br>
DETECT • ANALYSE • PREDICT • INFLUENCE<br><img src="http://www.pathintelligence.com/wp-content/uploads/2013/03/emailmarketingbanner.png"><br><br>
Path Intelligence Limited, registered number 5176274. Registered in England, <br>
registered office at 1000 Lakeside North Harbour, Western Road, Portsmouth, UK, PO6 3EN</font></span>
</div></div></div></div>